/****************************************************************************
**
** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QtAddOn.JsonDb module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia.  For licensing terms and
** conditions see http://qt.digia.com/licensing.  For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights.  These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qjsondbwatcher_p.h"
#include "qjsondbstrings_p.h"
#include "qjsondbconnection_p.h"

#include <QUuid>

QT_BEGIN_NAMESPACE_JSONDB

/*!
    \class QJsonDbNotification
    \inmodule QtJsonDb

    \brief The QJsonDbNotification class describes a database notification event.

    This is a single notification event that is emitted by QJsonDbWatcher class
    when an object matching a query string was changed in the database.

    \sa QJsonDbWatcher::notificationsAvailable(), QJsonDbWatcher::takeNotifications(), QJsonDbWatcher::query()
*/

/*!
    \internal
*/
QJsonDbNotification::QJsonDbNotification(const QJsonObject &object, QJsonDbWatcher::Action action, quint32 stateNumber)
    : obj(object), act(action), state(stateNumber), reserved(0)
{
}

/*!
    Returns the object that matched notification.

    \list

    \li If the action() is QJsonDbWatcher::Created, the object contains the full
    object that started matching the watcher query string.

    \li If the action() is QJsonDbWatcher::Updated, the object contains the
    latest version of the object.

    \li If the action() is QJsonDbWatcher::Removed, the object
    contains the \c{_uuid} and \c{_version} of the object that no
    longer matches the watcher query string, and the object contains
    the property \c{_deleted} with value \c{true}.

    \endlist

    \sa QJsonDbObject
*/
QJsonObject QJsonDbNotification::object() const
{
    return obj;
}

/*!
    Returns the notification action.

    \sa QJsonDbWatcher::query()
*/
QJsonDbWatcher::Action QJsonDbNotification::action() const
{
    return act;
}

/*!
    Set the placeholder \a placeHolder to be bound to value \a val in the query
    string. Note that '%' is the only placeholder mark supported by the query.
    The marker '%' should not be included in the \a placeHolder name.

    \code
        QJsonDbWatcher *watcher = new QJsonDbWatcher;
        query->setQuery(QStringLiteral("[?_type=\"Person\"][?firstName = %name]"));
        query->bindValue(QStringLiteral("name"), QLatin1String("Malcolm"));
    \endcode

    \sa query, boundValue(), boundValues(), clearBoundValues()
*/
void QJsonDbWatcher::bindValue(const QString &placeHolder, const QJsonValue &val)
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->bindings.insert(placeHolder, val);
}

/*!
    Returns the value for the \a placeHolder.
*/
QJsonValue QJsonDbWatcher::boundValue(const QString &placeHolder) const
{
    Q_D(const QJsonDbWatcher);
    return d->bindings.value(placeHolder, QJsonValue(QJsonValue::Undefined));
}

/*!
    Returns a map of the bound values.
*/
QMap<QString,QJsonValue> QJsonDbWatcher::boundValues() const
{
    Q_D(const QJsonDbWatcher);
    return d->bindings;
}

/*!
    Clears all bound values.
*/
void QJsonDbWatcher::clearBoundValues()
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->bindings.clear();
}

/*!
    Returns the state number that corresponds to the object in notification.
*/
quint32 QJsonDbNotification::stateNumber() const
{
    return state;
}

QJsonDbWatcherPrivate::QJsonDbWatcherPrivate(QJsonDbWatcher *q)
    : q_ptr(q), status(QJsonDbWatcher::Inactive),
      actions(QJsonDbWatcher::All), initialStateNumber(QJsonDbWatcherPrivate::UnspecifiedInitialStateNumber), lastStateNumber(0)
{
    uuid = QUuid::createUuid().toString();
}

/*!
    \class QJsonDbWatcher
    \inmodule QtJsonDb

    \brief The QJsonDbWatcher class allows to watch database changes.

    This class is used to configure what database changes should result in
    notification events. The notificationsAvailable() signal is emitted
    whenever an object matching the given \l{QJsonDbWatcher::query}{query} was
    created or updated or removed from the database (depending on the
    \l{QJsonDbWatcher::watchedActions}{action}). Notification events can be
    retrieved using the takeNotifications() functions.

    Each change in the database corresponds to the identifier of the change - a
    database state number - and QJsonDbWatcher class can be used to start
    watching for notifications events starting from the given
    initialStateNumber. The last state number that was known to the watcher can
    be retrieved using \l{QJsonDbWatcher::lastStateNumber}{lastStateNumber}
    property.

    If the query matches a view type, then registering the watcher
    will also trigger an update of the view, if the view has not been
    updated to a state later than
    \l{QJsonDbWatcher::initialStateNumber}{initialStateNumber}, or the
    current state, if no state number is specified.

    QJsonDbWatcher should be registered within the database connection with
    QJsonDbConnection::addWatcher() function and only starts receiving database
    change notifications after it was successfully registered and
    \l{QJsonDbWatcher::Status}{status} was switched to QJsonDbWatcher::Active
    state.

    Whenever the database connection is established it re-activates all
    registered watchers, hence the watcher will be re-activated automatically
    if the connection to the database was dropped and established again.

    \code
        QtJsonDb::QJsonDbWatcher *watcher = new QtJsonDb::QJsonDbWatcher;
        watcher->setQuery(QStringLiteral("[?_type=\"Foo\"]"));
        QObject::connect(watcher, SIGNAL(notificationsAvailable(int)),
                         this, SLOT(onNotificationsAvailable(int)));
        QObject::connect(watcher, SIGNAL(error(QtJsonDb::QJsonDbWatcher::ErrorCode,QString)),
                         this, SLOT(onNotificationError(QtJsonDb::QJsonDbWatcher::ErrorCode,QString)));
        QtJsonDb::QJsonDbConnection *connection = new QtJsonDb::QJsonDbConnection;
        connection->addWatcher(watcher);
    \endcode
*/
/*!
    \enum QJsonDbWatcher::Action

    This enum describes possible actions that can be watched. By default
    watcher is set to watch All actions.

    \value Created Watches for objects to start matching the given query string.
    \value Updated Watches for modifications of objects matching the given query.
    \value Removed Watches for objects that stop matching the given query string.
    \value All A convenience value that specifies to watch for all possible actions.
*/
/*!
    \enum QJsonDbWatcher::Status

    This enum describes watcher status.

    \value Inactive The watcher does not current watch database changes.
    \value Activating The watcher is being activated.
    \value Active The watcher is successfully setup to watch for database changes.
*/
/*!
    \enum QJsonDbWatcher::ErrorCode

    This enum describes possible errors that can happen when activating the watcher.

    \value NoError
    \value InvalidRequest
    \value OperationNotPermitted
    \value InvalidPartition the given partition is incorrect.
    \value DatabaseConnectionError
    \value MissingQuery
    \value InvalidStateNumber
*/

/*!
    Constructs a new QJsonDbWatcher object with a given \a parent.

    \sa QJsonDbConnection::addWatcher()
*/
QJsonDbWatcher::QJsonDbWatcher(QObject *parent)
    : QObject(parent), d_ptr(new QJsonDbWatcherPrivate(this))
{

}
/*!
    Destroys the QJsonDbWatcher object.
*/
QJsonDbWatcher::~QJsonDbWatcher()
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive && d->connection)
        d->connection.data()->d_func()->removeWatcher(this);
}

/*!
    \property QJsonDbWatcher::status
    Specifies the current watcher status.

    The statusChanged() signal is emitted when state of the watcher is changed.
*/
QJsonDbWatcher::Status QJsonDbWatcher::status() const
{
    Q_D(const QJsonDbWatcher);
    return d->status;
}

/*!
    \property QJsonDbWatcher::watchedActions
    Specifies which actions the watcher is registered for.
*/
void QJsonDbWatcher::setWatchedActions(QJsonDbWatcher::Actions actions)
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->actions = actions;
}

QJsonDbWatcher::Actions QJsonDbWatcher::watchedActions() const
{
    Q_D(const QJsonDbWatcher);
    return d->actions;
}

/*!
    \property QJsonDbWatcher::query
    Specifies the query this watcher is registered for.

    Notifications will be delivered to the watcher for any changes
    that match the query. For object creation, a change matches the
    query if the query matches the object.

    For object update or removal, a change matches the query if either
    the initial state or final state of the object matches the
    query. If the change matches the query in its initial state but
    not it final state, then the action is reported as
    QJsonDbWatcher::Removed. If the change matches the query in its
    final state but not its initial state, the action is reported as
    QJsonDbWatcher::Created.

 */
void QJsonDbWatcher::setQuery(const QString &query)
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->query = query;
}

QString QJsonDbWatcher::query() const
{
    Q_D(const QJsonDbWatcher);
    return d->query;
}

/*!
    \property QJsonDbWatcher::partition
    Specifies the partition this watcher is registered for.
*/
void QJsonDbWatcher::setPartition(const QString &partition)
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->partition = partition;
}

QString QJsonDbWatcher::partition() const
{
    Q_D(const QJsonDbWatcher);
    return d->partition;
}

/*!
    \property QJsonDbWatcher::initialStateNumber

    Specifies from which database state number the watcher should start
    watching for notifications.

    Defaults to 0, specifying to watch for live database changes only.

    If stateNumber is 0xFFFFFFFF (-1), then the watcher will receive a
    notification for every object in the database matching query and
    then will receive ongoing notifications as actions are performed
    on matching objects.

    For state numbers in the past, the watcher will receive
    notifications for actions starting at the initialStateNumber.

    \sa lastStateNumber()
*/
void QJsonDbWatcher::setInitialStateNumber(quint32 stateNumber)
{
    Q_D(QJsonDbWatcher);
    if (d->status != QJsonDbWatcher::Inactive)
        qWarning("QJsonDbWatcher: should not change already active watcher.");
    d->initialStateNumber = stateNumber;
    d->lastStateNumber = 0; // reset last seen state number
}

quint32 QJsonDbWatcher::initialStateNumber() const
{
    Q_D(const QJsonDbWatcher);
    return d->initialStateNumber;
}

/*!
    \property QJsonDbWatcher::lastStateNumber

    Indicates the last database state number for which the watcher received notifications.

    This property contains valid data only after watcher was successfully
    activated (i.e. the watcher state was changed to QJsonDbWatcher::Active).

    The lastStateNumber will be changed after receiving all notifications for that state number.

    This lastStateNumberChanged() signal is emitted when the given stateNumber
    is fully processed - all notifications for it were successfully received.

    \sa status
*/
quint32 QJsonDbWatcher::lastStateNumber() const
{
    Q_D(const QJsonDbWatcher);
    return d->lastStateNumber;
}

/*!
    Returns the first \a amount of notification events from the watcher.

    If amount is -1, retrieves all available notifications events.

    \sa notificationsAvailable()
*/
QList<QJsonDbNotification> QJsonDbWatcher::takeNotifications(int amount)
{
    Q_D(QJsonDbWatcher);
    QList<QJsonDbNotification> list;
    if (amount < 0 || amount >= d->notifications.size()) {
        list.swap(d->notifications);
    } else {
        list = d->notifications.mid(0, amount);
        d->notifications.erase(d->notifications.begin(), d->notifications.begin() + amount);
    }
    return list;
}

void QJsonDbWatcherPrivate::setStatus(QJsonDbWatcher::Status newStatus)
{
    Q_Q(QJsonDbWatcher);
    if (status != newStatus) {
        status = newStatus;
        emit q->statusChanged(status);
    }
}

void QJsonDbWatcherPrivate::_q_onFinished()
{
    Q_Q(QJsonDbWatcher);
    Q_ASSERT(status != QJsonDbWatcher::Inactive);
    QJsonDbWriteRequest *request = qobject_cast<QJsonDbWriteRequest *>(q->sender());
    Q_ASSERT(request);
    QList<QJsonObject> objects = request->objects();
    Q_ASSERT(objects.size() == 1);
    if (!objects.at(0).value(JsonDbStrings::Property::deleted()).toBool(false)) {
        // got a success reply to notification creation
        QList<QJsonObject> results = request->takeResults();
        Q_ASSERT(results.size() == 1);
        version = results.at(0).value(JsonDbStrings::Property::version()).toString();
        setStatus(QJsonDbWatcher::Active);
    } else {
        // got a success reply to notification deletion
        setStatus(QJsonDbWatcher::Inactive);
    }
}

void QJsonDbWatcherPrivate::_q_onError(QtJsonDb::QJsonDbRequest::ErrorCode code, const QString &message)
{
    Q_Q(QJsonDbWatcher);
    Q_UNUSED(code);
    QJsonDbWatcher::ErrorCode error = static_cast<QJsonDbWatcher::ErrorCode>(code);
    emit q->error(error, message);
}

void QJsonDbWatcherPrivate::handleNotification(quint32 stateNumber, QJsonDbWatcher::Action action, const QJsonObject &object)
{
    Q_Q(QJsonDbWatcher);
    if (!actions.testFlag(action))
        return;
    Q_ASSERT(!object.isEmpty());
    if (initialStateNumber == static_cast<quint32>(QJsonDbWatcherPrivate::UnspecifiedInitialStateNumber))
        initialStateNumber = stateNumber;
    QJsonDbNotification n(object, action, stateNumber);
    notifications.append(n);
    emit q->notificationsAvailable(notifications.size());
}

void QJsonDbWatcherPrivate::handleStateChange(quint32 stateNumber)
{
    Q_Q(QJsonDbWatcher);
    if (stateNumber != lastStateNumber) {
        lastStateNumber = stateNumber;
        emit q->lastStateNumberChanged(stateNumber);
    }
}

/*!
    \fn bool QJsonDbWatcher::isInactive() const
    Returns true if the status of the watcher is QJsonDbWatcher::Inactive.
    \sa status
*/
/*!
    \fn bool QJsonDbWatcher::isActivating() const
    Returns true if the status of the watcher is QJsonDbWatcher::Activating.
    \sa status
*/
/*!
    \fn bool QJsonDbWatcher::isActive() const
    Returns true if the status of the watcher is QJsonDbWatcher::Active.
    \sa status
*/
/*!
    \fn void QJsonDbWatcher::notificationsAvailable(int count)

    This signal is emitted when the \l{QJsonDbWatcher::isActive()}{active}
    watcher receives database notification events. \a count specifies how many
    events are available so far.

    \sa takeNotifications()
*/
/*!
    \fn void QJsonDbWatcher::error(QtJsonDb::QJsonDbWatcher::ErrorCode code, const QString &message);

    This signal is emitted when an error occured while activating the watcher.
    \a code and \a message describe the error.
*/

#include "moc_qjsondbwatcher.cpp"

QT_END_NAMESPACE_JSONDB