Fixed words jammed together

Author: chrisda

exchange/exchange-ps/exchange/client-access-servers/Get-ClientAccessServer.md

@@ -87,7 +87,7 @@ Accept wildcard characters: False
 ```
 
 ### -IncludeAlternateServiceAccountCredentialPassword
-The IncludeAlternateServiceAccountCredentialPasswordswitch specifies whether to include the password of the alternate service account in the results. You don't need to specify a value with this switch.
+The IncludeAlternateServiceAccountCredentialPassword switch specifies whether to include the password of the alternate service account in the results. You don't need to specify a value with this switch.
 
 The password is visible in the AlternateServiceAccountConfiguration property. To see this property, use the Format-List cmdlet. For example, Get-ClientAccessServer \<ServerIdentity\> | Format-List AlternateServiceAccountConfiguration.
 

exchange/exchange-ps/exchange/client-access-servers/Set-ClientAccessServer.md

@@ -159,7 +159,7 @@ Accept wildcard characters: False
 ```
 
 ### -CleanUpInvalidAlternateServiceAccountCredentials
-The CleanUpInvalidAlternateServiceAccountCredentialsswitch specifies whether to remove a previously configured alternate service account that's no longer valid. You don't need to specify a value with this switch.
+The CleanUpInvalidAlternateServiceAccountCredentials switch specifies whether to remove a previously configured alternate service account that's no longer valid. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -316,7 +316,7 @@ Accept wildcard characters: False
 ```
 
 ### -RemoveAlternateServiceAccountCredentials
-The RemoveAlternateServiceAccountCredentialsswitch specifies whether to remove a previously distributed alternate service account. You don't need to specify a value with this switch.
+The RemoveAlternateServiceAccountCredentials switch specifies whether to remove a previously distributed alternate service account. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/client-access-servers/Set-ClientAccessService.md

@@ -139,7 +139,7 @@ Accept wildcard characters: False
 ```
 
 ### -CleanUpInvalidAlternateServiceAccountCredentials
-The CleanUpInvalidAlternateServiceAccountCredentialsswitch specifies whether to remove a previously configured alternate service account that's no longer valid. You don't need to specify a value with this switch.
+The CleanUpInvalidAlternateServiceAccountCredentials switch specifies whether to remove a previously configured alternate service account that's no longer valid. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -188,7 +188,7 @@ Accept wildcard characters: False
 ```
 
 ### -RemoveAlternateServiceAccountCredentials
-The RemoveAlternateServiceAccountCredentialsswitch specifies whether to remove a previously distributed alternate service account. You don't need to specify a value with this switch.
+The RemoveAlternateServiceAccountCredentials switch specifies whether to remove a previously distributed alternate service account. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/database-availability-groups/Set-DatabaseAvailabilityGroup.md

@@ -237,9 +237,9 @@ Accept wildcard characters: False
 ```
 
 ### -DiscoverNetworks
-The DiscoverNetworksswitch specifies whether to force a rediscovery of the network and network interfaces. You don't need to specify a value with this switch.
+The DiscoverNetworks switch specifies whether to force a rediscovery of the network and network interfaces. You don't need to specify a value with this switch.
 
-By default, internal network heartbeats are sent between DAG members on the same subnet. If there's no response to the heartbeats, network discovery is performed automatically by the system. If you add or remove networks or change DAG network subnets, you can force rediscovery of all DAG networks by using the DiscoverNetworksswitch.
+By default, internal network heartbeats are sent between DAG members on the same subnet. If there's no response to the heartbeats, network discovery is performed automatically by the system. If you add or remove networks or change DAG network subnets, you can force rediscovery of all DAG networks by using the DiscoverNetworks switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/database-availability-groups/Update-MailboxDatabaseCopy.md

@@ -170,7 +170,7 @@ Accept wildcard characters: False
 ```
 
 ### -CatalogOnly
-The CatalogOnlyswitch specifies that only the content index catalog for the database copy should be seeded. You don't need to specify a value with this switch.
+The CatalogOnly switch specifies that only the content index catalog for the database copy should be seeded. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -204,7 +204,7 @@ Accept wildcard characters: False
 ```
 
 ### -DatabaseOnly
-The DatabaseOnlyswitch specifies that only the database copy should be seeded. The content index catalog isn't seeded. You don't need to specify a value with this switch.
+The DatabaseOnly switch specifies that only the database copy should be seeded. The content index catalog isn't seeded. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -373,7 +373,7 @@ Accept wildcard characters: False
 ```
 
 ### -SafeDeleteExistingFiles
-The SafeDeleteExistingFilesswitch specifies a seeding operation with a single copy redundancy pre-check prior to the seed. You don't need to specify a value with this switch.
+The SafeDeleteExistingFiles switch specifies a seeding operation with a single copy redundancy pre-check prior to the seed. You don't need to specify a value with this switch.
 
 Because this switch includes the redundancy safety check, it requires a lower level of permissions than the DeleteExistingFiles parameter. Limited permission administrators can perform the seeding operation by using this switch.
 

exchange/exchange-ps/exchange/mailbox-databases-and-servers/Set-MailboxDatabase.md

@@ -151,7 +151,7 @@ Accept wildcard characters: False
 ```
 
 ### -AutoDagExcludeFromMonitoring
-The AutoDagExcludedFromMonitoringparameter specifies whether to exclude the mailbox database from the ServerOneCopyMonitor, which alerts an administrator when a replicated database has only one healthy copy available. Valid values are:
+The AutoDagExcludedFromMonitoring parameter specifies whether to exclude the mailbox database from the ServerOneCopyMonitor, which alerts an administrator when a replicated database has only one healthy copy available. Valid values are:
 
 - $true: No alert is issued when there's only one healthy copy of the replicated database.
 

exchange/exchange-ps/exchange/mailboxes/Get-MailboxFolderStatistics.md

@@ -60,14 +60,14 @@ This example uses the FolderScope parameter to view the statistics for calendar
 Get-MailboxFolderStatistics -Identity [email protected] -Archive
 ```
 
-This example uses the Archiveswitch to view the statistics for Ayla's archive.
+This example uses the Archive switch to view the statistics for Ayla's archive.
 
 ### -------------------------- Example 4 --------------------------
 ```
 Get-MailboxFolderStatistics -Identity "Tony" -FolderScope RecoverableItems -IncludeAnalysis
 ```
 
-This example uses the IncludeAnalysisswitch to view the statistics of Tony's Recoverable Items folder.
+This example uses the IncludeAnalysis switch to view the statistics of Tony's Recoverable Items folder.
 
 ## PARAMETERS
 
@@ -124,7 +124,7 @@ Accept wildcard characters: False
 ```
 
 ### -Archive
-The Archiveswitch specifies whether to return the usage statistics of the archive associated with the mailbox or mail user. You don't need to specify a value with this switch.
+The Archive switch specifies whether to return the usage statistics of the archive associated with the mailbox or mail user. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -249,7 +249,7 @@ Accept wildcard characters: False
 ```
 
 ### -IncludeAnalysis
-The IncludeAnalysisswitch specifies whether to scan all items within a folder and return statistics related to the folder and item size. You don't need to specify a value with this switch.
+The IncludeAnalysis switch specifies whether to scan all items within a folder and return statistics related to the folder and item size. You don't need to specify a value with this switch.
 
 You should use this switch for troubleshooting purposes, because the command might take a long time to complete.
 
@@ -266,7 +266,7 @@ Accept wildcard characters: False
 ```
 
 ### -IncludeOldestAndNewestItems
-The IncludeOldestAndNewestItemsswitch specifies whether to return the dates of the oldest and newest items in each folder. You don't need to specify a value with this switch.
+The IncludeOldestAndNewestItems switch specifies whether to return the dates of the oldest and newest items in each folder. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/mailboxes/New-App.md

@@ -340,7 +340,7 @@ Accept wildcard characters: False
 ```
 
 ### -MarketplaceQueryMarket
-The MarketplaceQueryMarket parameter specifies the locale that an app is filed under at the office marketplace. For example, an app for the United States market in English uses the value en-US. The default value isen-US.
+The MarketplaceQueryMarket parameter specifies the locale that an app is filed under at the office marketplace. For example, an app for the United States market in English uses the value en-US. The default value is en-US.
 
 ```yaml
 Type: String
@@ -385,7 +385,7 @@ Accept wildcard characters: False
 ```
 
 ### -OrganizationApp
-The OrganizationAppswitch specifies that the scope of the app is organizational (not bound to a specific user). You don't need to specify a value with this switch.
+The OrganizationApp switch specifies that the scope of the app is organizational (not bound to a specific user). You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -451,7 +451,7 @@ Accept wildcard characters: False
 ```
 
 ### -UserList
-The UserList parameter specifies who can usean organizational app. Valid values are mailboxes or mail users in your organization. You can use any value that uniquely identifies the user.
+The UserList parameter specifies who can use an organizational app. Valid values are mailboxes or mail users in your organization. You can use any value that uniquely identifies the user.
 
 For example:
 

exchange/exchange-ps/exchange/mailboxes/Set-UserPhoto.md

@@ -105,9 +105,9 @@ This example deletes the preview photo that was uploaded in the previous example
 ## PARAMETERS
 
 ### -Cancel
-The Cancelswitch parameter deletes the photo that's currently uploaded as the preview photo. You don't need to specify a value with this switch.
+The Cancel switch parameter deletes the photo that's currently uploaded as the preview photo. You don't need to specify a value with this switch.
 
-To delete the photo that's currently associated with a user's account, use the Remove-UserPhotocmdlet. The Cancelswitch only deletes the preview photo.
+To delete the photo that's currently associated with a user's account, use the Remove-UserPhoto cmdlet. The Cancel switch only deletes the preview photo.
 
 ```yaml
 Type: SwitchParameter
@@ -217,9 +217,9 @@ Accept wildcard characters: False
 ```
 
 ### -Preview
-The Previewswitch uploads a preview photo for the user account. You don't need to specify a value with this switch.
+The Preview switch uploads a preview photo for the user account. You don't need to specify a value with this switch.
 
-A preview photo is the photo object that is uploaded to the user's account, but isn't saved. For example, if a user uploads a photo in Outlook on the web Options to preview before saving it. If you use the Previewswitch to upload a preview photo, you need to run the command Set-UserPhoto -Save to save it as the user's photo.
+A preview photo is the photo object that is uploaded to the user's account, but isn't saved. For example, if a user uploads a photo in Outlook on the web Options to preview before saving it. If you use the Preview switch to upload a preview photo, you need to run the command Set-UserPhoto -Save to save it as the user's photo.
 
 ```yaml
 Type: SwitchParameter
@@ -234,7 +234,7 @@ Accept wildcard characters: False
 ```
 
 ### -Save
-The Saveswitch specifies that the photo that's uploaded to the user's account will be saved as the user's photo. You don't need to specify a value with this switch.
+The Save switch specifies that the photo that's uploaded to the user's account will be saved as the user's photo. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/move-and-migration/New-MigrationBatch.md

@@ -501,7 +501,7 @@ Accept wildcard characters: False
 ### -AllowUnknownColumnsInCsv
 The AllowUnknownColumnsInCsv parameter specifies whether to allow extra columns in the CSV file that aren't used by migration. Valid values are:
 
-- $true: The migration ignores (silently skips) unknown columns in the CSV file (including optional columnswithmisspelledcolumn headers). All unknown columns are treated like extra columns that aren't used by migration.
+- $true: The migration ignores (silently skips) unknown columns in the CSV file (including optional columns with misspelled column headers). All unknown columns are treated like extra columns that aren't used by migration.
 
 - $false: The migration fails if there are any unknown columns in the CSV file.This setting protects against spelling errors in column headers. This is the default value.
 
@@ -518,7 +518,7 @@ Accept wildcard characters: False
 ```
 
 ### -ArchiveOnly
-The ArchiveOnlyswitchspecifies that only archive mailboxes are migrated for the users in the migration batch (primary mailboxes aren't migrated). You don't need to specify a value with this switch.
+The ArchiveOnly switch specifies that only archive mailboxes are migrated for the users in the migration batch (primary mailboxes aren't migrated). You don't need to specify a value with this switch.
 
 You can only use this switch for local moves and remote move migrations.
 
@@ -537,7 +537,7 @@ Accept wildcard characters: False
 ```
 
 ### -AutoComplete
-The AutoCompleteswitch forces the finalization of the individual mailboxes as soon as the mailbox has completed initial synchronization. You don't need to specify a value with this switch.
+The AutoComplete switch forces the finalization of the individual mailboxes as soon as the mailbox has completed initial synchronization. You don't need to specify a value with this switch.
 
 You can only use this switch for local moves and remote move migrations.
 
@@ -573,7 +573,7 @@ Accept wildcard characters: False
 ```
 
 ### -AutoStart
-The AutoStartswitch immediately starts the processing of the new migration batch. You don't need to specify a value with this switch.
+The AutoStart switch immediately starts the processing of the new migration batch. You don't need to specify a value with this switch.
 
 If you don't use this switch, you need to manually start the migration batch by using the Start-MigrationBatch cmdlet.
 
@@ -655,7 +655,7 @@ Accept wildcard characters: False
 ```
 
 ### -DisableOnCopy
-The DisableOnCopyswitch disables the original migration job item for a user if you're copying users from an existing batch to a new batch by using the UserIds or Users parameters.. You don't need to specify a value with this switch.
+The DisableOnCopy switch disables the original migration job item for a user if you're copying users from an existing batch to a new batch by using the UserIds or Users parameters.. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -672,7 +672,7 @@ Accept wildcard characters: False
 ### -DisallowExistingUsers
 This parameter is available only in on-premises Exchange.
 
-The DisallowExistingUsersswitch prevents the migration of mailboxes that are currently defined in a different migration batch. You don't need to specify a value with this switch.
+The DisallowExistingUsers switch prevents the migration of mailboxes that are currently defined in a different migration batch. You don't need to specify a value with this switch.
 
 A validation warning is displayed for any pre-existing mailbox in the target destination.
 

exchange/exchange-ps/exchange/move-and-migration/New-MigrationEndpoint.md

@@ -359,7 +359,7 @@ Accept wildcard characters: False
 ```
 
 ### -ExchangeRemoteMove
-The ExchangeRemoteMoveswitch specifies the type of endpoint for cross-forest moves and remote move migrations in a hybrid deployment. You don't need to specify a value with this switch.
+The ExchangeRemoteMove switch specifies the type of endpoint for cross-forest moves and remote move migrations in a hybrid deployment. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -376,7 +376,7 @@ Accept wildcard characters: False
 ### -IMAP
 This parameter is available only in the cloud-based service.
 
-The IMAPswitch specifies the type of endpoint for IMAP migrations. You don't need to specify a value with this switch.
+The IMAP switch specifies the type of endpoint for IMAP migrations. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/move-and-migration/New-MoveRequest.md

@@ -512,9 +512,9 @@ Accept wildcard characters: False
 ```
 
 ### -ArchiveOnly
-The ArchiveOnlyswitch specifies that you're moving only the personal archive associated with the mailbox.
+The ArchiveOnly switch specifies that you're moving only the personal archive associated with the mailbox.
 
-You can't use this switch with the PrimaryOnlyswitch.
+You can't use this switch with the PrimaryOnly switch.
 
 ```yaml
 Type: SwitchParameter
@@ -664,7 +664,7 @@ Accept wildcard characters: False
 ### -DoNotPreserveMailboxSignature
 This parameter is available only in on-premises Exchange.
 
-The DoNotPreserveMailboxSignatureswitch specifies that the move doesn't preserve the mailbox mapping signature. You don't need to specify a value with this switch.
+The DoNotPreserveMailboxSignature switch specifies that the move doesn't preserve the mailbox mapping signature. You don't need to specify a value with this switch.
 
 We recommend that you use this switch only if the move request fails because the Named Property identifiers are depleted. If you use this parameter, the user must restart Outlook when the move request is complete.
 
@@ -681,7 +681,7 @@ Accept wildcard characters: False
 ```
 
 ### -ForceOffline
-The ForceOfflineswitch forces the mailbox move to be performed in offline mode. You don't need to specify a value with this switch.
+The ForceOffline switch forces the mailbox move to be performed in offline mode. You don't need to specify a value with this switch.
 
 Moving a mailbox in offline mode means the user will have no access to email during the mailbox move.
 
@@ -700,7 +700,7 @@ Accept wildcard characters: False
 ### -ForcePull
 This parameter is available only in on-premises Exchange.
 
-The ForcePullswitch specifies that the type of local move should be a Pull move. You don't need to specify a value with this switch.
+The ForcePull switch specifies that the type of local move should be a Pull move. You don't need to specify a value with this switch.
 
 You use this parameter only for local moves.
 
@@ -719,7 +719,7 @@ Accept wildcard characters: False
 ### -ForcePush
 This parameter is available only in on-premises Exchange.
 
-The ForcePushswitch specifies that the type of local move should be a Push move. You don't need to specify a value with this switch.
+The ForcePush switch specifies that the type of local move should be a Push move. You don't need to specify a value with this switch.
 
 You use this parameter only for local moves.
 

exchange/exchange-ps/exchange/server-health-and-performance/Set-ServerComponentState.md

@@ -150,7 +150,7 @@ Accept wildcard characters: False
 ```
 
 ### -LocalOnly
-The LocalOnlyswitch specifies that the changes are written to the registry of the Exchange server only and not to Active Directory. You don't need to specify a value with this switch.
+The LocalOnly switch specifies that the changes are written to the registry of the Exchange server only and not to Active Directory. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter
@@ -165,7 +165,7 @@ Accept wildcard characters: False
 ```
 
 ### -RemoteOnly
-The RemoteOnlyswitch specifies that the changes are written to Active Directory only and not to the registry of the Exchange server. You don't need to specify a value with this switch.
+The RemoteOnly switch specifies that the changes are written to Active Directory only and not to the registry of the Exchange server. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter