Merge pull request MicrosoftDocs#7262 from MicrosoftDocs/chrisda

Cleaned up Ex2013 availability parameters

Author: chrisda

exchange/exchange-ps/exchange/Disable-MailPublicFolder.md

@@ -99,7 +99,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter specifies the Exchange server where you want to run this command. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Enable-MailPublicFolder.md

@@ -124,13 +124,15 @@ Accept wildcard characters: False
 ```
 
 ### -OverrideRecipientQuotas
+This parameter is available only in the cloud-based service.
+
 This parameter is reserved for internal Microsoft use.
 
 ```yaml
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -140,7 +142,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter specifies the Exchange server where you want to run this command. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Enable-Mailbox.md

@@ -867,7 +867,7 @@ Accept wildcard characters: False
 ```
 
 ### -ManagedFolderMailboxPolicy
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The ManagedFolderMailboxPolicy parameter specifies the managed folder mailbox policy to enable for the mailbox that you create. If you don't specify this parameter, the default managed folder mailbox policy is used.
 
@@ -885,7 +885,7 @@ Accept wildcard characters: False
 ```
 
 ### -ManagedFolderMailboxPolicyAllowed
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available in Exchange Server 2010.
 
 The ManagedFolderMailboxPolicyAllowed parameter specifies whether to bypass the warning that messaging records management (MRM) features aren't supported for  clients using versions of Outlook earlier than Office Outlook 2007. When a managed folder mailbox policy is assigned to a mailbox using the ManagedFolderMailboxPolicy parameter, the warning appears by default unless the ManagedFolderMailboxPolicyAllowed parameter is used.
 

exchange/exchange-ps/exchange/Export-JournalRuleCollection.md

@@ -106,7 +106,7 @@ Accept wildcard characters: False
 ```
 
 ### -ExportLegacyRules
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The ExportLegacyRules switch specifies whether to export Exchange 2007 journal rules.
 

exchange/exchange-ps/exchange/Export-TransportRuleCollection.md

@@ -121,7 +121,7 @@ Accept wildcard characters: False
 ```
 
 ### -ExportLegacyRules
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The ExportLegacyRules switch is required to export transport rules from Exchange 2007. You don't need to specify a value with this switch.
 

exchange/exchange-ps/exchange/Get-EmailAddressPolicy.md

@@ -97,7 +97,7 @@ The attributes of address policies that contain only mailbox management configur
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Server 2010
+Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/Get-IntraOrganizationConfiguration.md

@@ -52,7 +52,7 @@ The OrganizationGuid parameter specifies the on-premises organization in a hybri
 Type: OnPremisesOrganizationIdParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
+Applicable: Exchange Online
 
 Required: False
 Position: 2

exchange/exchange-ps/exchange/Get-MailPublicFolder.md

@@ -233,7 +233,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter filters the results by the specified Exchange server. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Get-MailboxDatabase.md

@@ -166,7 +166,7 @@ Accept wildcard characters: False
 ```
 
 ### -IncludePreExchange2010
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The IncludePreExchange2010 switch specifies whether to return information about Exchange 2007 ore earlier mailbox databases. You don't need to specify a value with this switch.
 

exchange/exchange-ps/exchange/Get-MailboxExportRequest.md

@@ -141,7 +141,7 @@ Accept wildcard characters: False
 ```
 
 ### -Database
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Database parameter specifies the database in which the user's mailbox or archive resides. You can use any value that uniquely identifies the database. For example:
 

exchange/exchange-ps/exchange/Get-MailboxExportRequestStatistics.md

@@ -124,7 +124,7 @@ Accept wildcard characters: False
 ```
 
 ### -MRSInstance
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
 

exchange/exchange-ps/exchange/Get-MailboxImportRequest.md

@@ -143,7 +143,7 @@ Accept wildcard characters: False
 ```
 
 ### -Database
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Database parameter specifies the database in which the user's mailbox or archive resides. You can use any value that uniquely identifies the database. For example:
 

exchange/exchange-ps/exchange/Get-MailboxImportRequestStatistics.md

@@ -123,7 +123,7 @@ Accept wildcard characters: False
 ```
 
 ### -MRSInstance
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
 

exchange/exchange-ps/exchange/Get-MailboxRestoreRequest.md

@@ -290,7 +290,7 @@ Accept wildcard characters: False
 ```
 
 ### -TargetDatabase
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The TargetDatabase parameter specifies that the cmdlet should only return restore requests for mailboxes that reside on the target database. You can use any value that uniquely identifies the database. For example:
 

exchange/exchange-ps/exchange/Get-MailboxRestoreRequestStatistics.md

@@ -123,7 +123,7 @@ Accept wildcard characters: False
 ```
 
 ### -MRSInstance
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
 

exchange/exchange-ps/exchange/Get-MapiVirtualDirectory.md

@@ -25,6 +25,7 @@ For information about the parameter sets in the Syntax section below, see [Excha
 Get-MapiVirtualDirectory -Server <ServerIdParameter>
  [-ADPropertiesOnly]
  [-DomainController <Fqdn>]
+ [-ShowMailboxVirtualDirectories]
  [<CommonParameters>]
 ```
 
@@ -33,6 +34,7 @@ Get-MapiVirtualDirectory -Server <ServerIdParameter>
 Get-MapiVirtualDirectory [[-Identity] <VirtualDirectoryIdParameter>]
  [-ADPropertiesOnly]
  [-DomainController <Fqdn>]
+ [-ShowMailboxVirtualDirectories]
  [<CommonParameters>]
 ```
 
@@ -145,6 +147,28 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -ShowMailboxVirtualDirectories
+This parameter is available only in Exchange Server 2013.
+
+The ShowMailboxVirtualDirectories switch shows information about backend virtual directories on Mailbox servers. You don't need to specify a value with this switch.
+
+By default, this cmdlet shows information about virtual directories in the Client Access services on Mailbox servers. Client connections are proxied from the Client Access services on Mailbox servers to the backend services on Mailbox servers. Clients don't connect directly to the backend services.
+
+We recommend that you use this parameter only under the direction of Microsoft Customer Service and Support.
+
+```yaml
+Type: SwitchParameter
+Parameter Sets: (All)
+Aliases:
+Applicable: Exchange Server 2013
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### CommonParameters
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](https://go.microsoft.com/fwlink/p/?LinkID=113216).
 

exchange/exchange-ps/exchange/Get-MoveRequestStatistics.md

@@ -158,7 +158,7 @@ Accept wildcard characters: False
 ```
 
 ### -MRSInstance
-This parameter is available or functional only in on-premises Exchange Server 2010.
+This parameter is available only in on-premises Exchange Server 2010.
 
 The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
 

exchange/exchange-ps/exchange/Get-PublicFolder.md

@@ -285,7 +285,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter filters the results by the specified Exchange server. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Get-PublicFolderClientPermission.md

@@ -89,7 +89,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter filters the results by the specified Exchange server. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Get-PublicFolderDatabase.md

@@ -136,7 +136,7 @@ Accept wildcard characters: False
 ```
 
 ### -IncludePreExchange2010
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The IncludePreExchange2010 switch specifies whether to include information about Exchange 2003 or Exchange 2007 public folders in the results. You don't need to specify a value with this switch.
 

exchange/exchange-ps/exchange/Get-PublicFolderItemStatistics.md

@@ -124,7 +124,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter filters the results by the specified Exchange server. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Get-PublicFolderStatistics.md

@@ -125,7 +125,7 @@ Accept wildcard characters: False
 ```
 
 ### -Server
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The Server parameter filters the results by the specified Exchange server. You can use any value that uniquely identifies the server. For example:
 

exchange/exchange-ps/exchange/Get-Recipient.md

@@ -200,13 +200,15 @@ Accept wildcard characters: False
 ```
 
 ### -Capabilities
+This parameter is available only in the cloud-based service.
+
 This parameter is reserved for internal Microsoft use.
 
 ```yaml
 Type: MultiValuedProperty
 Parameter Sets: AnrSet, Identity, RecipientPreviewFilterSet
 Aliases:
-Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Security & Compliance Center, Exchange Online Protection
+Applicable: Exchange Online, Security & Compliance Center, Exchange Online Protection
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/Get-RoleGroup.md

@@ -175,15 +175,15 @@ Accept wildcard characters: False
 ```
 
 ### -ShowPartnerLinked
-This parameter is available only in the cloud-based service.
+This parameter is available or functional only in the cloud-based service.
 
 This ShowPartnerLinked switch specifies whether to return built-in role groups that are of type PartnerRoleGroup. Role groups of this type are used in the cloud-based services to allow partner service providers to manage their customer organizations. These role groups can't be edited and are therefore not shown by default.
 
 ```yaml
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance Center, Exchange Online Protection
+Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Security & Compliance Center, Exchange Online Protection
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/New-ApplicationAccessPolicy.md

@@ -173,7 +173,7 @@ The Confirm switch specifies whether to show or hide the confirmation prompt. Ho
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases: cf
-Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Online
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -205,7 +205,7 @@ The WhatIf switch doesn't work on this cmdlet.
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases: wi
-Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Online
+Applicable: Exchange Online
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/New-AutodiscoverVirtualDirectory.md

@@ -230,7 +230,7 @@ Accept wildcard characters: False
 ```
 
 ### -ExternalUrl
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The ExternalUrl parameter specifies the URL used to connect to the virtual directory from outside the network firewall.
 
@@ -248,7 +248,7 @@ Accept wildcard characters: False
 ```
 
 ### -InternalUrl
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The InternalUrl parameter specifies the URL used to connect to the virtual directory from inside the network firewall.
 

exchange/exchange-ps/exchange/New-FederationTrust.md

@@ -219,7 +219,7 @@ Accept wildcard characters: False
 ```
 
 ### -SuppressDnsWarning
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The SuppressDNSWarning parameter specifies whether to display the DNS warning message for creating TXT records in your public DNS when running the New-FederationTrust cmdlet. Valid values are $true or $false. The default value is $false. However, this parameter is automatically set to $true when used by the Hybrid Configuration wizard. It's not recommended that you use this parameter when using the New-FederationTrust cmdlet.
 

exchange/exchange-ps/exchange/New-HybridConfiguration.md

@@ -59,7 +59,7 @@ This example creates the hybrid configuration Hybrid Configuration with the defa
 ## PARAMETERS
 
 ### -ClientAccessServers
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The ClientAccessServers parameter specifies the Exchange Server 2010 SP2 servers with the Client Access server role installed that will be configured to support the hybrid deployment features. At least one Client Access server must be defined and be externally accessible from the Internet on ports 80 and 443. The servers will be configured to enable the following:
 
@@ -225,7 +225,7 @@ Accept wildcard characters: False
 ```
 
 ### -SecureMailCertificateThumbprint
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The SecureMailCertificateThumbprint parameter specifies the thumbprint of the X.509 certificate to be used as the certificate for hybrid deployment secure message transport. This certificate cannot be self-signed, must be obtained from a trusted certificate authority (CA) and must be installed on all Hub Transport servers defined in the TransportServers parameter.
 
@@ -293,7 +293,7 @@ Accept wildcard characters: False
 ```
 
 ### -TransportServers
-This parameter is available or functional only in Exchange Server 2010.
+This parameter is available only in Exchange Server 2010.
 
 The TransportServers parameter specifies the Exchange Server 2010 SP2 servers with the Hub Transport server role installed that are configured to support the hybrid deployment features. At least one Hub Transport server must be defined and be externally accessible from the Internet for secure mail to be enabled between the on-premises and cloud-based organizations.