diff --git a/README.md b/README.md
index 70b2e3275a..3264f0f33c 100644
--- a/README.md
+++ b/README.md
@@ -221,6 +221,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :green_heart: | STM32C011J4
STM32C011J6 | Generic Board | *2.8.0* | |
| :green_heart: | STM32C031C4
STM32C031C6 | Generic Board | *2.5.0* | |
| :green_heart: | STM32C031F4
STM32C031F6 | Generic Board | *2.6.0* | |
+| :yellow_heart: | STM32C071G8
STM32C071GB | Generic Board | **2.11.0** | |
| :green_heart: | STM32C071R8
STM32C071RB | Generic Board | *2.9.0* | |
### Generic STM32F0 boards
diff --git a/boards.txt b/boards.txt
index 737597a70c..5f2842c6ff 100644
--- a/boards.txt
+++ b/boards.txt
@@ -1659,7 +1659,7 @@ GenC0.build.core=arduino
GenC0.build.board=GenC0
GenC0.build.mcu=cortex-m0plus
GenC0.build.series=STM32C0xx
-GenC0.build.st_extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0
+GenC0.build.st_extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
GenC0.build.flash_offset=0x0
GenC0.upload.maximum_size=0
GenC0.upload.maximum_data_size=0
@@ -1782,6 +1782,24 @@ GenC0.menu.pnum.GENERIC_C031F6PX.build.product_line=STM32C031xx
GenC0.menu.pnum.GENERIC_C031F6PX.build.variant=STM32C0xx/C031F(4-6)P
GenC0.menu.pnum.GENERIC_C031F6PX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32C0xx/STM32C031.svd
+# Generic C071G8Ux
+GenC0.menu.pnum.GENERIC_C071G8UX=Generic C071G8Ux
+GenC0.menu.pnum.GENERIC_C071G8UX.upload.maximum_size=65536
+GenC0.menu.pnum.GENERIC_C071G8UX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071G8UX.build.board=GENERIC_C071G8UX
+GenC0.menu.pnum.GENERIC_C071G8UX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071G8UX.build.variant=STM32C0xx/C071G(8-B)U
+GenC0.menu.pnum.GENERIC_C071G8UX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32C0xx/STM32C071.svd
+
+# Generic C071GBUx
+GenC0.menu.pnum.GENERIC_C071GBUX=Generic C071GBUx
+GenC0.menu.pnum.GENERIC_C071GBUX.upload.maximum_size=131072
+GenC0.menu.pnum.GENERIC_C071GBUX.upload.maximum_data_size=24576
+GenC0.menu.pnum.GENERIC_C071GBUX.build.board=GENERIC_C071GBUX
+GenC0.menu.pnum.GENERIC_C071GBUX.build.product_line=STM32C071xx
+GenC0.menu.pnum.GENERIC_C071GBUX.build.variant=STM32C0xx/C071G(8-B)U
+GenC0.menu.pnum.GENERIC_C071GBUX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32C0xx/STM32C071.svd
+
# Generic C071R8Tx
GenC0.menu.pnum.GENERIC_C071R8TX=Generic C071R8Tx
GenC0.menu.pnum.GENERIC_C071R8TX.upload.maximum_size=65536
@@ -1816,6 +1834,11 @@ GenC0.menu.upload_method.serialMethod.upload.protocol=serial
GenC0.menu.upload_method.serialMethod.upload.options=-c {serial.port.file}
GenC0.menu.upload_method.serialMethod.upload.tool=stm32CubeProg
+GenC0.menu.upload_method.dfuMethod=STM32CubeProgrammer (DFU)
+GenC0.menu.upload_method.dfuMethod.upload.protocol=dfu
+GenC0.menu.upload_method.dfuMethod.upload.options=-v {upload.vid} -p {upload.pid}
+GenC0.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
+
GenC0.menu.upload_method.bmpMethod=BMP (Black Magic Probe)
GenC0.menu.upload_method.bmpMethod.upload.protocol=gdb_bmp
GenC0.menu.upload_method.bmpMethod.upload.tool=bmp_upload
diff --git a/variants/STM32C0xx/C071G(8-B)U/generic_clock.c b/variants/STM32C0xx/C071G(8-B)U/generic_clock.c
index 2949052fd4..c20147de69 100644
--- a/variants/STM32C0xx/C071G(8-B)U/generic_clock.c
+++ b/variants/STM32C0xx/C071G(8-B)U/generic_clock.c
@@ -12,6 +12,7 @@
*/
#if defined(ARDUINO_GENERIC_C071G8UX) || defined(ARDUINO_GENERIC_C071GBUX)
#include "pins_arduino.h"
+#include "stm32yyxx_ll_utils.h"
/**
* @brief System Clock Configuration
@@ -20,8 +21,38 @@
*/
WEAK void SystemClock_Config(void)
{
- /* SystemClock_Config can be generated by STM32CubeMX */
-#warning "SystemClock_Config() is empty. Default clock at reset is used."
+ LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+
+ /* HSI configuration and activation */
+ LL_RCC_HSI_Enable();
+ while (LL_RCC_HSI_IsReady() != 1) {
+ }
+
+ LL_RCC_HSI_SetCalibTrimming(64);
+ LL_RCC_SetHSIDiv(LL_RCC_HSI_DIV_1);
+ LL_RCC_HSI48_Enable();
+
+ /* Wait till HSI48 is ready */
+ while (LL_RCC_HSI48_IsReady() != 1) {
+ }
+
+ /* Set AHB prescaler*/
+ LL_RCC_SetAHBPrescaler(LL_RCC_HCLK_DIV_1);
+
+ /* Sysclk activation on the HSI */
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI);
+ while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) {
+ }
+
+ /* Set APB1 prescaler*/
+ LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+ /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
+ LL_SetSystemCoreClock(48000000);
+
+ /* Update the time base */
+ if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) {
+ Error_Handler();
+ }
}
#endif /* ARDUINO_GENERIC_* */
diff --git a/variants/STM32C0xx/C071G(8-B)U/ldscript.ld b/variants/STM32C0xx/C071G(8-B)U/ldscript.ld
new file mode 100644
index 0000000000..9b17805ade
--- /dev/null
+++ b/variants/STM32C0xx/C071G(8-B)U/ldscript.ld
@@ -0,0 +1,187 @@
+/*
+******************************************************************************
+**
+** @file : LinkerScript.ld
+**
+** @author : Auto-generated by STM32CubeIDE
+**
+** @brief : Linker script for STM32C071G8Ux Device from STM32C0 series
+** 64KBytes FLASH
+** 24KBytes RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+******************************************************************************
+** @attention
+**
+** Copyright (c) 2025 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
+ FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
+ {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
+ {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+ *(.RamFunc) /* .RamFunc sections */
+ *(.RamFunc*) /* .RamFunc* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section into "RAM" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}