Merge branch 'master' into patch-295

Author: Kateyanne

exchange/exchange-ps/exchange/Clear-ActiveSyncDevice.md

@@ -134,7 +134,7 @@ Accept wildcard characters: False
 ```
 
 ### -NotificationEmailAddresses
-The NotificationEmailAddresses parameter specifies the notification email address for the remote device wipe confirmation.
+The NotificationEmailAddresses parameter specifies the notification email address for the remote device wipe confirmation. You can specify multiple values separated by commas.
 
 ```yaml
 Type: MultiValuedProperty

exchange/exchange-ps/exchange/Connect-Mailbox.md

@@ -367,7 +367,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Disconnect-ExchangeOnline.md

@@ -10,7 +10,6 @@ ms.author: chrisda
 ms.reviewer: navgupta
 ---
 
-
 # Disconnect-ExchangeOnline
 
 ## SYNOPSIS

exchange/exchange-ps/exchange/Enable-DistributionGroup.md

@@ -71,7 +71,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Enable-MailContact.md

@@ -93,7 +93,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Enable-MailUser.md

@@ -120,7 +120,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Enable-Mailbox.md

@@ -586,7 +586,7 @@ This parameter is available only in on-premises Exchange.
 
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Enable-RemoteMailbox.md

@@ -232,7 +232,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 

exchange/exchange-ps/exchange/Get-CASMailbox.md

@@ -96,7 +96,6 @@ Get-CASMailbox [email protected] | Format-List Ews*
 
 This example returns all Exchange Web Services settings for the user [email protected].
 
-
 ### Example 4
 ```powershell
 Get-CASMailbox -RecipientTypeDetails SharedMailbox | Select *

exchange/exchange-ps/exchange/Get-ClientAccessServer.md

@@ -74,7 +74,6 @@ Accept pipeline input: True
 Accept wildcard characters: False
 ```
 
-
 ### -DomainController
 The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
 

exchange/exchange-ps/exchange/Get-ComplianceCase.md

@@ -48,7 +48,6 @@ Get-ComplianceCase -Identity "Contoso Legal" | Format-List
 
 This example returns detailed information for the core eDiscovery case named Contoso Legal.
 
-
 ### Example 3
 ```powershell
 Get-ComplianceCase -CaseType AdvancedEdiscovery

exchange/exchange-ps/exchange/Get-EXOCasMailbox.md

@@ -435,7 +435,6 @@ The following Get-CasMailbox parameters are not available or supported in Get-EX
 - ReadIsOptimizedForAccessibility
 - SortBy
 
-
 ## OUTPUTS
 
 ###  

exchange/exchange-ps/exchange/Get-EXOMailbox.md

@@ -539,7 +539,6 @@ The following Get-Mailbox parameters aren't available or functional in Get-EXOMa
 - PublicFolder
 - SortBy
 
-
 ## OUTPUTS
 
 ###  

exchange/exchange-ps/exchange/Get-MailboxStatistics.md

@@ -222,7 +222,6 @@ You can use any value that uniquely identifies the server. For example:
 
 If you don't use this parameter, the command is run on the local server.
 
-
 ```yaml
 Type: ServerIdParameter
 Parameter Sets: Database, Identity

exchange/exchange-ps/exchange/Get-PublicFolderDatabase.md

@@ -135,8 +135,6 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
-
-
 ### -IncludePreExchange2010
 This parameter is available or functional only in Exchange Server 2010.
 

exchange/exchange-ps/exchange/Get-UMActiveCalls.md

@@ -128,7 +128,6 @@ Accept wildcard characters: False
 ### -IPGateway
 The IPGateway parameter specifies the UM IP gateway for which you want to retrieve active calls.
 
-
 You can't use the DialPlan, InstanceServer, IPGateway, or Server parameters in the same command.
 
 ```yaml

exchange/exchange-ps/exchange/Get-UnifiedAuditLogRetentionPolicy.md

@@ -50,7 +50,6 @@ Get-UnifiedAuditLogRetentionPolicy -RecordType ExchangeItem | Format-List Name,D
 
 This example lists the configurable properties for all audit log retention policies that apply to audit records the record type of ExchangeItem.
 
-
 ## PARAMETERS
 
 ### -Operation

exchange/exchange-ps/exchange/New-AntiPhishPolicy.md

@@ -617,7 +617,6 @@ The TargetedUserActionRecipients parameter specifies the replacement or additi
 
 A valid value for this parameter is an email address. You can specify multiple email addresses separated by commas.
 
-
 ```yaml
 Type: MultiValuedProperty
 Parameter Sets: (All)

exchange/exchange-ps/exchange/New-DistributionGroup.md

@@ -100,7 +100,7 @@ Accept wildcard characters: False
 ### -Alias
 The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.
 
-The value of Alias can contain letters, numbers and the characters: ``! # $ % & ' * + - / = ? ^ _ ` { | } ~``. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
+The value of Alias can contain letters, numbers and the following characters: !, #, $, %, &, ', \*, +, -, /, =, ?, ^, \_, \`, {, }, |, and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.
 
 When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (`alias@domain`). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.
 
@@ -539,7 +539,7 @@ Accept wildcard characters: False
 ### -SamAccountName
 This parameter is available only in on-premises Exchange.
 
-The SamAccountName parameter (also known as the pre-Windows 2000 user account or group name) specifies an object identifier that's compatible with older versions of Microsoft Windows client and server operating systems. The value can contain letters, numbers, spaces, periods (.), and the characters `! # $ % ^ & - _ { } ~`. The last character can't be a period. Unicode characters are allowed, but accented characters may generate collisions (for example, o and ö match). The maximum length is 20 characters.
+The SamAccountName parameter (also known as the pre-Windows 2000 user account or group name) specifies an object identifier that's compatible with older versions of Microsoft Windows client and server operating systems. The value can contain letters, numbers, spaces, periods (.), and the following characters: !, #, $, %, ^, &, -, \_, {, }, and ~. The last character can't be a period. Unicode characters are allowed, but accented characters may generate collisions (for example, o and ö match). The maximum length is 20 characters.
 
 ```yaml
 Type: String