STM32HAL库重写printf函数

开启USART串口

以串口1为例子，在usart.c中插入2段函数即可

/* USER CODE BEGIN 0 */

#include <stdio.h>
#include <string.h>
#ifdef __GNUC__

#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#define GETCHAR_PROTOTYPE int __io_getchar(FILE *f)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#define GETCHAR_PROTOTYPE int fgetc(FILE *f)
#endif /* __GNUC__ */

/* USER CODE END 0 */

/* USER CODE BEGIN 1 */

int fputc(int ch, FILE *f)
{
HAL_UART_Transmit(&huart1, (uint8_t *)&ch, 1, 0xffff);
return ch;
}

PUTCHAR_PROTOTYPE
{
	HAL_UART_Transmit(&huart1, (uint8_t *)&ch, 1, 0xFFFF);
    return ch;
}

/* USER CODE END 1 */

在main.c中测试：printf("Usart1 printf success!"); 成功复现！