wince5 编译 SDK 出错及解决办法

原创于 2010-03-12 11:13:00 发布 · 1k 阅读

0 ·

CC 4.0 BY-SA版权

文章标签：

#wince #build #system #wizard #variables #construction

WINCE 专栏收录该内容

2 篇文章

订阅专栏

本文介绍了解决在Platform Builder中编译SDK时遇到特定错误的方法。通过对比SysgenSettings.out与Anchored.txt文件，找出问题所在并进行修复。

在PB中编译SDK时提示如下错误：

    Error: This build configuration has not been sysgen'ed
    Error adding sysgen'ed headers and libs
    Error rolling toolkit-specific files
    MSI file construction completed. 3 error(s), 0 warning(s).

在MSDN中找到的官方解决办法如下：

To work around this problem, first verify that you have successfully built the operating system at least one time and that you have not modified the operating system design since the last successful build. Then, follow these steps:
    1. In Platform Builder 5.0, select the operating system configuration that you successfully built.
    2. To open a build window, click Open Release Directory on the Build OS menu.
    3. In the build window, type the following command:
    dir %_PROJECTROOT%/SysgenSettings.out
    This file confirms that you tried to build the operating system at least one time.
    4. In the same build window, type the following command:
    set sysgen>anchored.txt
    This file contains the set of anchored Catalog items in the operating system design. This file is located in the release directory.
    5. Compare the SysgenSettings.out file to the Anchored.txt file.
    6. Determine the set of Sysgen variables that are found in the Anchored.txt file that are not found in the SysgenSettings.out file. This set of Sysgen variables will be the set of Catalog items that you have to explicitly unanchor.
    7. On the View menu in Platform Builder 5.0, click Workspace.
    8. In the Workspace window, click the OSDesignView tab.
    9. For each Sysgen variable that you found in step 6, explicitly unanchor the Catalog item. To do this, follow these steps:

    a. On the OSDesignView tab, find the Catalog item.
        Note If you need help finding the Catalog item on the OSDesignView tab, follow these steps:
        1. On the View menu in Platform Builder 5.0, click Catalog.
        2. Right-click in the Catalog, and then click Find.
        3. In the Find what box, type the Sysgen variable name. For example, in the Find what box, type SYSGEN_LOCUSA.
        4. Click Find Next. The folder in which you find the Catalog item is the same folder that is used on the OSDesignView tab.

    b. Right-click the Catalog item, and then click Remove Item from User-specified Catalog Item(s).

    Note The Catalog item displays an unanchored symbol when the Catalog item is unanchored. An unanchored symbol is a green cylinder.

    10. On the Platform menu in Platform Builder 5.0, click SDK, and then click Configure SDK. The SDK Wizard starts.
    11. Click the CPU tab, and then click to select the check boxes for the CPU families that the SDK will support. Verify that you selected the operating system configuration that you already successfully built.
    12. On the Platform menu in Platform Builder 5.0, click SDK, and then click Build SDK.
    If the problem still occurs, verify that you successfully built all the operating system configurations that the SDK Wizard identified in the build log.

主要的步骤已经红色标出，大概意思就是找到出问题的 sysgen 变量，这些变量是存在于Anchored.txt文件中而在 SysgenSettings.out 文件中没有定义的。然后在PB的Catalog 中找到这些对应的选项并将其移除。