Message BT123 - Target host or target server & is not defined in an operation type

最新推荐文章于 2025-12-30 01:44:59 发布

转载最新推荐文章于 2025-12-30 01:44:59 发布 · 1.3k 阅读

SAP 专栏收录该内容

8 篇文章

订阅专栏

本文详细介绍了在SAP系统中遇到任务无法执行问题时，如何通过调整操作模式与正确配置主机系统来解决问题。包括创建、修改操作模式的方法，以及确保主机系统处于正确状态以支持任务执行的步骤。

转发自http://www.stechno.net/sap-messages.html?view=sapmessage&id=BT123

DOCUMENTATION
Diagnosis The host system that you specified for the execution of your job is notdefined in the operation mode that is active when your job is started.You have either specified that your job is to be started when a specificoperation mode becomes active, or that it is to be started on a specificdate and at a specific time. The job can only be executed, if the host is active as an unconfiguredinstance in the SAP system, if the background controller attempts tostart the job. An unconfigured instances must be started manually; it isnot started automatically as part of the operation mode. Procedure If possible, you should leave the host system field empty and save thejob again. The specification of a host system for the execution of a jobis only advisable if the job requires a resouce that is only availableon this host system. When you specify a host system, it also means thatthe automatic load balancing mechanism of the background controller hasno effect. If you need to specify a host system, you should use theComputing Center Management Systems to determine whenthe host that you require is active in the SAP system.

DOCUMENTATION

Diagnosis
The host system that you specified for the execution of your job is notdefined in the operation mode that is active when your job is started.You have either specified that your job is to be started when a specificoperation mode becomes active, or that it is to be started on a specificdate and at a specific time.
The job can only be executed, if the host is active as an unconfiguredinstance in the SAP system, if the background controller attempts tostart the job. An unconfigured instances must be started manually; it isnot started automatically as part of the operation mode.

Procedure
If possible, you should leave the host system field empty and save thejob again. The specification of a host system for the execution of a jobis only advisable if the job requires a resouce that is only availableon this host system. When you specify a host system, it also means thatthe automatic load balancing mechanism of the background controller hasno effect.
If you need to specify a host system, you should use theComputing Center Management Systems to determine whenthe host that you require is active in the SAP system.

Based on SAP ECC 6.0.

http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a5e76505211d189550000e829fbbd/content.htm

Defining Operation Modes

Use

You can define a new operation mode or change an existing operation mode.

Procedure

1. Choose CCMS →Configuration →Operation Modes/Instances, or call transaction RZ04.

The system displays a list of productive instances.

Note

If you have not yet defined any operation modes, the test operation mode DUMMY will be displayed. This operation mode is automatically configured so that system functions such as the Control Panel and the scheduling of background jobs can be used.

If there is already a DUMMY operation mode, this is updated every time that the server is started, and is therefore adjusted to different system relationships.

The operation mode DUMMY cannot be used for operation mode switching.

2. Create an operation mode (which can be automatically switched).

To do this, choose Operation Mode → Create.

3. Enter the data in the following fields:

Operation Mode	Enter a name for the operation mode, such as DAY_OPERATION, and a short description. You can enter any name for the operation mode, but it is advisable to choose a name that is meaningful and that makes the task of the operation mode clear.
Short Description	Enter a short description of the operation mode, such as “Day operation with 6 dialog processes”.
Monitoring Properties Variant	Enter the name of the monitoring properties variant in monitoring architecture assigned the operation mode. When the operation mode is started, the settings that the monitoring properties variant contains are automatically activated in the alert monitor.