ROS：Nvidia Jetson TK1开发平台

最新推荐文章于 2026-06-26 09:37:09 发布

转载最新推荐文章于 2026-06-26 09:37:09 发布 · 150 阅读

本内容遵循CC 4.0 BY-SA版权协议

原文链接：http://www.cnblogs.com/wishchin/p/9200014.html

本文介绍 Nvidia Jetson TK1 开发板的特性，包括其 ARM Cortex-A15 处理器、2GB DDR3L DRAM 和 16GB eMMC 存储等。阐述了 Jetson TK1 在移动机器人领域的应用潜力，并提供了 ROS（机器人操作系统）的安装指南。文章还探讨了 OpenCV 4 Tegra 的兼容性问题及其与 ROS 的集成，为开发者提供了解决方案。

原文链接：

http://wiki.ros.org/NvidiaJetsonTK1

1. Nvidia Jetson TK1

Jetson TK1 comes pre-installed with Linux4Tegra OS (basically Ubuntu 14.04 with pre-configured drivers). There is also some official support for running other distributions using the mainline kernel.

K1 开发板暂时是最适合移动机器人使用的开发板

Jetson Specs
	Nvidia Jetson TK1
Processor	2.32GHz ARM quad-core Cortex-A15
DRAM	2GB DDR3L 933MHz EMC x16 using 64-bit data width
Video out	HDMI
Flash	16GB fast eMMC 4.51
Mini PCIe	Addon wifi module, firewire IEEE 1394, etc.
Serial	a full-size DB9 serial port
Power	12V DC barrel power jack and a 4-pin PC IDE power connector

2. General Setup

Optionally: install the latest JetPack release (which will flash the latest L4T to your Jetson): link
Optionally: install the Grinch Kernel (pick a compatible version for your L4T release, which you can check on your Jetson using: cat /etc/nv_tegra_release, e.g. 21.3). It provides many useful drivers that NVidia failed to include with their stock kernel.
Install the nvidia cuda toolkit and opencv4tegra from https://developer.nvidia.com/linux-tegra-rel-21 (not necessary if you installed your Jetson through JetPack)
- older versions of the opencv4tegra we're packaged properly, and attempting to install them alongside the main opencv libraries would result in file conflicts. use the latest version.
If not using "Grinch Kernel" you can enable most Wifi mini-PCIe card and USB interfaces simply installing linux-firmware from PPA: sudo apt-get install linux-firmware

预备工作：

安装最新的 JetPack 包；................

3. Install ROS

With the Ubuntu flavor installed the standard installation instructions should work. indigo/Installation/UbuntuARM

4. Use opencv4tegra with ROS

With the latest opencv4tegra released by Nvidia, the compatibility problems with cv_bridge and image_geometry packages have been solved, so installing OpenCV ROS Packages from PPA does not force opencv4tegra to be uninstalled. There are yet a bit of incompatibility since cv_bridge and image_geometry search for OpenCV 2.4.8 in "/usr/lib/arm-linux-gnueabihf" and opencv4tegra is based on OpenCV 2.4.12 and is installed in "/usr/lib/". These diversities do not allow to compile external packages based on OpenCV. To solve the problem you can follow this guide.

Please note that opencv4tegra does not include "nonfree" module, so if your algorithms use SIFT or SURF and you want full CUDA support, the only solution is to compile OpenCV by yourself following this guide. Remember that compiling OpenCV by yourself you will lose Nvidia optimizations on the code running on the CPU that give 3-4 FPS more on heavy algorithms not running on CUDA.