将FL2440开发板修改为单独的linux系统

最新推荐文章于 2023-10-18 09:37:00 发布

转载最新推荐文章于 2023-10-18 09:37:00 发布 · 885 阅读

标签

#linux #wince #struct #c

收录于

本文介绍如何修改 TE24xx 开发板上的 NAND Flash 分区配置，包括 Linux 内核及 Bootloader 中的分区设置。通过调整分区大小与偏移量，实现了对文件系统的优化。

====================LINUX============================
LINUX分区表改为：(/arch/arm/mach-s3c2410/devs.c)

struct mtd_partition TE24xx_default_nand_part_b[]= { [0] = { .name = "Boot", .size = 0x00100000, .offset = 0 }, [1] = { .name = "MyApp", .size = 0x003c0000, .offset = 0x00140000, }, [2] = { .name = "Kernel", .size = 0x00300000, .offset = 0x00500000, }, [3] = { .name = "fs_yaffs", .size = 0x07800000, //原为60M现大小增大一倍 .offset = 0x00800000, }, /* [4] = { .name = "WINCE", .size = 0x03c00000, .offset = 0x04400000, //将wince屏蔽掉 }*/ }; /* struct s3c2410_nand_set nandset ={ nr_partitions: 4 , //原为5现改为4 partitions: TE24xx_default_nand_part_b, //partition_info 64M };

然后重新编译内核

-------------------------------------
boot源码中将nand.c中改为如下所示
static struct Partition NandPart[] = { {0, 0x00100000, "boot"}, //128K {0x00100000, 0x00040000, "bootParam"},//two blocks {0x00140000, 0x003c0000, "MyApp"}, //4M512K {0x00500000, 0x00300000, "kernel"}, //3M128K //{0x00800000, 0x01400000, "fs_cramfs"}, //20M {0x00800000, 0x07800000, "fs_yaffs"}, //40M // {0x00500000, 0x03c00000, "wince"}, //60M {0, 0 , 0} };

然后重新编译boot即可