本文提供了在Ubuntu中启动到恢复模式（Safe Mode）的详细步骤，包括如何在启动时进入此模式，以及如何进行关键的系统修复操作，如移除lightdm、重启网络服务和系统升级。
.
- Boot in recovery mode with read/write access
- Go to shell as root
- sudo apt-get remove lightdm (now gdm3 is default)
- Start the network: sudo service network-manager restart
- sudo apt upgrade
- reboot
How to Boot to Recovery Mode (Safe Mode) in Ubuntu
As you’re booting your computer, wait for the manufacturer logo to flash from the BIOS. If your computer boots too quickly, you’re going to need to do this immediately after powering it on. Quickly press either the Shift or Escape key. On newer computers it’s probably Escape. The timing has to be near perfect on some computers, so you may have to press it repeatedly.
https://www.maketecheasier.com/boot-recovery-mode-ubuntu/
https://askubuntu.com/questions/990279/ubuntu-hangs-on-boot-after-blackout-detect-the-available-gpus
扫一扫
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
