命令行修改注册表--设置NTP

最新推荐文章于 2026-05-22 07:19:59 发布

原创最新推荐文章于 2026-05-22 07:19:59 发布 · 2.5k 阅读

1 ·

本内容遵循CC 4.0 BY-SA版权协议

标签

#注册表 #NTP

本文档提供了一种使用命令行修改注册表来设置计算机为NTP客户端和服务器的方法。首先，通过注册表设置本地NTP，然后配置NtpServer和NtpClient的参数，包括启用NtpClient，设置SpecialPollTimeRemaining和SpecialPollInterval。最后，通过SC命令调整w32time服务的启动类型，并重启服务以应用更改。

set as both server and client

@echo off
echo autor OAK

echo --------------------------------

::set as both server and client
echo --
:: first local ntp
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters /v LocalNTP /t REG_DWORD /d 0x00000001 /f
echo ----
::1- set netserver = xxx.xxx.xxx.xxx,0x1
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters /v NtpServer /t REG_SZ /d xxx.xxx.xxx.xxx,0x1 /f

echo -------
:: 2-set ntpclient enable =1
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient /v Enabled /t REG_DWORD /d 0x00000001 /f
echo ----------
::3-set SpecialPollTimeRemaining = xxx.xxx.xxx.xxx,7e0efb6
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient /v SpecialPollTimeRemaining /t REG_MULTI_SZ /d "xxx.xxx.xxx.xxx,7e0efb6" /f
echo ---------------
::4-set SpecialPollInterval = 600 ,5mins
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient /v SpecialPollInterval /t REG_DWORD /d 0x12c /f
::5-set server enabled =1
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer /v Enabled /t REG_DWORD /d 0x00000001 /f
SC CONFIG w32time START= auto

::@echo off

net stop w32time
net start w32time

pause

set as client

@echo off
echo autor OAK

echo --------------------------------

echo --
::1- set netserver = 192.168.xxx.xxx,0x1
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters /v NtpServer /t REG_SZ /d 192.168.xxx.xxx,0x1 /f

SC CONFIG w32time START= auto

::@echo off

net stop w32time
net start w32time

pause