KVM克隆新虚拟机出现inet6地址冲突的处理

最新推荐文章于 2026-06-20 14:10:47 发布

原创最新推荐文章于 2026-06-20 14:10:47 发布 · 1.8k 阅读

2 ·

本内容遵循CC 4.0 BY-SA版权协议

收录于

KVM

在使用virt-clone克隆RHEL或CentOS8虚拟机时，启动新虚拟机会遇到IPv6地址冲突的问题。分析发现，这是由于克隆后的机器与原模板拥有相同的IPv6地址。通过修改模板OS的/etc/machine-id文件内容为444，可以避免克隆后出现的地址冲突。

开发板推荐：天空星STM32F407VET6开发板

超高性价比 STM32主控 | 超高主频 | 一板兼容百芯 | 比赛神器 | 沉金彩色丝印

点击查看

问题描述

使用virt-clone克隆新虚拟机，启动之后出现IPV6地址冲突的报错，ifconfig命令输出两条inet6物理地址。目前因为用不到IPV6所以没有什么影响。

# virt-clone -o centos8 --auto-clone -n master1

[root@localhost ~]# ifup enp1s0
[  527.328326] IPv6: enp1s0: IPv6 duplicate address fe80::5b9e:ffb9:f80:12d2 used by 52:54:00:26:ad:6e detected!
[  527.544284] IPv6: enp1s0: IPv6 duplicate address fe80::5b9e:ffb9:f80:12d2 used by 52:54:00:26:ad:6e detected!
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/1)
[root@localhost ~]# ifconfig
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.50.34  netmask 255.255.255.0  broadcast 192.168.50.255
        inet6 fe80::5b9e:ffb9:f80:12d2  prefixlen 64  scopeid 0x20<link>
        inet6 fe80::fe9d:7b0f:418b:c3e8  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:bd:d1:e2  txqueuelen 1000  (Ethernet)
        RX packets 624  bytes 142290 (138.9 KiB)
        RX errors 0  dropped 279  overruns 0  frame 0
        TX packets 49  bytes 5092 (4.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0