STM32G031 HAL库adc+DMA采集电压

硬件原理图

程序：

int main(void)
{
    //Flash_EnableReadProtection();//RDP设置 使能读保护
    HAL_Init();
    SystemClock_Config();
    MX_GPIO_Init();
    MX_DMA_Init();
    MX_I2C1_Init();
    MX_ADC1_Init();
    MX_TIM2_Init();
    MX_NVIC_Init();
    HAL_TIM_Base_Start_IT(&htim2);
    HAL_ADC_Start_DMA(&hadc1,(uint32_t *)&adcbuf,2);
    while(1)
    {


    }
}

void MX_DMA_Init(void) 
{

  /* DMA controller clock enable */
  __HAL_RCC_DMA1_CLK_ENABLE();

  /* DMA interrupt init */
  /* DMA1_Channel1_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 1, 0);
  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);

}

uint16_t adcbuf[2];//0,电池电压, 1,温度ADC

ADC_HandleTypeDef hadc1;
DMA_HandleTypeDef hdma_adc1;

void MX_ADC1_Init