make module失败的原因cc1: error: unrecognized command line option "-m64"

最新推荐文章于 2024-05-22 13:05:12 发布

原创最新推荐文章于 2024-05-22 13:05:12 发布 · 3.1w 阅读

2 ·

本内容遵循CC 4.0 BY-SA版权协议

标签

#command #module #newline #file

收录于

本文记录了一次使用make命令编译Linux 2.6.30内核时遇到的错误过程及解决方案。最初由于编译选项不被识别导致编译失败，在指定了正确的架构参数ARCH=arm后，成功解决了编译问题并完成了内核模块的编译。

[root@localhost 123]# make
make -C /work/cs/YL-9G45/linux-2.6.30 M=/work/rootfs/123 modules
make[1]: Entering directory `/work/cs/YL-9G45/linux-2.6.30'
CC [M] /work/rootfs/123/test.o
cc1: error: unrecognized command line option "-m64"
cc1: error: unrecognized command line option "-mno-red-zone"
cc1: error: unrecognized command line option "-mcmodel=kernel"
cc1: error: unrecognized command line option "-maccumulate-outgoing-args"
make[2]: *** [/work/rootfs/123/test.o] 错误 1
make[1]: *** [_module_/work/rootfs/123] 错误 2

make[1]: Leaving directory `/work/cs/YL-9G45/linux-2.6.30'

缺少编译的对象,需要加入ARCH=arm

[root@localhost 123]# make ARCH=arm
make -C /work/cs/YL-9G45/linux-2.6.30 M=/work/rootfs/123 modules
make[1]: Entering directory `/work/cs/YL-9G45/linux-2.6.30'
CC [M] /work/rootfs/123/test.o
/work/rootfs/123/test.c:45:7: warning: no newline at end of file
Building modules, stage 2.
MODPOST 1 modules
CC /work/rootfs/123/test.mod.o
LD [M] /work/rootfs/123/test.ko
make[1]: Leaving directory `/work/cs/YL-9G45/linux-2.6.30'