This file was generated by an older version of protoc

g++ -o app ./blob_demo.cpp -I ./include/ -D CPU_ONLY -I ./.build_release/src -L .ildb/ -lcaffe In file included from ./include/caffe/blob.hpp:9:0, from ./blob_demo.cpp :3: ./.build_release/src/caffe/proto/caffe.pb.h:17:2: error: #error Thi

我们的项目中会引用到各种sdk，项目代码和sdk中都有可能会使用protobuf。当protobuf版本不一致时，编译就会报错。有两种可能的报错信息This file was generated by a newer version of protoc which is incompatible with your Protocol Buffer headers. Please update your headers.This file was generated by an older version

在编译与gazebo相关的包时常常会出现protoc版本冲突问题，从而导致编译失败，如下图： In file included from /usr/include/gazebo7/gazebo/msgs/MessageTypes.hh:91:0, from /usr/include/gazebo7/gazebo/msgs/msgs.hh:24, ...

1.This file was generated by an older version of protoc which is python环境和Anaconda python环境可能存在冲突。 使用conda install libprotobuf-dev,这将导致与caffe ’sudo apt-get install libprotobuf-dev ’之间的冲突。 apt-get 和...

错误： /usr/include/gazebo-7/gazebo/msgs/altimeter.pb.h:17:2: error: #error This file was generated by an older version of protoc which is #error This file was generated by an older version of protoc whi...

编译OpenCV时在OpenCV.sln生成解决方案时提示#error This file was generated by an older version of protoc which is… 这是由于在这之前安装过了其他版本的protobuf，比如Anaconda会安装libprotobuf-dev，这时就会产生冲突，可以卸载libprotobuf-dev，比如Anaconda 可以使用...

- 解决opencv编译中出现的#error: This file was generated by an older version of protoc which is (编C1189译源文件）问题 - 替换anaconda3中libprotoc3版本问题

使用which protoc查看安装的路径，cartographer的搜索protoc的路径为/ usr/bin/protoc ，使用以下命令建立软链接。最近安装cartographer时遇到了一个很烦人的报错，关于protobuf版本的问题，后来查找了好多资料后终于成功解决。最后catkin_make_isolated编译cartographer，成功编译。

行不通的方法，浪费时间根据<<深度学习21天实战Caffe>>书中P102页，编写程序 blob_demo.cpp， 并把它放置在caffe目录下，编译时出现如下提示：sf@ubuntu:~/caffe$ g++ -o app ./blob_demo.cpp -I ./include/ -D CPU_ONLY -I ./.build_release/src -L .ildb...

发生这个问题的原因是: 1.当前编译的caffe/include/caffe/proto路径下的caffe.pb.h文件（该文件可以用以下指令生成:protoc --cpp_out=. caffe.proto,caffe.proto文件在caffe/src/caffe/proto路径下。假设此时的protoc版本是A）； 2.编译时默认环境protoc版本或者Makefile.config中指定的protoc版本为B； 如果A与B版本不一致时，就会产生上述冲突。 解决方法可参考下边博客。 我造成此

问题所在 我们可以发现这个错误跟protobuf的版本有关，因此我们可以执行script/diagnose_protobuf.py 我们可以看到，pip install protobuf 和 brew install protobuf 的版本不一样导致的 解决办法 更新brew的版本 brew install protobuf@3.4 直接指定版本3.4，根据你的需求作相应的改变 bre...

之前在编译caffe时，protoc版本是系统默认的2.6.1版本。 后来在使用OPEN AI的框架tengine时，环境要求protoc版本为3.0.0 当时我直接把2.6.1版本的删除，新装了3.0.0.，再跑caffe项目时，caffe.pb.h报错This file was generated by an older version of protoc 只需要到caffe的根目录里重新编译...

src/caffe/proto/caffe.pb.h:17:2: error: #error This file was generated by an older version of protoc which is #error This file was generated by an older version of protoc which is /src/caffe/proto...

编译grpc route_guide example的时候遇到#error This file was generated by an old version of protoc 原因： 系统中有两个protoc版本（之前下载了protobuf的git，当时编译安装了一遍。然后下grpc的git，在编译的时候按照教程使用“cmake -DgRPC_INSTALL=ON …”之后make install又安装了一遍。） 解决： 把route_guide example 中的Makefile的protoc版本改

一颗行走的大白菜 这个问题浪费了2个小时，在此总结出来，希望能帮到你！！！ 问题描述 This file was generated by an older version of protoc which is error This file was generated by an older version of protoc which is ^ .build_release/s...

在使用protobuf编译后的.pb.h和.pb.cc文件时，报错#error This file was generated by an older version of protoc which is #error incompatible with your Protocol Buffer headers. Please #error regenerate this file with a...

问题：cmake中，勾选build_opencv_world则会在vs编译中发生以下错误：This file was generated by a older version of protoc which is incompatible with your Protocol Buffer headers. cannot open input file '..\..\lib\Release\opencv_world440.lib'。 cmake不勾选build_opencv_world则可以在vs里编译