Ubuntu网卡速率查看

最新推荐文章于 2025-08-20 09:39:29 发布

原创最新推荐文章于 2025-08-20 09:39:29 发布 · 5.5k 阅读

1 ·

本内容遵循CC 4.0 BY-SA版权协议

收录于

环境配置

本文介绍了通过命令行检查网络速度的两种方法：一是使用`cat`命令查看`sys/class/net/eno1/speed`获取速度信息；二是利用`ethtool`工具详细展示网络接口的设置和状态，包括速度、双工模式、连接类型等。

方法1 ：
~$ cat /sys/class/net/eno1/speed
1000

方法二：用ethtool 工具
sw:~$ ethtool eno1
Settings for eno1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s #网速配置
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes

标签

#ubuntu #服务器 #linux