文件存储：Tape Backup 磁带备份

• The tape functions enable backup applications to read from and write to a tape, initialize a tape, and retrieve tape or tape drive information.磁带函数使备份应用程序能够对磁带进行读写、初始化磁带以及检索磁带或磁带驱动器信息。

About Tape Backup

Using Tape Backup

Tape Backup Reference

• The following elements are used with tape backup. 以下元素用于磁带备份

Tape Backup Functions

• The following functions are used with tape backup.以下功能用于磁带备份。

BackupRead

• Reads data associated with a specified file or directory into a buffer. 将与指定文件或目录关联的数据读入缓冲区。

BackupSeek

• Seeks forward in a data stream. 在数据流中向前查找

BackupWrite

• Writes a stream of data from a buffer to a specified file or directory. 将数据流从缓冲区写入指定的文件或目录

CreateTapePartition

• Reformats a tape. 重新格式化磁带。

EraseTape

• Erases all or part of a tape.擦除磁带的全部或部分。

GetTapeParameters

• Retrieves information that describes the tape or the tape drive. 检索描述磁带或磁带驱动器的信息

GetTapePosition

• Retrieves the current address of the tape. 检索磁带的当前地址

GetTapeStatus

• Determines whether the tape device is ready to process tape commands.确定磁带设备是否准备好处理磁带命令

PrepareTape

• Prepares the tape to be accessed or removed. 指定磁带的块大小或配置磁带设备

SetTapeParameters

• Specifies the block size of a tape or configures the tape device. 指定磁带的块大小或配置磁带设备

SetTapePosition

• Sets the tape position on the specified device. 设置指定设备上的磁带位置

WriteTapemark

• Writes a specified number of filemarks, setmarks, short filemarks, or long filemarks to a tape device.将指定数量的文件标记、设置标记、短文件标记或长文件标记写入磁带设备

Tape Backup Structures

• The following structures are used with tape backup.以下结构用于磁带备份

TAPE_ERASE

TAPE_GET_DRIVE_PARAMETERS

TAPE_GET_MEDIA_PARAMETERS

TAPE_GET_POSITION

TAPE_PREPARE

TAPE_SET_DRIVE_PARAMETERS

TAPE_SET_MEDIA_PARAMETERS

TAPE_SET_POSITION

TAPE_WRITE_MARKS

WIN32_STREAM_ID