Create pins_arduino.h

Author: mazgch

variants/nora_w10/pins_arduino.h

@@ -0,0 +1,93 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+// The pin assignments in this file are based on u-blox EVK-NORA-W1, a Arduino compatible board.
+// For your own module design you can freely chose the pins available on the module module pins
+
+static const uint8_t TX   = 43;
+static const uint8_t RX   = 44;
+static const uint8_t RTS  = 45;
+static const uint8_t CTS  =  6;
+static const uint8_t DTR  =  1; 
+static const uint8_t DSR  =  7; 
+
+static const uint8_t SW1  = 46;
+static const uint8_t SW2  =  0; // BOOT
+static const uint8_t SW3  = 47; 
+static const uint8_t SW4  = 48; 
+
+static const uint8_t LED_RED 	= 5;
+static const uint8_t LED_GREEN 	= 2;
+static const uint8_t LED_BLUE	= 8;
+#define BUILTIN_LED  LED_BLUE 	// backward compatibility
+#define LED_BUILTIN  LED_BLUE
+
+static const uint8_t SS   = 10;
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 13;
+static const uint8_t SCK  = 12;
+
+static const uint8_t A0   = 11;
+static const uint8_t A1   = 12;
+static const uint8_t A2   = 13;
+static const uint8_t A3   =  5;
+static const uint8_t A4   = 15;
+static const uint8_t A5   = 16;
+
+static const uint8_t D0   = 44; // RX0
+static const uint8_t D1   = 43; // TX0
+static const uint8_t D2   = 46; 
+static const uint8_t D3   =  4;
+static const uint8_t D4   =  3;
+static const uint8_t D5   =  2;
+static const uint8_t D6   = 14;
+static const uint8_t D7   = 10;
+
+static const uint8_t D8   = 33;
+static const uint8_t D9   = 38;	
+static const uint8_t D10  = 34; // SS
+static const uint8_t D11  = 35; // MOSI
+static const uint8_t D12  = 37; // MISO
+static const uint8_t D13  = 36; // SCK
+static const uint8_t SDA1 = 21;	
+static const uint8_t SCL1 =  0;
+
+static const uint8_t D14  = 45; // RTS
+static const uint8_t D15  =  6; // CTS
+static const uint8_t D16  =  1;	// DTR 
+static const uint8_t D17  =  7;	// DSR
+static const uint8_t D18  = 47;
+static const uint8_t D19  = 48;
+static const uint8_t SDA  = 18;
+static const uint8_t SCL  = 17;
+
+static const uint8_t T1   =  1;
+static const uint8_t T2   =  2;
+static const uint8_t T3   =  3;
+static const uint8_t T4   =  4;
+static const uint8_t T5   =  5;
+static const uint8_t T6   =  6;
+static const uint8_t T7   =  7;
+static const uint8_t T8   =  8;
+static const uint8_t T9   =  9;
+static const uint8_t T10  = 10;
+static const uint8_t T11  = 11;
+static const uint8_t T12  = 12;
+static const uint8_t T13  = 13;
+static const uint8_t T14  = 14;
+
+#endif /* Pins_Arduino_h */