Sitemap
code3100

CoDe 3100 Digital Collaboration Studio

Material Performance

3 min readApr 12, 2017

--

As discussed in the previous weeks among the Digital Fabrication and Making group as well as the tutor, we wanted the pavilion to be made up of a primary and secondary structure with a skin made up of elastic fabric. A part of the role of the group is to test the different materials to see which material has the best performance for the design of the pavilion.

Get Sarah Xaviera’s stories in your inbox

Join Medium for free to get updates from this writer.

Due to the many agreements with using latex as the skin for the pavilion, we decided to also test on its properties. For the test, both Edward and I consider testing latex and nylon spandex as both of them has the better elasticity properties compared to the other materials that we have tested (polyester, cotton lycra, cotton). For the series of experiments we are going to do, we are planning to test on how the materials react when stretched.

First Experiment

For our first series of experiments, Edward and I used nylon spandex connected with wire. For these series of experiments, we experimented on attaching different shaped wire to the stretched fabric. For all of the experiments, we stretched the fabric to its maximum by clamping all the four sides and then attaching the wire using glue gun.

Press enter or click to view image in full size
Circular shape wire

Our first prototype was gluing a circular shaped wire to a stretched nylon spandex. The result of the experiment shows that the wire bent towards the center and the once circular shaped fabric became elongated to its sides. From this prototype, the problem that we identified is the fact that we took out the clamps at different times causing more force acting on only one side during the process.

Press enter or click to view image in full size
Second fabric prototype

For the second prototype, we used the same process as the first one but this time we used a different shape and we were able to release all four sides of the fabric from the clamps at the same time. The result was nice since there is no warping unlike the first material.

Second Experiment

For our second series of experiments, Edward and I started experimenting with latex. For the first two prototypes, we stretched the latex to its maximum and glue wire onto them. The result shows it warping a lot.

Press enter or click to view image in full size
Results of latex warping

The next series of experiments that Edward, Kingsley and I did was to stretch the latex but at a measured distance.

Press enter or click to view image in full size
Biaxial Testing

From the experiment, what we observe is that as soon as we started stretching each side of the fabric 60mm or more, the latex starts tearing and it warps so much. Another thing we observe is that using glue gun to attach the wire is better than when we use other types of glue because when we use other type of glue to stick the wire to the latex the latex was detached just like the picture on the most right hand corner of the diagram. Another thing we notice is that sometimes when we use the glue gun on the latex, there are times when the latex ripped by itself maybe due to the heat.

What to do next?

For further material testing, we decided to start making our own biaxial testing ‘machine’ as well as start analyzing the materials digitally using strand7 to decide which material we are going to use.

--

--