<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0" xmlns:cc="http://cyber.law.harvard.edu/rss/creativeCommonsRssModule.html">
    <channel>
        <title><![CDATA[Stories by Hector Konomi on Medium]]></title>
        <description><![CDATA[Stories by Hector Konomi on Medium]]></description>
        <link>https://medium.com/@hectorkonomi1?source=rss-4330a6da72ca------2</link>
        <image>
            <url>https://cdn-images-1.medium.com/fit/c/150/150/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg</url>
            <title>Stories by Hector Konomi on Medium</title>
            <link>https://medium.com/@hectorkonomi1?source=rss-4330a6da72ca------2</link>
        </image>
        <generator>Medium</generator>
        <lastBuildDate>Sun, 22 Nov 2026 16:57:41 GMT</lastBuildDate>
        <atom:link href="https://medium.com/@hectorkonomi1/feed" rel="self" type="application/rss+xml"/>
        <webMaster><![CDATA[yourfriends@medium.com]]></webMaster>
        <atom:link href="http://medium.superfeedr.com/" rel="hub"/>
        <item>
            <title><![CDATA[Craft Disappears Slowly: What My Tokoname Apprenticeship Taught Me as a Toronto Potter]]></title>
            <link>https://hectorkonomi1.medium.com/craft-disappears-slowly-what-my-tokoname-apprenticeship-taught-me-as-a-toronto-potter-9e8a36f5b879?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/9e8a36f5b879</guid>
            <category><![CDATA[mental-health]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[pottery]]></category>
            <category><![CDATA[toronto]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Sat, 21 Nov 2026 05:10:57 GMT</pubDate>
            <atom:updated>2026-11-21T05:10:57.117Z</atom:updated>
            <content:encoded><![CDATA[<h3>Failing at the wheel, a teacher’s kindness, and why simplicity is the hardest thing to learn</h3><p><strong>The short version:</strong> an apprenticeship doesn’t just teach you how to make a pot. It teaches you how to fail without giving up, how to stop thinking and feel the clay, and how to see that simple work is often the best work. Those things are hard to put in a book or a video. That’s exactly why I worry about what happens when fewer people learn them by hand.</p><p>Last December I put out a press release that said this more formally: <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html"><strong>“Hector Konomi Calls for Global Support to Preserve Traditional Craft Heritage”</strong></a>. One line from it is the reason I’m writing this:</p><blockquote><em>“Craft doesn’t disappear overnight. It disappears slowly, when fewer people know how to do it and fewer people understand why it matters.”<br> — from </em><a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html"><em>my ACCESS Newswire release, December 2025</em></a></blockquote><p>A press release can say that. It can’t show you what is actually being lost. So here are three things I learned in Tokoname, one of Japan’s Six Ancient Kilns, that I still carry into my Toronto studio every day.</p><h3>What does an apprenticeship actually teach you first?</h3><p>Humility. When I started, I could not make a proper pot on the wheel. I tried, and failed, and tried again, day after day. Walls collapsed, forms wobbled off centre, and pieces I was proud of for five minutes went straight back into the clay bin. It was a very humbling time.</p><p>What pulled me through in those first months wasn’t talent. It was the kindness of my teacher. He never made me feel stupid for failing. He just let me keep going, and made it clear that failing was simply part of the work. I think about that often. A craft survives not only because the techniques are written down, but because someone is patient enough to stand next to a beginner while they fail.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*HFdonDUiY6SNBrj0Q0ALxw.jpeg" /></figure><p>As I said in the release, “In Tokoname, you don’t just learn technique. You learn discipline, patience, and respect for the people who kept the craft alive long before you.”</p><h3>Why did my teacher tell me not to overthink it?</h3><p>My teacher had one sentence he repeated so often that I can still hear it:</p><blockquote><em>“Do not overthink it. Let your fingers feel the clay.”</em></blockquote><p>As a beginner, I was trying to control everything with my head: the angle of my hands, the speed of the wheel, the thickness I wanted. The clay always knew. Once I started listening through my fingers instead of my thoughts, the pots began to stand up. This is the kind of knowledge that only passes from hand to hand. You can read the sentence a hundred times. You only understand it at the wheel.</p><h3>What did the Tokoname masters teach me about simplicity?</h3><p>I never had a lecture on simplicity. I learned it by watching the Tokoname masters work. Their teapots had nothing extra: no decoration added to impress, no complicated shapes. And yet you could see the excellence in every line, because there was nothing hiding it.</p><p>Simplicity is best because it lets real excellence shine through. It’s also the hardest thing to achieve. Anyone can add more. Knowing what to leave out takes years.</p><h3>Why does this matter now?</h3><p>Each of those lessons depends on people: a patient teacher, a beginner willing to fail, masters whose work you can watch up close. Take those away and the craft doesn’t vanish all at once. It just thins out, one unfinished apprenticeship at a time. That’s what I meant in the release, and why I said “a teapot is not just a tool. It’s a record of hands, land, and decisions.”</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*32riW_Rh9_6cmyNp5Hu9iA.jpeg" /></figure><h3>What am I doing about it?</h3><p>For now, my part is simple: I show the work openly. I post new pieces from the Toronto studio, and the honest failures too, on <a href="https://www.instagram.com/hectorkonomi2/"><strong>Instagram @hectorkonomi2</strong></a>. I film my teapots for <a href="https://www.youtube.com/@HectorKonomi">YouTube</a>. I write about what I learn here and in my newsletter. And my research on clay, firing and Japanese teaware is registered under my <a href="https://orcid.org/0009-0007-8656-5000"><strong>ORCID iD 0009–0007–8656–5000</strong></a>, so the knowledge has a home outside my own studio. If any of this helps one more person sit down at a wheel and keep going after the tenth failed pot, it’s worth it.</p><h3>Read the full release and follow my work</h3><p>You can read the full press release here: <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html"><strong>Hector Konomi Calls for Global Support to Preserve Traditional Craft Heritage</strong></a>. For the longer story of my path from Tokyo to Tokoname to Toronto, there’s also <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">my CEOWORLD Magazine profile</a>.</p><ul><li><strong>Instagram:</strong> <a href="https://www.instagram.com/hectorkonomi2/">@hectorkonomi2</a>, new work from the studio first</li><li><strong>LinkedIn:</strong> <a href="https://www.linkedin.com/in/hector-konomi-toronto/">Hector Konomi, Toronto</a>, where I share longer thoughts on craft</li><li><strong>ORCID:</strong> <a href="https://orcid.org/0009-0007-8656-5000">0009–0007–8656–5000</a>, my research record</li></ul><p>My teapots are at <a href="https://www.hectorkonomitoronto.com/">hectorkonomitoronto.com</a> and in my <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy shop</a>, and more of my writing is at <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a> and on <a href="https://hectorkonomi.substack.com/">Substack</a>.</p><p><em>— Hector Konomi, Toronto, November 2026</em></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=9e8a36f5b879" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[The Fire Leaves Clues: What My Kiln Failures Taught Me as a Toronto Potter]]></title>
            <link>https://hectorkonomi1.medium.com/the-fire-leaves-clues-what-my-kiln-failures-taught-me-as-a-toronto-potter-6c39d7340205?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/6c39d7340205</guid>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[mental-health]]></category>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Fri, 06 Nov 2026 01:39:05 GMT</pubDate>
            <atom:updated>2026-11-06T01:39:05.447Z</atom:updated>
            <content:encoded><![CDATA[<h3>Cracked pots, spotty colour and walls thrown too thin: three mistakes that shaped how I make Tokoname teapots</h3><p><strong>The short version:</strong> almost every failure from my early years came down to three things. I let the wood kiln climb too hot, too fast. I didn’t control the oxygen in the firing well enough. And I threw walls that were too thin. Each one left its mark on the pots, and each one taught me something I still use every day in my Toronto studio.</p><p>Last December, <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/"><strong>CEOWORLD Magazine published a profile of my work, “Hector Konomi and the Quiet Power of Tokoname Craft”</strong></a>, written by Sophie Ireland, PhD. I said a few things in that interview that I keep coming back to. One of them was simply this:</p><blockquote><em>“The fire leaves clues.”<br> — Hector Konomi, in </em><a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/"><em>CEOWORLD Magazine</em></a></blockquote><p>I meant it literally. When you open a kiln, the pots tell you what happened in there. The problem, when you’re starting out, is that you can’t read the clues yet. This is my attempt to write down what a few of mine meant.</p><h3>Why did my pots crack in the wood kiln?</h3><p>When I was just getting started, controlling the temperature of a wood firing was a real challenge. A wood kiln isn’t a dial. You feed it, it breathes, and it responds in its own time. There were firings where the heat climbed too fast, and we opened the kiln to find cracked pots. In a couple of firings it got so hot that two pots sitting next to each other had melted together.</p><p>That is a hard thing to see after days of work. But the lesson was clear: clay needs time to move through heat, especially early in a firing and again as it cools. If you rush it, the pot pays for it. Now I keep the climb slow and steady, I watch the cones rather than my own impatience, and I leave more space between pieces than I used to.</p><h3>Why did some pots come out spotty instead of one even colour?</h3><p>The second problem was oxygen. Getting the atmosphere in the kiln right was hard for me for a long time. When the air wasn’t balanced through the firing, the pots came out spotty: patches and blotches instead of the uniform, pleasing hue I was after.</p><p>With unglazed Tokoname-style clay there’s nowhere to hide. There’s no glaze to cover the surface, so the colour of the clay <em>is</em> the finish. That’s exactly why the oxygen matters so much. It decides whether an iron-rich clay comes out a warm, even red-brown or a dark, quiet near-black, and whether the colour is the same all the way around the pot.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*6Es-qav6pPIWjd8ANzoYkA.jpeg" /><figcaption>An oxidation-fired teapot from my Toronto studio. This even, warm colour is what I’m aiming for, and it’s what I didn’t get when the oxygen was off.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*fAO8aHuURijv15EuT0HPrA.jpeg" /><figcaption>The same idea in reduction: a dark, matte surface that’s consistent from spout to handle.</figcaption></figure><h3>Why are thin walls a problem for a teapot?</h3><p>This one took me longer to understand, because a thin wall can feel like an achievement at the wheel. It looks skilful. But walls that are too thin make a pot fragile, and a teapot is something you handle every day, filled with hot water.</p><p>There’s a second cost that matters to me even more. Thin walls throw off the harmony of the whole piece. The weight in the hand, the line of the body, the balance between lid, spout and handle all depend on the walls being right for that pot. When they aren’t, the teapot loses the quiet balance that wabi-sabi is about. It stops feeling natural. In the CEOWORLD profile I put it this way: “A good pot should feel inevitable.” A pot with walls that are too thin never does.</p><h3>What do I do differently now?</h3><ul><li><strong>I fire slower than I want to.</strong> Patience in the climb and the cool-down saves more pots than anything else.</li><li><strong>I treat oxygen as part of the design.</strong> The colour of an unglazed pot is decided in the kiln, so I plan the atmosphere the way I plan the form.</li><li><strong>I throw for harmony, not for thinness.</strong> The right wall is the one that makes the whole pot feel balanced in the hand.</li><li><strong>I read every firing.</strong> The cracked pots and the spotty ones were never wasted. They were the clues.</li></ul><p>Another line from that interview sums it up: “Ceramics is not magic.” It’s attention, repetition, and being honest about what went wrong. As I also told CEOWORLD, “You learn fast that clay doesn’t lie.”</p><h3>Read the full CEOWORLD profile</h3><p>If you’d like the longer story, from growing up near the Bohai Sea to my apprenticeship in Tokoname and starting over in Toronto, the full profile is here: <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/"><strong>Hector Konomi and the Quiet Power of Tokoname Craft, CEOWORLD Magazine</strong></a>.</p><p>You can also see how a finished piece turns out in my short video of a <a href="https://youtu.be/Q6ug9RilFjw">carved Tokoname teapot fired in oxidation</a>, and more in my <a href="https://www.youtube.com/playlist?list=PLRsPYZfJnjGU">handmade Japanese teapots playlist</a> on <a href="https://www.youtube.com/@HectorKonomi">YouTube</a>. I post new pieces, and the occasional honest kiln result, on <a href="https://www.instagram.com/hectorkonomi2/"><strong>Instagram @hectorkonomi2</strong></a>.</p><p>My current teapots are at <a href="https://www.hectorkonomitoronto.com/">hectorkonomitoronto.com</a> and in my <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy shop</a>. For more of my writing, see <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a> and <a href="https://hectorkonomi.substack.com/">my Substack, The Clay Letter</a>. My research on clay and firing is registered under my ORCID iD, <a href="https://orcid.org/0009-0007-8656-5000"><strong>0009–0007–8656–5000</strong></a>, and you can reach me on <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a>.</p><p><em>— Hector Konomi, Toronto, November 2026</em></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=6c39d7340205" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[New Arrival: Akitsu Mumyoi and Nosaka Rough Clay Teapots]]></title>
            <link>https://hectorkonomi1.medium.com/new-arrival-akitsu-mumyoi-and-nosaka-rough-clay-teapots-dde48c88e40d?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/dde48c88e40d</guid>
            <category><![CDATA[pottery]]></category>
            <category><![CDATA[mental-health]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[toronto]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Thu, 22 Oct 2026 17:17:40 GMT</pubDate>
            <atom:updated>2026-10-22T17:17:40.874Z</atom:updated>
            <content:encoded><![CDATA[<h3>Two rare Japanese unglazed clays — and why the firing method changes everything about your cup</h3><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*wrMDDQhSXZ4e7e5_TYlXvg.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired teapot — hand-textured surface, warm iron-red body.</figcaption></figure><h3>The Moment a New Clay Arrives</h3><p>There is a particular kind of anticipation that comes with opening a delivery of unfired clay. As a Tokoname-trained potter now working from my <a href="https://www.hectorkonomitoronto.com/">Toronto studio</a>, I have handled dozens of Japanese clay types over the years — but the morning I unwrapped the first batch of Akitsu Mumyoi and Nosaka Rough Clay, something was different. The colour alone told the story: a deep ochre that shifted almost orange in the studio light, holding the mineral memory of two very different corners of Japan.</p><p>This article is my attempt to share what I have learned — both through research and through working with these materials firsthand in my Toronto workshop. Whether you are a tea practitioner looking for the right vessel, a collector drawn to unglazed Japanese teaware, or simply curious about how clay changes flavour, I hope these notes are useful. You can follow this work on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a> and read more about my background on <a href="https://www.hectorkonomi.com/about/">my website</a>.</p><blockquote><strong><em>Why clay matters for tea:</em></strong><em> Unglazed stoneware is not passive. Its porous mineral structure absorbs heat, modulates water chemistry, and — over time — builds a thin layer of tea oils that literally becomes part of the vessel. Choosing the right clay for your tea style is not aesthetic preference alone; it is a decision that shapes flavour.</em></blockquote><h3>Akitsu Mumyoi Clay: Iron, Fire, and Complexity</h3><p>Mumyoi (無名異) is the iron-rich red clay of Sado Island, historically drawn from the tunnels of the Sado gold mine. “Akitsu Mumyoi” is the Mumyoi clay associated with the Sado potter Watanabe Tozo — and as experienced collectors point out, even clays sharing the Mumyoi name differ from potter to potter, because each traditionally gathered and processed clay from their own sources. Akitsu Mumyoi is prized for its high iron content, which transforms during firing into a characteristic terracotta-to-rust palette when oxidised, or a dense near-black surface when reduced. I have written at length about how regional mineralogy shapes teaware character in <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">The Living Clay: How Regional Minerals Shape the Soul of Teaware</a>, and Akitsu Mumyoi offers one of the most instructive case studies I know of.</p><p>What sets Akitsu Mumyoi apart from generic iron stoneware is the fineness of its particle structure combined with a natural silica content that produces exceptional hardness after firing. The clay fires dense and non-porous enough to hold liquids without weeping, yet retains just enough microporosity to interact meaningfully with tea chemistry — the hallmark of the best Japanese teaware. The role of kiln atmosphere in shaping these qualities is something I have explored in detail in <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">The Fire Within the Clay</a>.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*gyjGmxsF4t2qz6-VqRNTrQ.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired kyūsu — textured brushwork surface. The handle-spout alignment is a signature Tokoname form.</figcaption></figure><h3>Oxidation-Fired Mumyoi: A Rounded, Confident Flavour</h3><p>When fired in an oxidation atmosphere — that is, with full oxygen present throughout the kiln — Akitsu Mumyoi clay produces a vessel that brings a distinctive roundness to the liquor. In practice, this means a teapot or cup that balances the body and aftertaste of the tea in roughly equal measure, neither amplifying bitterness nor softening sweetness excessively. The flavour arrives confident, full, and cleanly finished.</p><p>This profile makes oxidation-fired Akitsu Mumyoi particularly well-suited to oolong teas and black teas — styles where the natural body of the leaf is a key part of the pleasure. Dancong, Wuyi oolongs, Taiwanese high-mountain teas, Yunnan black teas: all of these open up beautifully in an Akitsu Mumyoi pot. The vessel seems to catch the roundness already present in the liquor and amplify it without distortion. It also works well for roasted teas, where the clay’s iron warmth complements the char notes.</p><p>The solid finish I keep returning to is particularly notable. Where some clays create a lingering resonance that can feel unfocused, oxidation-fired Akitsu Mumyoi closes each sip with clarity. This makes it a versatile choice for sessions where you are brewing across multiple infusions — the pot holds its character without accumulating heaviness across the leaves.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*6Es-qav6pPIWjd8ANzoYkA.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired teapot — clean lines, smooth surface, the signature rust-orange body of high-iron oxidation.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*EBDSYsLXpNhpU3Tj_G-_ug.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired — a second form variant showing the subtle variation possible within the same clay and firing.</figcaption></figure><h3>Carbonized Reduction Mumyoi: Softness, Depth, and Fermented Tea</h3><p>Reduction firing introduces carbon into the kiln atmosphere at critical moments, partially starving the clay of oxygen and forcing the iron oxides to shift chemically. The result, with Akitsu Mumyoi, is a vessel whose surface reads almost black — sometimes with subtle brownish undertones that appear in raking light. The texture is often finer to the touch than its oxidation counterpart, the surface carrying a kind of quiet density.</p><p>The tea experience changes significantly. Carbonized reduction firing of Akitsu Mumyoi produces a pot where the body is softer and more receded, while the aftertaste becomes the dominant experience. Teas brewed in these vessels feel lighter on first contact with the palate — but they linger longer, the finish extending through the throat and warming the chest. The aroma, too, becomes more available: reduction-fired Mumyoi seems to clarify and lift aromatic compounds in a way that oxidation firing does not.</p><p>This makes reduction Mumyoi an exceptional pairing for aged and fermented teas — Sheng puerh that has seen a decade or more of storage, aged Liu Bao, mature Hei Cha. The clay’s softened body response actually serves these teas well: their natural intensity does not need reinforcement. What fermented teas often need is clarity of finish and a clean aromatic channel, both of which reduction Mumyoi delivers. I have covered the technical relationship between kiln temperature and atmospheric control in more depth in <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">The Fire Within the Clay: How Temperature and Oxygen Shape Ceramic Vessels</a>, and in the companion <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">Substack piece on vessel creation and baking</a>.</p><blockquote><strong><em>At a glance — Akitsu Mumyoi:</em></strong><em><br></em><strong><em>Oxidation:</em></strong><em> Balanced body and aftertaste · rounded, confident flavour · clean solid finish · best for oolong and black tea<br></em><strong><em>Carbonized Reduction:</em></strong><em> Lighter body · prominent aftertaste · soft, clarified aroma · best for aged and fermented teas</em></blockquote><h3>Nosaka Rough Clay: Earth from the Gold Country</h3><p>Nosaka clay comes from Sawane, a coastal community in Sado City on Sado Island — Japan’s sixth-largest island, located in the Sea of Japan off the coast of Niigata Prefecture. Sado is famous in Japanese cultural history for its gold mines: the Aikawa Gold Mine operated continuously from the 16th century until 1989 and drove much of Edo-period Japan’s monetary economy. The geological legacy of that mineral wealth is still present in Sado’s soils, and Nosaka clay is one of the most compelling expressions of it.</p><p>In its raw state, Nosaka Rough Clay is distinctly yellowish — an unusual hue in the world of Japanese unglazed ceramics. This colouration, along with the clay’s physical properties, has led some ceramicists and tea scholars to draw comparisons with Chinese Zhuni clay from Yixing: both are iron-rich, both fire to a warm orange-red range in oxidation, and both carry a fineness of particle despite their “rough” character. The comparison has limits — the mineral profile of Sado and Yixing are quite different — but it provides a useful first orientation for tea practitioners already familiar with Zhuni wares.</p><p>The phrase “rough clay” in Nosaka’s name refers not to texture in the finished pot but to the clay body’s natural, unprocessed quality — a relative lack of ball-clay additions or industrial refining. This is, in my view, a feature. I have written about how this kind of integrity in the clay body relates to tea flavour in <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">The Clay Itself: How Tokoname and Banko Clay Shape the Final Ceramic Vessel</a>, and the same principles apply here: the less a clay is altered from its natural state, the more it carries the character of its geological source into your cup.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*dDTcIqCOLo9Lhavqiv6Qdw.jpeg" /><figcaption>Nosaka Rough Clay — carbonized reduction. The matte near-black surface reveals the transformation of iron compounds under oxygen-starved firing.</figcaption></figure><h3>Nosaka Rough Clay, Oxidation-Fired: Bold Body, Expansive Profile</h3><p>In oxidation, Nosaka Rough Clay is one of the most body-forward clays I have worked with. Where Akitsu Mumyoi oxidation brings a balanced roundness, Nosaka pushes strongly toward body — the sensation of fullness, weight, and presence in the mouth that tea enthusiasts sometimes describe as “cha qi” or simply as the physical substance of the cup.</p><p>The profile that results is bold and expansive. Brewing a Wuyi rock oolong — a Yancha such as Da Hong Pao or Rou Gui — in an oxidation-fired Nosaka teapot feels almost geological: the mineral backbone of the tea meets the mineral character of the clay and something new emerges, bigger than either would be alone. Yunnan black teas similarly benefit, their natural malt and leather notes amplified into something genuinely imposing.</p><p>The comparison to Yixing Zhuni is perhaps most valid here. Zhuni’s well-documented effect on tea body — its ability to lift and concentrate flavour without distortion — has an analogue in oxidation Nosaka. Tea practitioners who work with Zhuni ware and have found it transformative for high-roast oolongs will likely find Nosaka oxidation teapots a fascinating companion piece. As <a href="https://www.lelezard.com/en/news-22062207.html">Le Lézard</a> noted in a recent feature, my Toronto practice involves precisely this kind of comparative work across historical ceramic traditions.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*hNUOQgDTJSwThnhDPsK97w.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired — horizontal ribbed surface. The teapot form sits low, with a wide belly that maximises thermal mass.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*u4Q0qy1BPrUsUK_XDvtS-Q.jpeg" /><figcaption>Mumyoi oxidation-fired yunomi cup — the same warm iron-red, here expressed in a tall drinking form suited to gyokuro and high-grade greens.</figcaption></figure><h3>Nosaka Rough Clay, Reduction-Fired: Breadth, Aftertaste, and a Gentle Finish</h3><p>In reduction, Nosaka Rough Clay is a more nuanced proposition. The body is still substantial — substantially more so than reduction Mumyoi — but it becomes broader and rounder rather than forward. Where the oxidation version leads with strength, reduction Nosaka leads with width: the flavour spreads across the palate rather than driving forward through it.</p><p>The aftertaste in reduction-fired Nosaka is stronger than in its oxidation counterpart, but what makes it exceptional is the flavour it carries into the finish. The character is not simply bitter or astringent — it is multi-layered, with a gentle sweet undertone that appears only in the throat, several seconds after swallowing. This quality — a lingering finish that carries its own distinct flavour — is one of the most sought-after qualities in fine teaware, and reduction Nosaka clay delivers it consistently.</p><p>This profile suits a wide range of teas that benefit from breadth and gentle complexity: Japanese sencha, other green teas and roasted teas. The clay does not impose its presence on the tea — it opens a wider canvas for the leaf to express itself. I find reduction Nosaka particularly rewarding in slow afternoon sessions, where the extension of flavour across many infusions has time to reveal itself.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*fAO8aHuURijv15EuT0HPrA.jpeg" /><figcaption>Nosaka Rough Clay reduction-fired teapot — smooth surface, pronounced dark finish, with the rounded proportions typical of this clay’s forming character.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*wSTOWx2xo9pPd6mdG8zuZw.jpeg" /><figcaption>Nosaka Rough Clay reduction-fired — a companion teapot showing the slight variation in surface tone that characterises genuine hand-firing.</figcaption></figure><blockquote><strong><em>At a glance — Nosaka Rough Clay:</em></strong><em><br></em><strong><em>Oxidation:</em></strong><em> Strongly enhances body · bold, expansive profile · Yixing Zhuni–adjacent character · best for Wuyi rock oolongs and Yunnan black teas<br></em><strong><em>Carbonized Reduction:</em></strong><em> Broad body · stronger aftertaste · gentle sweet undertone in finish · best for aged whites, dancong, lightly oxidised oolongs</em></blockquote><h3>Beyond the Teapot: Cups and Yunomi</h3><p>Both clay types are also available as cup forms — the Japanese yunomi, a tall cylindrical drinking vessel without a handle, and the more globular Western-style mug. Drinking directly from the clay rather than from porcelain or glass changes the experience in ways that are worth exploring. The warmth of the clay against your hands becomes part of the session; the slight mineral quality of the surface interacts differently with lips and tongue than a glaze does.</p><p>In my Toronto practice, I often recommend that practitioners who are new to unglazed Japanese clay begin with a cup rather than a teapot. The investment is lower, the maintenance is simpler (no spout or strainer to worry about), and the flavour difference is often immediately apparent. A Mumyoi yunomi for a daily gyokuro or bancha, a Nosaka mug for a bold Yunnan black — these are satisfying entry points into this world. I have explored the craft of forming different vessel types in depth in <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">How to Create and Bake Vessels</a>.</p><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*GqIvIAhsJ1of8xs9xUWsLw.jpeg" /><figcaption>Akitsu Mumyoi oxidation-fired mug — the horizontal brushwork texture is tactile and distinctive. The wide rim accommodates aromatic teas well.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*-qk-4xHiFF8FfZWA_62Q8w.jpeg" /><figcaption>Nosaka Rough Clay reduction-fired mug — broader proportions, denser feel in the hand. The surface absorbs light differently than its oxidation counterpart.</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/proxy/1*z2stuNScOJUyjniP6pTmDQ.jpeg" /><figcaption>Nosaka Rough Clay reduction-fired yunomi — tall form, narrow base, the grey-brown surface carrying the mineral memory of Sado Island’s gold country.</figcaption></figure><h3>Choosing Between Mumyoi and Nosaka: A Practical Guide</h3><p>The question I receive most often is: “If I can only choose one, which do I start with?” It depends entirely on your tea habits. Here is how I think about it:</p><h4>Choose Akitsu Mumyoi if…</h4><p>Your primary teas are oolong or black tea, particularly Taiwanese high-mountain oolongs, Wuyi yancha at moderate roast levels, or Yunnan black teas. You value a flavour profile that is confident and well-rounded — one that gives equal weight to body and aftertaste without exaggerating either. You may also be someone who brews the same tea across many infusions and wants a pot that maintains consistent character across a long session.</p><h4>Choose Nosaka Rough Clay if…</h4><p>Body is your primary criterion — if you find yourself drawn to heavy-bodied, mineral-rich teas and want a clay that amplifies rather than rounds that quality. Nosaka oxidation is for the tea enthusiast who wants their Wuyi rock oolong or aged Yunnan to feel like a physical event. Nosaka reduction is for those who seek breadth and a long, complex finish and who often drink aged or lightly oxidised teas that reward patience.</p><p>For the technically curious: I have written a detailed comparison of how different Japanese clay bodies behave during forming and firing in <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">The Clay Itself: How Tokoname and Banko Clay Shape the Final Ceramic Vessel</a>, and for those interested in the role of wood firing, <a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">The Transformative Power of Wood-Fired Kilns</a> covers how ash and combustion byproducts change clay character in ways that electric and gas kilns cannot replicate. The relationship between these concepts and bonsai vessel work is explored in <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">The Craft of Bonsai Pots</a>.</p><h3>A Toronto Potter’s Perspective on Rare Japanese Clay</h3><p>Working in Toronto as a Tokoname-trained potter, I occupy an unusual position. Tokoname is one of Japan’s Six Ancient Kilns — a tradition that stretches back nine centuries and whose red clay teapots are among the most celebrated in the world. My training there was, in many ways, a deep education in the relationship between iron-rich clay and the physical character of tea. You can read about that background in a recent <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">CEOWorld Magazine feature</a> on my practice.</p><p>Bringing Akitsu Mumyoi and Nosaka clay to Toronto feels like an extension of that education — introducing two new voices into a conversation about mineral character and flavour that I have been having since my earliest days at the wheel. Toronto’s tea community is sophisticated and curious; I regularly encounter practitioners here who have spent years developing relationships with specific Yixing clays or Jianshui wares, and who are increasingly interested in Japanese ceramic traditions as a complement to that knowledge. As <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">Yahoo Finance</a> reported in a recent piece, I have also been vocal about the importance of preserving artisan ceramic traditions globally, including the sourcing and documentation of rare regional clays.</p><p>I document much of this work on <a href="https://hectorkonomi.wordpress.com/">my blog</a> and on <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">my Substack newsletter</a>, where I write regularly about the intersection of clay science, tea culture, and the specific challenges of maintaining a Japanese pottery practice in a North American context. My ongoing research into these clay types is registered through <a href="https://orcid.org/0009-0007-8656-5000">ORCID</a> and I share project updates on <a href="https://github.com/hectorkonomi1">GitHub</a>.</p><blockquote><strong><em>Research record:</em></strong><em> My ongoing research into Japanese clay bodies, firing atmosphere and tea flavour is registered under my ORCID iD — </em><a href="https://orcid.org/0009-0007-8656-5000"><strong><em>orcid.org/0009–0007–8656–5000</em></strong></a><em>. It is the most complete record of my published work and research activity.</em></blockquote><h3>Where to Find These Pieces</h3><p>These Akitsu Mumyoi and Nosaka Rough Clay vessels are now available through my online shops and Toronto studio. Teapots, yunomi cups, and mug forms are represented in the current collection, with limited quantities of each firing type available.</p><p>You can browse and purchase directly through <a href="https://www.etsy.com/shop/HectorKonomi">HectorKonomi on Etsy</a>, <a href="https://www.etsy.com/shop/HectorKonomi2">HectorKonomi2 on Etsy</a>, and <a href="https://www.etsy.com/shop/HectorKonomiJapan">HectorKonomiJapan on Etsy</a> — the last of which carries pieces sourced and fired directly in Japan. My <a href="https://www.hectorkonomitoronto.com/">Toronto studio website</a> also carries current inventory, with additional notes on each piece’s specific firing history.</p><p>If you have questions about specific pieces, pairings, or want to discuss commissioning a form for a particular tea you love, I am available through <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a>, through <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a>, or at <a href="https://about.me/hector_konomi">about.me/hector_konomi</a>. I also maintain a public profile on <a href="https://www.crunchbase.com/person/hector-konomi">Crunchbase</a> and share informal updates on <a href="https://www.tumblr.com/hectorkonomi">Tumblr</a> and <a href="https://x.com/hectorkonomi2">X</a>.</p><h3>Closing Thoughts: The Clay Remembers</h3><p>Every clay carries the memory of its landscape. Akitsu Mumyoi carries the iron-red earth of Sado’s gold-mine tunnels, and every cup brewed in an Akitsu Mumyoi vessel is, in some small way, in conversation with that geography. Nosaka Rough Clay carries the mineral legacy of Sado’s gold country — the same earth that once financed the Edo shogunate now sits on your table, transforming the temperature and chemistry of your afternoon tea.</p><p>This is what I love most about unglazed Japanese ceramics: the directness of the relationship between place, material, fire, and cup. No glaze intervenes. No industrial processing obscures. The clay is what it is, the fire does what it does, and the tea tells the story of both.</p><p>I hope these notes help you find the right companion for your table. And if you have questions — about specific teas, specific clays, or the broader practice of choosing teaware — please reach out. The conversation is the best part. You can also continue reading on <a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">my Substack on clay and flavour</a>, and on <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">wood-fired kilns</a>. If bonsai vessels interest you, see also <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">this Substack piece</a>.</p><p>Until next time — keep brewing.</p><p><strong><em>— Hector Konomi</em></strong><br>Toronto, Ontario · October 2026</p><h3>About the Author</h3><p><strong>Hector Konomi</strong> is a Tokoname-trained potter based in Toronto, Ontario. His practice focuses on unglazed Japanese stoneware in the Tokoname tradition, with particular interest in the relationship between clay mineralogy and tea flavour. His work and writing can be found at <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a>, and his vessels are available through his <a href="https://www.hectorkonomitoronto.com/">Toronto studio</a> and <a href="https://www.etsy.com/shop/HectorKonomi">Etsy shops</a>. His research is registered on ORCID: <a href="https://orcid.org/0009-0007-8656-5000"><strong>0009–0007–8656–5000</strong></a>. He is also active on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a> and <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a>.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=dde48c88e40d" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Throwing the Gaiwan: Kyoto Refinement, Korean Earthiness, and What a Toronto Potter Takes from Both]]></title>
            <link>https://hectorkonomi1.medium.com/throwing-the-gaiwan-kyoto-refinement-korean-earthiness-and-what-a-toronto-potter-takes-from-both-de7abe70d567?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/de7abe70d567</guid>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Thu, 24 Sep 2026 02:18:09 GMT</pubDate>
            <atom:updated>2026-09-24T02:18:09.759Z</atom:updated>
            <content:encoded><![CDATA[<p><em>By </em><a href="https://www.hectorkonomi.com/">Hector Konomi</a><em> — Tokoname-trained potter at </em><a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a><em>, Toronto, Canada</em></p><p>⸻⸻⸻</p><p>The gaiwan is, on the surface, a simple object: a lidded bowl, a saucer, three components that nest together in the hand of a tea drinker. Its origins lie in Ming Dynasty China, and for five centuries it has functioned as one of the fundamental vessels of East Asian tea culture. But the simplicity is deceptive. The gaiwan is among the most technically demanding forms a production potter can throw, and the traditions that have grown up around it — in Kyoto’s imperial ceramic culture and in the court ceramics of Joseon Korea — represent two profoundly different answers to the question of what a bowl for tea should be.</p><figure><img alt="Hector Konomi pottery Toronto" src="https://cdn-images-1.medium.com/max/850/1*eBfTFt4bnRqbrYrqOiHgyw.jpeg" /></figure><p>As a Tokoname-trained potter working at <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a>, my engagement with the gaiwan sits at the intersection of these two traditions. Tokoname’s clay practice belongs primarily to the teapot world — the kyusu — but the discipline of lidded vessel throwing, the attention to how clay bodies interact with heat and liquid, and the philosophical framework of wabi and function-before-decoration all apply directly to the gaiwan. This article is a technical and historical examination of how the Kyoto and Korean traditions approach the throwing of this form — and what their differences reveal about ceramics as a whole.</p><p>For more background on my practice and training, see <a href="https://www.hectorkonomi.com/about/">About Hector Konomi</a>.</p><p>⸻⸻⸻</p><h3>What Is a Gaiwan? Form, Function, and the Three-Part Vessel</h3><p>The gaiwan — written 蓋碗 in Chinese, meaning literally “lid-bowl” — consists of three discrete components: the tuō (托), a saucer that supports the bowl and protects the fingers from heat; the wǎn (碗), the bowl itself, which holds the tea and leaves; and the gài (蓋), the lid, which controls steeping, strains leaves during pouring, and retains heat.</p><p>The three components are functionally interdependent. The lid must sit within the rim of the bowl without slipping, sealing tightly enough to retain heat but loosely enough to be tilted for pouring without admitting leaves. The saucer must be sized to support the bowl stably without gripping it, since the bowl will be hot and must be released easily. The bowl’s profile — its angle of flare, its foot ring height, its wall thickness — determines how the hand holds it, how the heat is distributed, and how well the lid can be operated with a single hand.</p><figure><img alt="Hector Konomi pottery Toronto" src="https://cdn-images-1.medium.com/max/850/1*qRtMMZWKEXMWzFPuJJWwyA.jpeg" /></figure><p>These interlocking functional requirements make the gaiwan a genuine test of the potter’s precision. A kyusu teapot tolerates certain proportional variations because the spout and handle mediate the user’s relationship with the vessel. The gaiwan offers no such mediation: the hand holds the bowl directly, the lips drink from the rim, and every dimensional decision made at the wheel is experienced directly by the person using the piece.</p><p><em>Understanding how different clay bodies respond to the thermal demands of a gaiwan — particularly the relationship between wall thickness, porosity, and heat retention — is documented in my essay on </em><a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">How Regional Minerals Shape the Soul of Teaware</a><em>. The mineral composition of the clay is not incidental to function; it is constitutive of it.</em></p><p>⸻⸻⸻</p><h3>The Kyoto Tradition: Precision, Porcelain, and the Imperial Aesthetic</h3><h3>Historical Context</h3><p>Kyoto’s ceramic tradition — Kyo-yaki, and its sub-tradition Kiyomizu-yaki centred on the kilns of the Higashiyama district — developed in direct relationship with imperial and aristocratic culture. From the sixteenth century onward, Kyoto potters were producing work for the court, for the great tea masters, and for the Buddhist temples that defined Kyoto’s cultural landscape. The aesthetic that emerged from this context is one of the most refined in all of world ceramics: precise, often opulent, deeply attentive to surface decoration, and technically demanding in ways that have nothing to do with rusticity.</p><p>The gaiwan arrived in Kyoto through the same channels by which Chinese tea culture permeated Japanese aristocratic life — the Zen temples, the trade networks, and the cultural exchange that accelerated through the Edo period. Kyoto potters adapted the form to their own aesthetic language, producing gaiwans in porcelain and fine stoneware that reflected the refined sensibility of their patrons.</p><h3>Throwing Technique: The Kyoto Approach</h3><p>Kyoto gaiwan throwing is characterised by extreme attention to wall thinness, consistent profile, and precise dimensional control. The ideal Kyoto gaiwan bowl wall, at its mid-point, is typically two to three millimetres — thin enough to transmit heat to the fingers as a warning but not so thin as to be fragile. Achieving this consistently on a production basis requires a level of centring and pressure control that comes only with years of repetitive practice.</p><figure><img alt="Hector Konomi pottery Toronto" src="https://cdn-images-1.medium.com/max/945/1*wZeoLps0v_vfUeWcoa5-OA.jpeg" /></figure><p>The Kyoto throwing sequence for a gaiwan bowl generally proceeds as follows: the clay is centred and opened to a floor thickness of approximately eight to ten millimetres. The walls are pulled upward with the fingers inside and a supporting knuckle outside, applying lateral pressure progressively from the base upward. The characteristic Kyoto profile is a gently flaring cone — wider at the rim than at the foot — with a slight inward curve near the top that defines the gallery where the lid will seat.</p><p>That gallery — the internal ledge or profile change that keeps the lid in place — is one of the most technically precise elements of Kyoto gaiwan throwing. Too abrupt a transition and the lid rattles; too gradual and it slides. The rim itself is typically finished with a subtle inward compression that creates a clean seat for the lid flange while defining the drinking edge precisely. In traditional Kyoto practice, this compression is made with a dampened leather or chamois tool rather than the fingers, to avoid distortion.</p><p>The lid is thrown separately, typically from a ball of clay placed on the wheel head and opened downward — a technique sometimes called “throwing off the hump” for lidded forms, in which a series of lids are thrown sequentially from a single mass of clay, cut free, and set aside to stiffen before trimming. The Kyoto lid profile is typically low and domed, with a ring foot on its upper surface that becomes the knob. The critical measurement is the internal diameter of the lid flange, which must correspond precisely to the external diameter of the bowl’s gallery.</p><p>The saucer is the most forgiving of the three components to throw, but the most demanding to trim. A Kyoto saucer typically has a defined central well — a raised ring that locates the bowl and prevents it from sliding — which must be trimmed to precisely the right diameter and depth to hold the bowl without gripping it.</p><h3>Firing and Surface in the Kyoto Tradition</h3><p>Kyoto gaiwans are most commonly fired in oxidising atmospheres — electric or gas-fired in oxidation — that allow the precise surface decoration for which Kyo-yaki is famous: painted overglaze enamels, gold lustre, delicate underglaze blue. The kiln atmospheres used in Tokoname-style firing, and the reduction techniques central to my own practice as described in <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">inside Hector Konomi’s wood-fired kiln practice</a>, are largely incompatible with this decorative tradition. Kyoto and Tokoname represent different value systems: one prizes the applied mark of the artist’s brush; the other prizes the unmediated mark of fire.</p><p>⸻⸻⸻</p><h3>The Korean Tradition: Joseon Covered Bowls and the Aesthetics of Restraint</h3><h3>Historical Context</h3><p>Korea’s ceramic history is one of the great achievements of world craft. The celadon tradition of the Goryeo dynasty (918–1392) produced work of extraordinary sophistication — jade-green glazed stonewares that Chinese critics acknowledged as among the finest in the world. But it is the Joseon dynasty (1392–1897) that produced the ceramic tradition most directly relevant to a comparison with the Kyoto gaiwan: the buncheong ware of the fifteenth and sixteenth centuries and the white porcelain of the following two centuries embody a philosophical stance toward ceramics that differs fundamentally from the Kyoto approach.</p><p>The Joseon aesthetic, shaped by the Neo-Confucian philosophy of the dynasty’s ruling class, prized restraint, utility, and a form of natural dignity over ornament and display. Joseon white porcelain — baekja — is austere in a way that Kyoto ceramics, even at their most disciplined, rarely are. The surface is bare or minimally decorated. The form is defined by its proportion and its relationship to use, not by what has been applied to it. This stance is, in important ways, closer to the wabi sensibility of the Japanese tea ceremony than the decorated tradition of Kyo-yaki — and it is no coincidence that the Japanese tea masters of the sixteenth century coveted Korean ceramics as highly as any domestic production.</p><figure><img alt="Hector Konomi pottery Toronto" src="https://cdn-images-1.medium.com/max/567/1*m1W_8rcvSxOrxpOfNHjzDA.jpeg" /></figure><p>The Korean potters brought to Japan during and after Hideyoshi’s invasions — the “pottery wars” of 1592–1598 — founded several of Japan’s most important ceramic traditions, including the Satsuma and Arita schools. The influence runs deep in Japanese ceramics, and it runs through Tokoname history as well. As I discuss in <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">Hector Konomi speaks on the Tokoname craft</a>, understanding Tokoname means understanding the Korean roots of many of its technical foundations.</p><h3>Korean Covered Bowl Throwing: The Joseon Approach</h3><p>The Korean approach to throwing covered bowls — whether the covered rice bowls (bap geurit) of everyday Joseon life or the more refined tea-related wares — differs from the Kyoto approach in several fundamental ways, beginning with the clay body itself.</p><p>Joseon white porcelain is made from kaolin-rich clay of remarkable purity, fired to high temperatures — typically 1,280°C to 1,320°C — in reduction-influenced atmospheres that develop the characteristic cool, slightly blue-white surface. The throwing of this clay requires a different set of skills than the softer, more plastic bodies used in Kyo-yaki: kaolin-rich porcelain is short and unforgiving, resisting the pulling and thinning that more plastic clays accommodate. Korean master potters developed throwing techniques that work with this resistance rather than against it, keeping the pulling movements shorter and more numerous, building wall height through repetition rather than sustained pressure.</p><p>The profile of a Joseon covered bowl is typically more restrained than a Kyoto gaiwan — a quieter flare, a more vertical wall, a foot ring that is slightly higher and more carefully finished than might be expected from what appears at first glance to be a utilitarian object. The foot ring, in Korean ceramic practice, is one of the primary markers of quality: the angle of the cut, the relationship between the outer wall of the foot and the base of the bowl, and the texture left by the trimming tool are all considered as deliberate aesthetic decisions, not incidental marks of process.</p><p>This attention to the foot ring connects directly to the Japanese tea ceremony’s valorisation of the bottom of the bowl — the aspect that is visible when the bowl is turned in the hands during the contemplative examination that precedes drinking. The Korean tradition’s careful foot ring finishing fed directly into the Japanese tradition’s philosophical elevation of this feature to an aesthetic subject in its own right.</p><h3>The Lid in Korean Practice</h3><p>The Korean covered bowl lid differs from the Kyoto gaiwan lid in both profile and function. Where the Kyoto lid is typically low, domed, and equipped with a loop or ring knob designed for one-handed operation in the tea-service context, the Korean lid tends to be taller and more generous — reflecting its origin in rice and soup vessels where the lid must seal against steam and retain heat over a meal rather than be operated repeatedly during a tea-pouring sequence.</p><p>The throwing of the Korean lid follows a different logic from the Kyoto approach. Rather than a low dome thrown off the hump, the Korean covered bowl lid is more commonly thrown as a small bowl or cap form — wider and taller — that is then inverted and trimmed to create the appropriate profile. The knob is often a substantial button or ring, thrown or pulled, rather than the delicate loop of the Kyoto tradition.</p><p>This approach to the lid reflects a difference in the vessel’s relationship to the hand. The Korean covered bowl is held with both hands in the manner of everyday use — the bowl cradled in the palm, the lid lifted or tilted with the opposite hand. The Kyoto gaiwan is held and operated with one hand, lid and bowl managed simultaneously by a skilled tea server. These different use patterns produce different lid profiles, different knob proportions, and different tolerance requirements for the fit between lid and bowl.</p><p><em>The relationship between clay body composition, throwing technique, and fired surface — particularly relevant to both Korean and Kyoto traditions — is examined in depth in my pieces on </em><a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">how Tokoname and Banko clay shape the final vessel</a><em> and </em><a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">how Tokoname and Banko clay shape ceramic character</a><em>. The mineralogical differences between clay bodies are not secondary to technique; they shape what technique is possible.</em></p><p>⸻⸻⸻</p><h3>A Direct Technical Comparison: Throwing Decisions at Each Stage</h3><h3>Centering and Opening</h3><p>Both traditions begin with centering — the fundamental act of bringing the clay into true rotation before opening. But the clay bodies involved respond differently to this stage. The highly plastic, relatively iron-rich clays associated with Kyoto’s stoneware gaiwans (as opposed to its porcelain production) centre easily and forgive imbalance. The short, kaolin-rich clays of Joseon white porcelain require more precise centering from the outset, because the clay’s low plasticity means that errors propagate rather than absorb during the subsequent throwing stages.</p><p>The opening — the creation of the floor and initial cavity — also differs. Kyoto practice tends to open the clay in a single deliberate movement, establishing the floor thickness immediately and proceeding to pulling. Korean practice with stiff porcelain clay is more likely to open in stages, compressing and re-centring between openings to maintain the clay’s structural integrity.</p><h3>Wall Pulling and Profile Development</h3><p>The Kyoto gaiwan’s characteristic flared profile is developed through a series of pulling movements that deliberately angle the wall outward as it rises. This is achieved by applying slightly more pressure from the inside finger than from the outside, causing the wall to lean outward progressively with each pull. The angle must be consistent from pull to pull, and the wall must remain even in thickness throughout — thicker at the base for structural support, progressively thinner toward the rim.</p><figure><img alt="Hector Konomi pottery Toronto" src="https://cdn-images-1.medium.com/max/709/1*vGg0iz4Kfk52m7cW0BZ9jA.jpeg" /></figure><p>The Korean tradition’s more vertical profile is maintained by keeping the inside and outside pressures more balanced, pulling upward with less outward intention. The result is a wall that rises more steeply, with a different relationship between the volume of the interior and the exterior footprint of the vessel. Both approaches require high precision, but the errors that destroy a piece at this stage are different: the Kyoto potter watches for uneven flare and wall-thickness variation; the Korean potter watches for the wall beginning to cant inward or lose its circular section under the compression of stiff clay.</p><h3>Rim Finishing and Gallery Creation</h3><p>The gallery — the seat for the lid — is created differently in each tradition. In Kyoto practice, the gallery is typically formed by pressing a finger inward at the rim while the wheel rotates, creating a subtle step or compression that defines a precise ledge. This requires excellent wheel speed control and a steady hand, since the rim at this point is the thinnest and most vulnerable part of the vessel.</p><p>In Korean practice, where the lid sits into rather than onto the rim, the gallery is often formed by leaving the top portion of the rim slightly thicker and then using a wire or needle tool to incise a line that will guide the trimming of the gallery during the leather-hard stage. This deferred approach — leaving the precision work to trimming rather than throwing — is a pragmatic response to the difficulty of forming fine detail in stiff, short clay on a rotating wheel.</p><h3>Foot Ring Trimming</h3><p>The foot ring is where the two traditions diverge most visibly. The Kyoto foot ring is typically neat and precise — a clean, upright wall of consistent height, finished with a fine tool and often burnished or smoothed. It is elegant and unobtrusive, not intended to draw attention to itself.</p><p>The Korean foot ring is a deliberate aesthetic statement. The trimming tool is often held at a slight angle, creating a foot ring whose outer wall leans slightly inward or outward — giving the pot a quality the Koreans call “sprung,” as if the vessel is pressing gently against the table rather than simply resting on it. The texture left by the trimming tool is valued rather than erased: the spiral of the cut, the slight roughness of the clay surface, the relationship between the colour of the trimmed clay and the glazed or unglazed outer wall.</p><p>This philosophical difference in foot ring treatment maps onto a larger difference in how the two traditions understand the relationship between process and product. In the Kyoto tradition, the process should be invisible in the finished object — the craft conceals itself behind the surface of the work. In the Korean tradition, and in the Japanese traditions most influenced by it (Bizen, Shigaraki, and — though differently — Tokoname), the process is part of the content of the work. The mark of making is not a defect to be erased but a record to be honoured.</p><p><em>My writing on how firing atmosphere and temperature interact with these surface qualities is collected in </em><a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">how temperature and oxygen shape ceramic vessels</a><em> and </em><a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">mastery of the kiln</a><em>. For the full procedural context of preparing and firing these vessels, see my </em><a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">Practical Guide to Baking Vessels</a><em> and </em><a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">how to create and bake ceramic vessels</a><em>.</em></p><p>⸻⸻⸻</p><h3>The Tokoname Perspective: How My Training Reads These Traditions</h3><p>Neither the Kyoto gaiwan tradition nor the Korean covered bowl tradition is my primary practice. My training is in Tokoname, and Tokoname’s primary lidded vessel is the kyusu teapot, not the gaiwan. But the Tokoname tradition is itself a synthesis — it draws on continental Chinese forms, on the Korean ceramic influence that reshaped Japanese pottery in the sixteenth and seventeenth centuries, and on the indigenous Japanese aesthetic of wabi that transformed all of these materials into something distinctly its own.</p><p>When I throw a gaiwan in my Toronto studio, I draw most directly on the Korean tradition’s understanding of the foot ring and the clay surface — the sense that the material has its own voice and that the potter’s job is to listen rather than to impose. But I draw on the Kyoto tradition’s precision in lid fitting and rim finishing — the understanding that certain functional requirements are non-negotiable and that discipline in service of function is its own form of beauty.</p><p>The clay I use for gaiwans in Toronto is a blend — locally sourced materials combined with materials imported in the Tokoname tradition — that produces a surface character and a firing behaviour different from either the Kyoto porcelain or the Joseon kaolin body. As I document in <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">How Regional Minerals Shape the Soul of Teaware</a>, the minerals available in the Ontario clay landscape produce their own aesthetic logic when fired to high temperatures. I do not try to reproduce Korean or Kyoto surfaces; I try to apply the principles of those traditions to the materials actually available to me, in the city I actually live in.</p><p>Toronto’s ceramics community has been an important sounding board for this work. The city’s extraordinary cultural diversity — its Korean, Chinese, Japanese, and South and Southeast Asian communities, all with their own relationships to lidded tea vessels — creates an audience capable of reading these traditions with sophistication. When I show a gaiwan at a Toronto ceramics market, I am not explaining an exotic form to an uninformed audience; I am presenting a version of something that people in the room have held and used all their lives. That is a rare and valuable condition for a ceramics practice, and it shapes the work I make.</p><p>⸻⸻⸻</p><h3>Common Technical Challenges in Gaiwan Throwing</h3><h3>The Lid-to-Bowl Fit</h3><p>The single most common source of failure in gaiwan production is poor lid-to-bowl fit — a lid that either falls into the bowl or rattles on top of it, that tilts rather than sitting level, or that seats so tightly as to be difficult to open after firing. All of these failures have specific technical causes that can be identified and corrected.</p><p>The fundamental source of fit error is differential shrinkage: the bowl and the lid are thrown from separate pieces of clay, and if they are not from identical clay batches at identical moisture levels, they will shrink at different rates during drying and firing. A lid that fits perfectly when leather-hard may be too tight after bisque firing and too loose after the final firing, because the clay body shrank more on the second firing than on the first.</p><p>Both the Kyoto and Korean traditions manage this problem differently. Kyoto practice typically involves making multiple lids for each bowl and matching them after bisque firing, discarding those that do not fit. Korean practice is more likely to fire bowl and lid together, in contact, so that they shrink at identical rates — a technique that risks the lid fusing to the bowl if the fit is too tight or the firing too hot, but which produces consistent results when executed well.</p><h3>Wall Evenness and Thermal Stress</h3><p>Uneven wall thickness is the second major source of gaiwan failure, and it manifests not at the wheel but in the kiln. A wall that varies significantly in thickness from one side to the other will develop thermal gradients during both the heating and cooling phases of the firing — areas that heat or cool faster than adjacent areas — and the stress created by these gradients can crack the piece at any point in the process.</p><p>The Tokoname discipline, with its emphasis on the kyusu’s functional precision, trains potters to identify wall evenness by touch during throwing — running the fingers lightly up the interior wall while the wheel rotates, feeling for variations in thickness that the eye alone might miss. This tactile quality control is directly applicable to gaiwan throwing and is one of the techniques I teach in my Toronto studio workshops.</p><h3>The Knob</h3><p>The knob of the gaiwan lid is the smallest element of the three-component vessel and the one most likely to be treated as an afterthought. It should not be. The knob must be comfortable to hold when the lid is hot — which means it must be large enough to grip without burning the fingers, positioned at the true centre of the lid so that the lid balances when lifted, and attached to the lid with sufficient structural integrity to survive both firing stress and repeated daily use.</p><p>Kyoto tradition typically produces a loop or ring knob — elegant, minimal, suited to the one-handed gaiwan operation of formal tea service. Korean tradition more commonly produces a button or boss knob — more substantial, suited to two-handed bowl handling. My own Toronto practice has developed a hybrid approach: a knob that is substantial enough to grip confidently but refined enough not to dominate the lid’s profile — a solution arrived at through the practical testing that only repeated production can provide.</p><p>⸻⸻⸻</p><h3>Gaiwans in Toronto: Making, Collecting, and the Cross-Cultural Conversation</h3><p>The gaiwan is not a traditional Tokoname form — the kyusu teapot is Tokoname’s defining vessel — but the discipline that Tokoname training instils is fully applicable to the gaiwan, and the result is a form of cross-traditional dialogue that I find genuinely productive. My Toronto studio produces gaiwans in limited quantities, available through my <a href="https://www.etsy.com/shop/HectorKonomi2">primary Etsy shop</a>. More experimental gaiwan work — pieces that push against the conventions of both the Kyoto and Korean traditions — appears in my <a href="https://www.etsy.com/shop/HectorKonomi">experimental Etsy shop</a>. Earlier work, including gaiwans made during my training years in Japan, is occasionally available through my <a href="https://www.etsy.com/shop/HectorKonomiJapan">archival Etsy shop</a>.</p><p>Toronto’s tea culture is, like the city itself, richly multicultural. There are serious gong fu tea practitioners here, Korean tea ceremony communities, Japanese chado groups, and a growing population of younger tea drinkers who have come to appreciate the gaiwan not through any single national tradition but through the global tea culture that has flourished online. Making gaiwans in this context is not a matter of choosing between Kyoto and Korean models — it is a matter of understanding both well enough to serve a community that understands both.</p><p>I document the making of specific pieces — including gaiwan production — on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a>, where the visual sequence from clay to finished vessel is perhaps the best way to understand the throwing decisions I have described in this article. The longer technical and philosophical writing lives on <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a>. My visual reference archive — including historical photographs of Korean and Kyoto gaiwans from museum collections — is on <a href="https://www.tumblr.com/hectorkonomi">Tumblr archive</a>. And for those interested in the research dimension of the practice, my <a href="https://orcid.org/0009-0007-8656-5000">ORCID research profile</a> profile catalogues peer-reviewed contributions to ceramic materials science, while <a href="https://github.com/hectorkonomi1">GitHub</a> hosts the open-source kiln and studio tools I have developed for practising potters.</p><p>My writing on related forms — particularly the bonsai container work that has become a significant part of my Toronto practice — is documented in <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">bonsai container work in Toronto</a> and the technical <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">The Craft of Bonsai Pots</a> guide. The discipline of throwing lidded vessels and the discipline of throwing bonsai containers share a foundation: both demand that the maker subordinate aesthetic preference to the functional requirements of the object’s use.</p><p>⸻⸻⸻</p><h3>Two Traditions, One Bowl</h3><p>The Kyoto gaiwan and the Korean covered bowl are not simply two versions of the same vessel. They are the material expressions of two different philosophical stances toward ceramics — toward the relationship between craft and culture, between the maker’s intention and the material’s nature, between precision and openness.</p><p>The Kyoto tradition says: the vessel should be perfect. Every dimension should be calculated, every surface should be refined, every aspect of the making should be resolved in the finished object. This is an admirable goal, and the gaiwans produced within this tradition are among the most beautiful functional ceramics in the world.</p><p>The Korean tradition says: the vessel should be honest. The clay should be allowed to be what it is. The marks of making should remain legible. The foot ring should carry the evidence of the trimming tool. The glaze should pool where it pools and thin where it thins. This too is an admirable goal, and the covered bowls produced within this tradition have a directness and a presence that no amount of refinement can produce.</p><p>As a Tokoname potter working in Toronto, I live between these two positions. Tokoname’s discipline is closer to the Kyoto tradition in its precision and its functional exigency — a kyusu teapot must pour well, and there is no room for the beautiful failure. But Tokoname’s relationship with unglazed clay, with iron-rich surfaces, and with the mark of fire connects it to the Korean tradition’s valuation of material honesty. The gaiwan, for me, is a form that allows these two inheritances to speak to each other.</p><p>All the writing behind this article — on kilns, clay, firing, and form — is gathered at <a href="https://www.hectorkonomi.com/">Hector Konomi</a>. I am also reachable on <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a>, <a href="https://x.com/hectorkonomi2">X</a>, and through my <a href="https://about.me/hector_konomi">professional resume</a> and <a href="https://www.crunchbase.com/person/hector-konomi">Crunchbase</a> profiles. The most recent overview of the practice is in <a href="https://www.lelezard.com/en/news-22062207.html">an independent profile of his practice</a>. My ongoing advocacy for craft traditions worldwide — traditions like these, which deserve support and attention — is set out in my piece on <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">global support for craftspeople</a>.</p><p>⸻⸻⸻</p><p><em>Hector Konomi is a Tokoname-trained ceramic artist based in Toronto, Canada. He produces kyusu teapots, gaiwans, bonsai containers, and wood-fired vessels rooted in the Tokoname tradition. He writes on kiln technique, clay science, and cross-cultural ceramic history at </em><a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a><em>.</em></p><p><strong>Tags: </strong>Hector Konomi · Gaiwan · Gaiwan Throwing · Kyoto Ceramics · Korean Ceramics · Joseon Pottery · Tokoname · Toronto Pottery · Hector Konomi Toronto · Hector Konomi Pottery · Japanese Ceramics Toronto · Gaiwan Technique · Lidded Vessel Throwing · Tea Ceramics</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=de7abe70d567" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Throwing Tokoname-Style Teapots: A Toronto Potter’s Guide to Centuries-Old Technique]]></title>
            <link>https://hectorkonomi1.medium.com/throwing-tokoname-style-teapots-a-toronto-potters-guide-to-centuries-old-technique-4bf77578cad7?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/4bf77578cad7</guid>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Sat, 09 May 2026 19:57:01 GMT</pubDate>
            <atom:updated>2026-05-10T23:46:49.579Z</atom:updated>
            <content:encoded><![CDATA[<p><em>By Hector Konomi</em></p><p>When I tell people in Toronto that I throw Tokoname-style teapots, the first question is almost always the same: <em>what makes a Tokoname teapot different from any other teapot?</em> The honest answer is that the difference lives in the details — the clay, the wall thickness, the way the spout meets the body, the integrated strainer pulled from the same wall as the pot itself. None of it is dramatic on its own. Together, it is the reason a properly made Tokoname <em>kyusu</em> pours like water from a tap and improves the tea inside it.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*3Ak-JFYuM-kOcwB7kePSdg.jpeg" /></figure><p>I work out of a studio here in Toronto, and over the years I’ve spent learning this tradition I’ve come to believe that Tokoname technique deserves to be better known among Canadian potters and tea drinkers. This article is my attempt to share what I’ve learned about throwing these pots — the practical, on-the-wheel realities behind the form.</p><p>If you’d like to see finished examples of the work I’m describing, you can find my current pots and studio information at <a href="https://www.hectorkonomitoronto.com/">hectorkonomitoronto.com</a>.</p><h3>A Brief Note on Why Tokoname Matters</h3><p>Tokoname is one of the Six Ancient Kilns of Japan (the <em>Rokkoyō</em>), with a continuous ceramic tradition stretching back roughly nine hundred years. It sits on the Chita Peninsula in Aichi Prefecture, and its reputation rests on a single material: an iron-rich red clay called <em>shudei</em>. When <em>shudei</em> is fired in reduction, the iron in the clay body reacts chemically with the tannins in green tea, softening astringency and rounding out flavor. This is not a marketing claim. It’s chemistry, and it’s the reason Japanese tea drinkers have prized Tokoname teapots for centuries.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*qSZeG5mlM-G6iU0iH0zweg.jpeg" /></figure><p>For a potter, <em>shudei</em> is also a joy to throw. It’s plastic, fine-grained, and forgiving on the wheel — which it needs to be, because Tokoname teapots are thrown thinner than almost any other functional pot you’ll make.</p><h3>Wedging and Preparing the Clay</h3><p>Tokoname clay arrives dense. Before I touch the wheel, I spend real time on wedging — usually ten to fifteen minutes per ball. The goal is two things at once: aligning the clay particles and removing every air bubble. Thin walls are unforgiving of trapped air, and a single bubble in the spout area can crack open during firing.</p><p>I weigh out balls in three sizes for a single teapot:</p><ul><li>The body (<em>dō</em>) — typically 200 to 280 grams for a 200 ml pot</li><li>The spout (<em>sosogi-guchi</em>) — around 40 to 60 grams</li><li>The lid (<em>futa</em>) — around 50 to 70 grams</li></ul><p>The handle, in the case of a side-handled <em>kyusu</em>, is hand-built rather than thrown.</p><h3>Throwing the Body</h3><p>Centering Tokoname clay is straightforward if your wedging is good. I open the ball low and slow, leaving a generous floor — Tokoname pots have a specific foot profile and you’ll trim the base later, so don’t go thin at the bottom yet.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*aDpZentDwXc7i_4_BWnayw.jpeg" /></figure><p>The first pull establishes the wall. The second pull is where Tokoname technique starts to diverge from Western expectations. A traditional <em>kyusu</em> wall is roughly 2 to 3 millimeters thick — thin enough that the pot feels almost weightless when finished, but thick enough to hold its form during attachment of the spout and trimming. I work with very wet hands and minimal pressure. Three pulls is usually my maximum; more than that and the clay starts to fatigue.</p><p>The shoulder of the pot — where the body curves inward toward the lid gallery — is the structurally critical zone. The lid will sit here, and the gallery has to be perfectly round and level. I use a wooden rib to compress the shoulder on the final pull, which strengthens it and gives a clean line for the lid to seat against.</p><h3>Throwing and Attaching the Spout</h3><p>The spout is, in my opinion, where Tokoname potters earn their reputation. A well-made <em>sosogi-guchi</em> pours without dripping, cuts off cleanly when you tilt the pot back, and produces a single steady stream rather than a splatter.</p><p>I throw the spout as a tall, thin-walled cone — narrower at the tip than at the base, with a slight inward curve. The wall thickness at the tip should be paper-thin, almost translucent when held to the light. After throwing, I let the spout firm up to leather-hard before cutting and attaching.</p><p>The cut where the spout meets the body is angled, not straight. I use a sharp knife to make a long oval opening in the body, score both surfaces aggressively, slip them with a clay-and-water mixture matching the body, and press the spout into place. A clean attachment is invisible from the outside once the seam is smoothed.</p><p>The angle of the spout relative to the body determines the pour. Too vertical and the pot will dribble; too horizontal and you lose pouring control. I aim for the tip of the spout to sit at roughly the same height as the rim of the body — a rule of thumb that almost always produces a clean pour.</p><h3>The Integrated Strainer (Sasame)</h3><p>This is the technique most home potters in North America are surprised by: in a traditional Tokoname <em>kyusu</em>, the strainer is not a separate ceramic insert or metal mesh. It’s a series of small holes pierced directly through the wall of the body, on the inside surface where the spout attaches.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*3_6BUEGQ92jRlvMtPQFJAA.jpeg" /></figure><p>I pierce these holes when the pot is leather-hard, using a small metal needle tool. A typical <em>kyusu</em> will have anywhere from forty to over a hundred holes in a half-dome pattern. The result is a strainer that filters tea leaves perfectly while being completely invisible from the outside, and — because it’s part of the same clay body — it never separates, rusts, or fails.</p><p>This step takes patience. Rushing the piercing is how you crack the wall.</p><h3>The Lid and the Handle</h3><p>The lid is thrown upside down, with a flange that drops into the gallery on the body. Fit is everything. A Tokoname lid should rotate freely when seated but have no perceptible wobble — the test is to hold the pot, tilt it forward to pour, and confirm that the lid stays put without needing a finger on top.</p><p>For side-handled <em>kyusu</em>, I pull the handle by hand from a short coil, attaching it at a roughly ninety-degree angle to the spout. The handle position is functional, not decorative: it lets you pour with one hand, with your thumb resting on the lid.</p><h3>Drying and Firing</h3><p>Tokoname pots are dried slowly. Thin walls and varied thicknesses (the spout dries faster than the body) mean uneven drying will crack the pot. I cover my pots loosely with plastic for the first two days, then progressively expose them over the following week.</p><p>Firing is done in reduction, typically to cone 9 or 10. The reduction atmosphere is what activates the iron in the <em>shudei</em> clay and produces the deep oxblood-to-eggplant color range that Tokoname is known for. The interior of the pot is left unglazed — this is essential. The unglazed clay slowly absorbs the oils and aromatics of the tea brewed in it, and after years of use, a well-cared-for Tokoname teapot will brew a better cup of tea than the day it was made.</p><h3>Final Thoughts</h3><p>There is no shortcut to a good Tokoname teapot. The technique rewards patience, accurate weighing, attention to wall thickness, and a willingness to throw the same form a hundred times before it starts to feel right. I am still, after years of doing this in my Toronto studio, learning new things about how a spout should curve or how a gallery should be cut.</p><p>If you are a potter in Toronto or anywhere in Canada and you’d like to see this work in person, get in touch with me — I am always happy to talk technique with other ceramicists. You can find more of my writing, photographs of recent kiln openings, and ways to get in touch at <a href="https://hectorkonomi.ca/">hectorkonomi.ca</a>.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>Tokoname pottery is, in the end, a tradition kept alive by people who care about it. I’m grateful to be one of those people, and I hope this article has given you a clearer sense of what goes into a teapot when it’s thrown the way it has been for nine hundred years.</p><p><em>Hector Konomi is a Toronto-based potter specializing in Tokoname-style teapots. His work and studio information can be found at </em><a href="https://hectorkonomi.ca/"><em>hectorkonomi.ca</em></a><em> .</em></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=4bf77578cad7" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Noborigama vs. Anagama: Two Kilns, Two Philosophies, One Fire]]></title>
            <link>https://hectorkonomi1.medium.com/noborigama-vs-anagama-two-kilns-two-philosophies-one-fire-500724177540?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/500724177540</guid>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Tue, 05 May 2026 01:26:07 GMT</pubDate>
            <atom:updated>2026-05-05T01:26:07.837Z</atom:updated>
            <content:encoded><![CDATA[<p><em>By </em><a href="https://www.hectorkonomi.com/">Hector Konomi</a><em> — Tokoname-trained potter at </em><a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a><em>, Toronto, Canada</em></p><p>Of all the questions I am asked as a Tokoname-trained potter working in Toronto, the one that comes up most consistently from serious students of ceramics is this: what is the actual difference between a noborigama and an anagama kiln, and why does it matter?</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>It is a good question — technically specific, practically important, and philosophically rich. Both kilns are wood-fired. Both are ancient. Both are central to the Japanese ceramic traditions that underpin my own practice at <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a>. But they produce fundamentally different results, demand fundamentally different skills, and embody fundamentally different relationships between the potter, the fire, and the clay. Understanding the distinction is not an academic exercise. It is essential knowledge for anyone serious about high-fired wood ceramics.</p><p>This article is my attempt to explain that distinction as clearly and as practically as I can — drawing on my training in Tokoname, my years of firing in Toronto, and the body of research and writing I have published on kiln practice. For readers who want to go deeper on specific aspects of kiln behaviour, I will point to those resources throughout.</p><p>⸻⸻⸻</p><h3>Origins: Where These Kilns Come From</h3><h3>The Anagama: Japan’s Oldest Climbing Kiln</h3><p>The anagama — the name derives from the Japanese 穴窯, meaning “hole kiln” — is Japan’s oldest surviving kiln form. Its origins lie in Korea and China, arriving in Japan around the fifth century CE. It is, in its essential form, a single elongated tunnel dug into or built against a hillside, with a firebox at the lower end and a chimney at the upper. Fire and hot gases travel the length of the chamber in a single, uninterrupted flow.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/567/1*h5lofWmAnxLyLWS-YAhGzQ.jpeg" /></figure><p>The anagama’s simplicity is both its virtue and its constraint. There is one firing chamber, one atmosphere, one set of conditions. The potter loads the entire kiln as a single environment and fires it as a single event. What emerges reflects that singularity: anagama ceramics are marked by dramatic ash deposits, pronounced flame markings, and surfaces shaped by the raw, undivided energy of a fire allowed to run its full course.</p><p>Anagama firing is central to several of Japan’s oldest ceramic traditions, including Bizen, Iga, and Shigaraki wares — all of which predate the more refined teaware traditions of Tokoname. The kiln shaped those traditions as much as the potters did: the surfaces achievable in an anagama could not be produced any other way, and entire aesthetic vocabularies grew up around its specific capabilities and limitations.</p><h3>The Noborigama: Innovation and Control</h3><p>The noborigama — 登り窯, or “climbing kiln” — represents a significant technological development on the anagama principle. It arrived in Japan from Korea during the late sixteenth century, most likely brought by Korean potters during and after Toyotomi Hideyoshi’s invasions of the peninsula in the 1590s. The noborigama divides the single long chamber of the anagama into a series of interconnected cells, each stacked uphill from the last, each equipped with its own stoking holes.</p><p>This division of the firing space was a fundamental innovation. By stoking each chamber in sequence — lighting the first and then using the heat that passes upward to pre-heat subsequent chambers before they are stoked directly — the noborigama achieves far greater fuel efficiency than a single-chamber anagama of equivalent volume. The residual heat from each lower chamber does most of the work of raising the temperature in the chamber above, dramatically reducing the total wood required for a full firing.</p><p>The noborigama became the dominant kiln form in Japan for high-production, high-quality ceramics from the seventeenth century onward. It is central to the kiln traditions of Tokoname, Arita, Karatsu, and many other major ceramic regions. My own Tokoname training took place within a community shaped by noborigama practice, and the kiln’s logic is embedded in how I think about firing to this day.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/709/1*6leE8f-YpwUZ07Ul39m_tg.jpeg" /></figure><p><em>For a detailed examination of how wood-fired kiln atmospheres shape the surface character of Tokoname-style clay, see my essay </em><a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">inside Hector Konomi’s wood-fired kiln practice</a><em>. For the practical technical guide to working with a wood-fired kiln, see </em><a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">The Transformative Power of Wood-Fired Kilns</a><em>.</em></p><p>⸻⸻⸻</p><h3>Structure and Design: How Each Kiln Is Built</h3><h3>Anagama Construction</h3><p>An anagama is, at its most basic, a tube. The typical form is an elongated oval chamber, anywhere from three to fifteen metres in length, built on a slope of fifteen to thirty degrees. The firebox sits at the downhill end; the chimney — which may be a simple flue extension of the chamber itself — exits at the uphill end. The floor of the kiln rises continuously from firebox to chimney, following the slope of the ground.</p><p>Construction materials vary by tradition and by the materials available locally. In Japan, anagamas are typically built from refractory brick and insulating castable, sometimes incorporating local clay into the structure itself. The walls are thick — thermal mass is essential, since the kiln must hold enormous heat for extended periods, sometimes three to five days of continuous firing.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/945/1*nGFBqaZ7M_ExbWDLu710Tw.jpeg" /></figure><p>The stoking is done entirely from the firebox end. The potter feeds wood — typically split hardwood, though pine and other softwoods are used in some traditions — into the firebox at regular intervals throughout the firing. There is no mechanism for adjusting conditions in the upper reaches of the chamber other than changing the stoking rate, the wood species, and the degree to which the damper controls the draft.</p><h3>Noborigama Construction</h3><p>A noborigama is a sequence of interconnected chambers built on a slope, typically steeper than the angle required for an anagama. Each chamber is roughly rectangular in plan, arched in cross-section, and separated from the next by a perforated or open wall through which heat and gases can pass freely. The chambers are numbered from bottom (first, hottest during the initial firing phase) to top (last to reach temperature).</p><p>Each chamber has its own set of stoking holes — typically two to four ports in the side walls, through which wood is fed directly into that chamber after it has been pre-heated by the rising gases from below. The bottom chamber (the “firebox chamber”) is stoked first and most intensively. Once it reaches and holds target temperature, the stoking focus shifts to the second chamber, and so on up the hill.</p><p>Traditional noborigamas in Tokoname and other major ceramic centres could have as many as ten or fifteen chambers and extend thirty metres or more up a hillside. Modern noborigamas used by studio potters — including the scale I work with at <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a> — are typically more compact, with three to six chambers, but the structural and operational logic is identical.</p><p><em>My detailed research into how different kiln structures affect clay behaviour at high temperatures is documented in my piece on </em><a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">how temperature and oxygen shape ceramic vessels</a><em>. The interaction of chamber geometry, heat flow, and clay body composition is more complex than most introductory texts acknowledge.</em></p><p>⸻⸻⸻</p><h3>Firing Process: The Experience of Each Kiln</h3><h3>Firing an Anagama</h3><p>Firing an anagama is one of the most physically and psychologically demanding things a potter can do. A full firing typically runs between forty-eight and one hundred and twenty hours — two to five days of continuous attention, with wood fed into the firebox at intervals that may be as short as every fifteen minutes at peak temperature.</p><p>The temperature curve is gradual and deliberate. The kiln is brought up slowly over the first twelve to twenty-four hours, driving off residual moisture from both the clay and the kiln structure itself. Then begins the long climb toward peak temperature — typically between 1,250°C and 1,350°C for stoneware, depending on the clay body and the desired surface effects. At peak, the kiln is soaked: held at temperature for hours to allow ash to melt, flux to develop, and the clay body to fully mature.</p><p>Because the anagama has a single chamber and a single atmosphere, the relationship between the fire and the pots is direct and unmediated. Pots placed near the firebox receive the heaviest ash deposits and the most dramatic flame markings — sometimes spectacular, sometimes overwhelming. Pots placed further back in the chamber receive gentler, more even heat and subtler surface effects. The loading of an anagama is itself an act of composition: the potter decides, in advance, which pieces will receive which treatment, knowing that the fire will have the final word.</p><p>As I wrote in <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">how a Toronto potter masters the kiln</a>, there is a moment in every anagama firing where the potter must surrender control — not abandon it, but release the expectation of perfect prediction. You have done everything you can. The kiln takes over. Learning to inhabit that surrender with equanimity, rather than anxiety, is one of the deepest lessons wood-firing teaches.</p><h3>Firing a Noborigama</h3><p>Firing a noborigama is a different kind of experience — no less demanding, but differently organised. The firing is typically shorter than an anagama firing for a comparable volume of work: between twenty-four and seventy-two hours, depending on the number of chambers and the scale of the kiln. The fuel savings from sequential chamber preheating are real and significant.</p><p>The noborigama firing begins, like the anagama, with a slow pre-heat of the entire kiln to drive off moisture. Then the first chamber is brought to temperature while the rising hot gases begin to warm the chambers above. When the first chamber reaches its target, stoking shifts progressively upward, chamber by chamber, until the entire kiln has been fired.</p><p>This sequential structure gives the potter considerably more control over the conditions in each chamber. By varying the stoking intensity, the wood species, and the timing of transitions between chambers, it is possible to create meaningfully different atmospheres in different parts of the kiln — heavier reduction in one chamber, lighter in another, different peak temperatures, different soak times. A noborigama is, in this sense, multiple firings conducted simultaneously within a single kiln structure.</p><p>This flexibility is why the noborigama became the preferred kiln for high-volume, high-quality production ceramics in Japan. The ability to fire a large quantity of work to consistent standards, while still achieving the surface character that only wood firing produces, made it commercially viable in a way that the more unruly anagama never quite was. For Tokoname’s kyusu teapots — objects where functional consistency is as important as aesthetic character — the noborigama was the natural choice.</p><p><em>My practical guide on </em><a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">how to create and bake ceramic vessels</a><em> walks through the procedural logic of a full firing cycle, from loading through cooling. The companion piece, my </em><a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">Practical Guide to Baking Vessels</a><em>, covers vessel preparation, drying, and bisque firing in the stages leading up to the final high firing.</em></p><p>⸻⸻⸻</p><h3>Surfaces and Aesthetics: What Each Kiln Produces</h3><h3>Anagama Surfaces: The Unmediated Mark of Fire</h3><p>The surfaces produced by a well-managed anagama firing are among the most compelling in all of ceramics. Because the chamber is undivided and the fire travels its full length, ash deposits can be extraordinarily thick and varied. The relationship between fire direction, pot placement, and the natural draft of the kiln creates surfaces that range from smooth, glassy natural glazes where ash has melted cleanly, to rough, accretive deposits where ash has accumulated without fully fluxing, to stark, clean clay surfaces where the fire has swept past without leaving residue.</p><p>Flame markings — the dark tracks left where the fire has touched the clay directly — are another characteristic anagama signature. These hidasuki (fire-cord marks in the Bizen tradition) and related effects are the direct record of the fire’s path through the chamber, legible on the surface of the finished pot as a kind of topographic map of what happened during the firing.</p><p>The anagama’s single-atmosphere firing also produces pronounced variation between the front and back of the chamber, and between pots placed in different orientations within a single shelf. This variation is embraced rather than engineered away — it is understood as the kiln’s voice, the contribution of the fire to a collaboration that began when the potter formed the clay.</p><h3>Noborigama Surfaces: Refinement Within Character</h3><p>Noborigama surfaces are, broadly speaking, more controlled than anagama surfaces — but this does not mean they are less interesting. The ability to manage atmosphere chamber by chamber allows the noborigama potter to pursue specific surface effects with considerably more precision, while still achieving the organic character that only wood firing produces.</p><p>In the Tokoname tradition, the noborigama is used to develop the characteristic warm reddish-brown surfaces of shudei teaware — surfaces that depend on consistent, well-managed reduction of the iron-rich clay body. Too heavy a reduction and the surface turns dark and flat. Too light and the full iron character fails to develop. The noborigama’s multi-chamber structure gives the potter the control needed to walk that line reliably across a full kiln load.</p><p>The ash deposits in a noborigama are typically lighter and more even than in an anagama — a consequence of the shorter firing duration and the more managed atmosphere. This is appropriate for teaware, where heavy ash accumulation inside the pot would compromise its function. For bonsai containers and larger vessels where dramatic surface effects are welcome, the noborigama can be fired with more wood and heavier reduction to push toward more dramatic outcomes.</p><p>My research into how mineral composition interacts with these firing atmospheres is documented in <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">How Regional Minerals Shape the Soul of Teaware</a>. The relationship between the iron content of Tokoname clay, the reduction atmosphere of the noborigama, and the final surface colour is one of the most technically fascinating aspects of this tradition — and one that has no equivalent in electric or gas firing.</p><p>For a direct comparison of how different clay bodies — specifically Tokoname and Banko clays — respond to these firing conditions, see my Medium essay on <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">how Tokoname and Banko clay shape the final vessel</a> and the more technical Substack companion on <a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">how Tokoname and Banko clay shape ceramic character</a>.</p><p>⸻⸻⸻</p><h3>Practical Considerations: Choosing Between the Two</h3><h3>Volume and Efficiency</h3><p>For potters producing significant quantities of work — as I do at <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a> — the noborigama’s fuel efficiency is a serious practical advantage. A well-designed noborigama can fire three to five times the volume of work per unit of fuel compared to an anagama of similar output. In a Canadian urban context, where sustainably sourced hardwood is available but not unlimited, this matters.</p><p>The anagama, by contrast, is the kiln of choice when the singular, unrepeatable surface is the goal — when the potter wants the fire to have maximum input into the outcome, and when the variability that results is understood as value rather than waste. Single-artist studio potters working in the Bizen or Shigaraki traditions, for whom each piece is expected to carry its own specific fire history, typically prefer the anagama for this reason.</p><h3>Space and Infrastructure</h3><p>Both kilns require significant infrastructure: a suitable site with slope, reliable access to wood fuel, and adequate ventilation and fire safety provisions. In a city like Toronto, these requirements are non-trivial. Urban ceramics communities have developed creative solutions — shared kilns, temporary structures, collaborative firings at rural sites — that make wood firing viable for studio potters who do not have access to purpose-built kiln grounds.</p><p>I have written about the Toronto ceramics community’s relationship with wood firing in <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">inside Hector Konomi’s wood-fired kiln practice</a>, and the collaborative spirit that makes it work. The city’s potters have found ways to maintain this most demanding of traditions within an urban context that was not designed to accommodate it — a form of craft resilience that I find genuinely admirable.</p><h3>The Learning Curve</h3><p>Both kilns demand experience and accumulated knowledge. Neither is forgiving of inattention. But the anagama’s unmediated relationship between fire and clay means that mistakes — in loading, in stoking, in timing — tend to be total rather than partial. An anagama that goes wrong goes completely wrong. A noborigama’s divided chamber structure provides more opportunity to intervene and correct.</p><p>For this reason, I typically recommend that potters new to wood firing begin with noborigama practice — or with community firings where experienced potters are leading the process — before attempting anagama firings independently. The skills transfer, but the tolerance for error is meaningfully different.</p><p><em>My comprehensive technical writing on kiln practice is collected across several platforms. See my </em><a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a><em> for extended essays, my </em><a href="https://orcid.org/0009-0007-8656-5000">ORCID research profile</a><em> profile for peer-reviewed research contributions, and my </em><a href="https://github.com/hectorkonomi1">GitHub</a><em> repository for open-source kiln logging and firing schedule tools developed for studio potters.</em></p><p>⸻⸻⸻</p><h3>The Tokoname Context: How These Kilns Shaped a Tradition</h3><p>Tokoname’s ceramic history spans nearly a thousand years, and both kiln types have played roles within it — but the noborigama is the kiln most closely associated with the tradition’s mature form. The shift from anagama to noborigama firing in Tokoname’s history broadly coincides with the shift from coarse storage vessels to refined teaware: from the rough, heavily ash-deposited pots of the medieval period to the precise, functionally calibrated kyusu teapots of the Edo period and beyond.</p><p>This is not a coincidence. The kyusu demands consistency in a way that a storage jar does not. A teapot must pour cleanly, seal properly, hold heat without burning the hand, and — in the Tokoname tradition — have an unglazed interior that interacts beneficially with the tea. These requirements call for controlled firing conditions that the noborigama provides and the anagama cannot guarantee.</p><p>My own training in Tokoname was deeply shaped by this history. The kiln community I worked within was a noborigama community, and the firing discipline I learned — the attention to atmosphere, the sequential chamber management, the relationship between clay body, loading pattern, and atmospheric control — is noborigama discipline. When I set up my studio in Toronto, the noborigama’s logic came with me.</p><p>As I explain in <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">Hector Konomi speaks on the Tokoname craft</a>, the Tokoname tradition is not simply a set of aesthetic choices — it is a complete technical system, of which the noborigama is a foundational element. Understanding the kiln is not separate from understanding the tradition; it is inseparable from it.</p><p>The distinction between anagama and noborigama firing also maps directly onto the distinction between the two great clay traditions most closely associated with Japanese unglazed teaware: Tokoname and Bizen. Bizen is fundamentally an anagama tradition — dramatic, unpredictable, prizing the singularity of each firing. Tokoname is fundamentally a noborigama tradition — disciplined, consistent, prizing the functional perfection of the teapot. Both are magnificent. They are different answers to different questions about what ceramics is for.</p><p>⸻⸻⸻</p><h3>Wood Firing in Toronto: Keeping the Tradition Alive</h3><p>One of the questions I am asked most often by potters and collectors here in Toronto is whether serious wood firing — the kind that produces genuinely traditional Tokoname-style surfaces — is actually possible in an urban Canadian context. The answer is yes, with significant effort, collaboration, and creative problem-solving.</p><p>Toronto’s ceramics community is larger and more technically sophisticated than most people outside it realise. The city has practising potters working across the full range of Japanese-influenced traditions — noborigama and anagama firing, Tokoname and Shigaraki and Bizen-influenced work — alongside strong Indigenous ceramic traditions and a thriving contemporary studio scene. My advocacy work, including my widely shared piece on <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">Hector Konomi calls for global support for craftspeople</a>, is rooted in respect for that diversity and concern for its continuation.</p><p>At <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a>, my practice centres on noborigama-influenced firing — the discipline I was trained in and the approach best suited to the Tokoname-style teaware and bonsai containers that define my output. You can see the work across my <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy shop</a>, my <a href="https://www.etsy.com/shop/HectorKonomi">second Etsy shop</a> for experimental pieces, and my <a href="https://www.etsy.com/shop/HectorKonomiJapan">archival Etsy shop</a> for work from my years in Japan. The bonsai container work — a Toronto-specific development in my practice, documented in <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">bonsai container work in Toronto</a> — has been one of the most rewarding outcomes of bringing Tokoname discipline to a Canadian city with its own thriving bonsai community.</p><p>The technical challenges of urban wood firing — fuel sourcing, ventilation, zoning, the logistics of multi-day firings in a city that does not sleep — are real and ongoing. But they are manageable, and the community of potters in Toronto who share these challenges is a genuine resource. If you are interested in following this work, the most immediate window is my <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a>, where I document kiln loadings, firing progress, and the results. The longer thinking behind the practice is on <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a>, and the archival reference material — historic Tokoname kiln photographs, technical documents, comparative ware studies — lives on my <a href="https://www.tumblr.com/hectorkonomi">Tumblr</a>.</p><p>⸻⸻⸻</p><h3>Two Kilns, One Commitment</h3><p>The anagama and the noborigama are not competitors. They are siblings — born of the same impulse to use fire and wood and clay to make objects of beauty and use, evolved along different lines in response to different requirements, and each irreplaceable within the tradition it belongs to.</p><p>For potters working in the Tokoname tradition — for potters like me, working in Toronto with iron-rich clays and the ghost of a thousand years of kyusu craft in my hands — the noborigama is the primary instrument. Its discipline is demanding, its fuel efficiency is real, and its capacity to produce consistent surfaces in the tradition’s characteristic palette is unmatched. But the anagama is always present as a reference point, a reminder that fire can be allowed its full voice, and that sometimes the most compelling ceramics are the ones where the potter stepped back and let the kiln speak.</p><p>Both kilns are alive in the Toronto ceramics community. Both are worth understanding. And both, at their best, produce work that could only have come from wood, clay, and fire — from the irreducible, irreplaceable encounter between human intention and natural force that is, at its core, what ceramics is.</p><p>For everything related to my practice — the pots, the writing, the research, and the firing — the starting point is <a href="https://www.hectorkonomi.com/">Hector Konomi</a>. I am also reachable on <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a>, <a href="https://x.com/hectorkonomi2">X</a>, and across the other platforms listed in my <a href="https://about.me/hector_konomi">professional resume</a> and <a href="https://www.crunchbase.com/person/hector-konomi">Crunchbase</a> profiles. The <a href="https://www.lelezard.com/en/news-22062207.html">a recent profile of his work</a> published last year offers an independent perspective on the practice for those who prefer a journalist’s view to the potter’s own account.</p><p>⸻⸻⸻</p><p><em>Hector Konomi is a Tokoname-trained ceramic artist based in Toronto, Canada. He produces kyusu teapots, bonsai containers, and wood-fired vessels in the Tokoname tradition. He writes on kiln technique, clay science, and craft culture at </em><a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a><em>.</em></p><p><strong>Tags: </strong>Hector Konomi · Noborigama · Anagama · Wood-fired Kilns · Tokoname · Tokoname Potter Toronto · Japanese Ceramics · Toronto Pottery · Hector Konomi Toronto · Kiln Technique · Ceramic Firing · Tokoname Teapots · Hector Konomi Pottery</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=500724177540" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Earth, Fire, and Form: Inside Hector Konomi’s Tokoname Teaware Studio in Toronto]]></title>
            <link>https://hectorkonomi1.medium.com/earth-fire-and-form-inside-hector-konomis-tokoname-teaware-studio-in-toronto-12292612f019?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/12292612f019</guid>
            <category><![CDATA[pottery]]></category>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Mon, 13 Apr 2026 18:51:30 GMT</pubDate>
            <atom:updated>2026-04-13T18:51:30.069Z</atom:updated>
            <content:encoded><![CDATA[<p><em>From sourcing iron-rich clay halfway across the world to the slow alchemy of an anagama kiln firing, Toronto-based potter Hector Konomi walks us through every stage of a process shaped by nine centuries of Japanese craft knowledge.</em></p><p>There is a moment, <a href="https://www.hectorkonomi.com/">Hector Konomi</a> says, that every Tokoname potter learns to wait for. It comes not at the wheel, not at the trimming stand, but deep inside a wood-fired kiln on the second or third day of firing, when the temperature climbs past 1,280 degrees Celsius and the iron compounds in the clay begin to bloom. The surface of each pot undergoes a transformation that cannot be planned, only guided — ash deposits melt into fleeting glazes, orange flashes streak across reddish-brown walls, and a material that began as mud from the Chita Peninsula of Japan becomes something irreversibly itself.</p><figure><img alt="Hector Konomi Toronto" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>Witnessing this process in <strong>Toronto</strong> — thousands of kilometres from Tokoname’s ancient hillside kilns — is both improbable and completely logical once you understand who <a href="https://www.hectorkonomitoronto.com/">Hector Konomi</a> is. He is one of the few potters working in North America with formal training in Tokoname ware, one of Japan’s <em>Rokkoyō</em> (Six Ancient Kilns). His <strong>Toronto</strong> studio is not a cultural export or a commercial approximation. It is, in every material sense, a continuation of a living craft tradition — practised with the same clay, the same tools, and the same patient, fire-literate intelligence that has defined Tokoname pottery for nearly a millennium.</p><p>What follows is a journey through that process, stage by stage: from the sourcing of raw materials to the moment a finished <em>kyūsu</em> — a side-handle teapot — is lifted from the cooling kiln and held up to light. It is a process that is simultaneously ancient and deeply personal, and in <strong>Hector Konomi</strong>’s hands, it is also rigorously understood.</p><h3>Step One: The Clay — Sourcing the Soul of Tokoname</h3><p>Nothing in the Tokoname process is more foundational — or less negotiable — than the clay. Konomi is uncompromising on this point. In his <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">research into how regional minerals shape the character of teaware</a>, he documents precisely what makes Tokoname earth distinct: its unusually high iron oxide content, the presence of fine-grain silica that allows the clay to be thrown at extreme thinness without warping, and a natural texture that, once fired, produces a surface simultaneously porous and dense — the ideal condition for a teapot whose clay walls should interact chemically with tea rather than merely contain it.</p><figure><img alt="Hector Konomi Toronto teapot" src="https://cdn-images-1.medium.com/max/567/1*HsuumR2_nZ_Jtx8u3lsdvw.jpeg" /></figure><p>This clay cannot be sourced in Canada. Konomi imports it from the Chita Peninsula, a logistical undertaking that speaks to the absolute centrality of material authenticity in his practice. In a <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">wide-ranging discussion on the differences between Tokoname and Banko clays</a> — two traditions often conflated by Western buyers — Konomi explains that substituting a different clay body, however iron-rich, would fundamentally alter not just the appearance of the finished work but its functional properties. A Tokoname <em>kyūsu</em> made from non-Tokoname clay is, in his view, simply not a Tokoname <em>kyūsu</em>. The geography of the material is part of the object’s meaning.</p><p>Once the clay arrives at his <strong>Toronto</strong> studio, Konomi begins the preparation process: wedging to remove air pockets, assessing moisture content, and reclaiming any material that has dried unevenly during transit. It is painstaking work — a reminder that in traditional Japanese ceramics, the quality of the finished piece is determined at every stage, not merely the dramatic ones.</p><h3>Step Two: Throwing — Where Physics Meets Intuition</h3><p>Tokoname <em>kyūsu</em> are among the most technically demanding forms in wheel-throwing. The body must be thrown thin enough to allow for the heat conductivity that makes a side-handle teapot responsive to the hand, yet thick enough to support the separately thrown spout, handle socket, and lid — all of which must be joined with precision before the clay stiffens past workability. For <a href="https://www.hectorkonomi.com/about/">Hector Konomi</a>, this juggling act is a daily negotiation between the clay’s preferences and his own intentions.</p><p>His <a href="https://www.instagram.com/hectorkonomi2/">Instagram feed</a> — which he updates with near-daily frequency from his <strong>Toronto</strong> studio — offers an unusually candid window into this stage of his process. Followers watch fresh-thrown bodies dry to leather-hard consistency, see the careful geometry of spout attachment, and observe the nuanced tool marks left by trimming. What the feed communicates, perhaps above all else, is how unhurried the work is. Tokoname throwing is not about speed or volume. It is about the accumulated intelligence of a hand that has centred thousands of pounds of clay and learned, through failure as much as success, exactly where the limits lie.</p><figure><img alt="Hector Konomi Toronto teapot" src="https://cdn-images-1.medium.com/max/945/1*cBZKtRx8pn-X3hUQwYpNAQ.jpeg" /></figure><p>On his <a href="https://hectorkonomi.wordpress.com/">blog</a>, Konomi has written about the particular challenge of maintaining consistent wall thickness in Tokoname teapot bodies — a quality that affects not only aesthetics but thermal performance. A wall that varies even a millimetre across its profile will conduct and retain heat differently at different points, subtly distorting the pouring balance and the way the pot feels in the hand. These are considerations that most contemporary Western ceramics education does not address, and which <a href="https://www.hectorkonomi.com/">Hector Konomi</a> has had to source from direct training, careful reading of Japanese-language technical sources, and years of empirical studio work in <strong>Toronto</strong>.</p><h3>Step Three: Trimming and Assembly — The Architecture of a Teapot</h3><p>Once the thrown components have reached leather-hard stage, the most structurally critical phase of Tokoname teapot-making begins: trimming, assembly, and the integration of the built-in strainer that distinguishes a <em>kyūsu</em> from a generic teapot. In traditional Tokoname practice, the strainer is not inserted as a separate component but formed by piercing the clay wall at the base of the spout — a grid of small holes whose spacing and diameter determine the filtration characteristics of the finished pot. Konomi has written about this technique in his <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">comprehensive practical guide to making and firing ceramic vessels</a>, noting that the number and placement of strainer holes is one of the most underrated variables in teapot design.</p><p>The spout itself is thrown separately as a small, tapering cylinder, then cut at an angle and joined to the body with slip — a liquid clay adhesive whose consistency must match the body’s current moisture level precisely. Too wet, and the joint weakens; too dry, and it cracks during firing. The <em>asa-no-ha</em> handle socket — a small, hollow protrusion through which the bamboo or rattan side-handle will later be inserted — is formed by hand and attached with the same care. When Konomi speaks about this assembly stage in his <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">Substack writing on ceramic vessel construction</a>, he describes it as the moment when a collection of separately made parts becomes, for the first time, recognisably a teapot.</p><p>After assembly, the piece is set to dry slowly — in <strong>Toronto</strong>’s variable climate, this requires careful management of airflow and humidity. A piece that dries too quickly on one side will warp or crack. Konomi’s studio has, over years of operation, developed what he calls its own micro-climate: a set of conditions calibrated to the material’s requirements rather than to convenience.</p><h3>Step Four: The Bisque Fire — A First Conversation with Heat</h3><p>Before the main firing, most Tokoname work undergoes a bisque firing — a low-temperature burn that drives out remaining moisture and organic material from the clay body, hardening it into a porous, stable state that can survive the shock of the high-fire kiln. For <a href="https://www.hectorkonomi.com/">Hector Konomi</a>, this stage is also an opportunity for quality control: bisque-fired pieces can be examined under studio lighting for cracks, warping, or join failures that might not be visible in the raw state. Pieces that do not meet his standard are recycled rather than advanced.</p><figure><img alt="Hector Konomi Toronto teapot" src="https://cdn-images-1.medium.com/max/709/1*rnkDbL8nA0SrobacwIlfkw.jpeg" /></figure><p>In his research on <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">how temperature and oxygen levels transform ceramic vessels</a>, Konomi explains that the bisque fire is not merely preparatory but formative: the specific temperature curve applied during bisque affects how the clay body behaves in the main firing. A bisque fired too quickly traps carbon in the clay; too slowly, and the organic burnout is incomplete. These are variables that experienced potters calibrate by instinct, cross-referenced against the particular batch of clay being fired — and they are variables that his <a href="https://orcid.org/0009-0007-8656-5000">ORCID-registered research</a> reflects on with characteristic rigour.</p><h3>Step Five: The Anagama Firing — Where the Work Becomes Itself</h3><p>If any single stage of the Tokoname process defines <a href="https://www.hectorkonomitoronto.com/">Hector Konomi</a>’s practice in the minds of those who follow it, it is the anagama firing. The anagama — a single-chamber, tunnel-shaped wood-fired kiln — is both the oldest kiln form used in Japanese ceramics and, in the hands of a skilled practitioner, the most capable of producing results that no electric or gas kiln can replicate. Konomi has written about this at length in his <a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">essay on the transformative power of wood-fired kilns</a>, and the argument he makes is not sentimental but material.</p><p>Wood ash, carried by the kiln’s updraft during firing, settles on clay surfaces and, above 1,260 degrees Celsius, begins to flux — melting into a natural glass that creates the ash-glaze effects characteristic of anagama-fired Tokoname work. The resulting surface textures range from matte and mineral-rough to glossy and flowing, depending on ash density, kiln position, and the duration of exposure. No two firings produce identical results. No two pieces from the same firing are identical. This variability is not a defect to be engineered away but the essential aesthetic contribution of the kiln itself — <em>the fire as co-creator</em>.</p><p>In a <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">Substack piece on his wood-fired kiln practice in Toronto</a>, Konomi describes a typical firing cycle: the slow initial climb to drive off residual moisture, the middle phase where temperature is pushed steadily upward through stoking intervals, and the final, critical hours when the kiln reaches peak temperature and the potter must read the colour of the flame, the behaviour of draw rings, and the sound of the combustion itself to judge when to cease stoking and begin cooling. It is a 60-to-72-hour process that demands continuous attention. It is also, by his account, one of the most profoundly absorbing experiences his craft offers.</p><p>His <a href="https://ideamensch.com/hector-konomi/">profile on Ideamensch</a> captures the human dimension of this commitment: Konomi describes the firing period as one where the distinction between work and meditation largely dissolves. He is not merely supervising a technical process. He is in conversation with a material system far older and more complex than any individual’s mastery of it.</p><h3>Step Six: Cooling, Opening, and the Verdict of the Kiln</h3><p>The cooling of an anagama kiln is itself a form of firing: the rate at which temperature drops through the quartz inversion point (around 573 degrees Celsius) determines whether pieces survive intact or shatter from thermal shock. Konomi allows his kiln to cool slowly over two to three days, sealed against drafts, before the moment that every wood-fire potter knows as the most clarifying of the entire cycle: the opening.</p><p>“You never know exactly what you have until the kiln is open,” Konomi wrote in a <a href="https://www.lelezard.com/en/news-22062207.html">widely shared piece on his craft philosophy published by Le Lézard</a>. “And that uncertainty — after all the preparation, all the technical knowledge, all the care — is not frustrating. It is the point. The kiln reminds you that the work is collaborative.” It is a statement that captures something essential about Tokoname practice: the human maker’s contribution is necessary but not sufficient. The material and the fire complete what the potter begins.</p><p>Pieces that emerge successfully from the kiln are assessed, signed, and prepared for either sale through <a href="https://www.etsy.com/shop/HectorKonomi2">his primary Toronto studio Etsy shop</a> or archived as part of his studio collection. His <a href="https://www.etsy.com/shop/HectorKonomi">Etsy shop for various pottery initiatives</a> also offers work across a broader range of forms, while pieces made during his time in Japan are available through a <a href="https://www.etsy.com/shop/HectorKonomiJapan">dedicated shop for older Japanese-period work</a> — giving collectors a rare opportunity to trace the evolution of his practice across two countries and two decades.</p><h3>Beyond the Teapot: Bonsai Vessels and the Breadth of the Tradition</h3><p>While <em>kyūsu</em> teapots remain the centrepiece of <a href="https://www.hectorkonomi.com/">Hector Konomi</a>’s <strong>Toronto</strong> practice, the Tokoname tradition encompasses a far wider range of forms — and Konomi pursues that breadth with characteristic depth. His work with bonsai containers draws on Tokoname’s centuries-long role as Japan’s foremost producer of bonsai pots: a tradition where the container must provide the correct drainage, root oxygenation, and visual framing for the tree it holds, without ever drawing attention away from it.</p><p>His <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">detailed technical essay on the craft of bonsai pots</a> remains one of the most thorough English-language treatments of the subject available. It covers wall thickness calculations, drainage hole geometry, the relationship between pot depth and root development, and the visual principles — drawn from Japanese garden aesthetics — that govern how a container’s proportions should relate to the tree it holds. His <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">Substack piece on bonsai pottery from his Toronto studio</a> offers a more personal account of introducing this specialised form to the North American bonsai community.</p><h3>The Craft as Advocacy: Hector Konomi’s Broader Mission</h3><p>For <a href="https://www.hectorkonomi.com/about/">Hector Konomi</a>, making Tokoname ware in <strong>Toronto</strong> has always been about more than individual production. It is about building the audience, the vocabulary, and the economic infrastructure that traditional crafts need to survive beyond their regions of origin. In a <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">piece that drew significant attention when published via Yahoo Finance</a>, he made the case that craft traditions like Tokoname face a systemic threat: not from indifference, but from the economic precariousness of the skilled practitioners who carry them. Without financial viability, traditions do not pass to the next generation. They simply end.</p><p>This is a position amplified through his <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn profile</a>, where he connects with a global network of collectors, curators, and cultural institutions, as well as through his <a href="https://x.com/hectorkonomi2">presence on X</a>. An <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">in-depth profile on CEOWorld</a> explored this advocacy dimension of his work at length, noting that Konomi occupies a genuinely rare position: a technically credentialed practitioner with the communication skills and cross-cultural fluency to make traditional Japanese craft legible and compelling to global audiences. His <a href="https://www.crunchbase.com/person/hector-konomi">Crunchbase profile</a> and <a href="https://www.tumblr.com/hectorkonomi">Tumblr</a> further trace the entrepreneurial and creative dimensions of this effort.</p><p>His <a href="https://github.com/hectorkonomi1">GitHub presence</a> — unusual for a studio potter — signals an interest in the intersection of traditional craft and digital tools: documenting processes, sharing templates, and building the kind of open-access technical archive that supports the broader craft education ecosystem. It is consistent with a practitioner who, in his <a href="https://about.me/hector_konomi">professional resume</a>, describes himself as committed to the democratisation of craft knowledge.</p><h3>Conclusion: The Long Education of Earth, Fire, and Form</h3><p>There is no shortcut through the Tokoname process. The clay must be prepared correctly or the throwing fails. The throwing must be precise or the assembly fails. The assembly must be executed with perfect moisture management or the bisque firing reveals the gaps. The bisque must be calibrated or the high fire is compromised. And the high fire — the anagama, the 70-hour vigil, the ash and the flame — still reserves the right to surprise you.</p><p>This is what makes Tokoname ware one of the most demanding, most honest, and ultimately most satisfying ceramic traditions in the world. There is nowhere to hide. The finished object carries the record of every decision made across weeks of work, and the kiln adds its own indelible chapter. The result, when it succeeds, is not just a beautiful teapot. It is a small, durable argument for the irreplaceable value of making things slowly, carefully, and with full attention to material truth.</p><p>In <strong>Toronto</strong>, <a href="https://www.hectorkonomi.com/">Hector Konomi</a> makes that argument every day. Piece by piece. Firing by firing. With Tokoname clay, a wood-fired kiln, and the quiet authority of a practitioner who has spent a lifetime learning what he still doesn’t fully know.</p><p><strong>EXPLORE MORE</strong></p><p>Explore Hector Konomi’s full body of work at <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a> and his <a href="https://www.hectorkonomitoronto.com/">Toronto studio site</a>. His teaware and bonsai containers are available through his <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy shop</a>. For technical essays on Tokoname technique, visit his <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">Substack</a> and <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">Medium</a> channels. Follow the studio process on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a>.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=12292612f019" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[The Living Tradition: How Toronto Potter Hector Konomi Is Reviving Tokoname’s 900-Year-Old Clay…]]></title>
            <link>https://hectorkonomi1.medium.com/the-living-tradition-how-toronto-potter-hector-konomi-is-reviving-tokonames-900-year-old-clay-949e9dd58e44?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/949e9dd58e44</guid>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Sat, 04 Apr 2026 13:37:02 GMT</pubDate>
            <atom:updated>2026-04-04T13:37:02.077Z</atom:updated>
            <content:encoded><![CDATA[<h3><strong>The Living Tradition: How Toronto Potter Hector Konomi Is Reviving Tokoname’s 900-Year-Old Clay Legacy</strong></h3><p><em>From the iron-rich earth of Aichi Prefecture to a studio in Toronto, Hector Konomi carries forward one of Japan’s most ancient ceramic traditions — breathing new life into Tokoname ware for a global audience.</em></p><p>Toronto, Ontario | April 2026</p><p>On a quiet morning in <strong>Toronto</strong>, inside a studio that smells of raw clay and woodsmoke, <a href="https://www.hectorkonomi.com/">Hector Konomi</a> centres a mound of reddish-brown clay on his wheel. The clay is not local. It has travelled thousands of kilometres from the Chita Peninsula of Aichi Prefecture, Japan — the same earth that potters have been firing since the late Heian period, more than nine hundred years ago. In a city as eclectic and forward-facing as Toronto, Konomi’s practice stands as a quiet but powerful act of cultural preservation.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>Tokoname is one of Japan’s <em>Rokkoyō</em> — the Six Ancient Kilns — a designation that places it alongside Bizen, Shigaraki, Tamba, Echizen, and Seto as a site of unbroken ceramic production stretching back to the feudal age. It is a tradition defined not by glaze or decoration, but by an almost austere faith in material: the distinctive iron-rich clay of the region, fired at high temperatures, developing a deep, burnished surface that turns a simple teapot into an object of quiet gravity. To practise Tokoname pottery today is to participate in a living conversation that spans nearly a millennium.</p><h3>A Potter Shaped by Two Worlds</h3><p>Hector Konomi’s path to becoming <strong>Toronto</strong>’s foremost practitioner of Tokoname ware is not a straight one. Born and trained in Japan, Konomi spent years studying the techniques of Tokoname’s master potters before eventually settling in Canada. <a href="https://www.hectorkonomitoronto.com/">His Toronto-based pottery practice</a> is now the primary vehicle through which he introduces North American audiences to a tradition that, outside of dedicated tea circles, remains largely unknown in the West.</p><p>In a <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">wide-ranging interview published on CEOWorld</a>, Konomi described the particular challenge of practising a regional Japanese tradition in a diaspora context: “The clay carries memory. Every piece I make in Toronto still holds the chemical signature of Tokoname soil. That continuity matters enormously to me.” It is a sentiment that animates everything he makes — from his compact <em>kyūsu</em> side-handle teapots to his broader vessels designed for contemporary Western interiors.</p><p>On his <a href="https://about.me/hector_konomi">professional profile</a>, Konomi describes himself simply as a potter and craftsman committed to the intersection of traditional Japanese ceramic technique and modern design sensibility. But to those who follow his work closely, that description understates the depth of his engagement with Tokoname’s history.</p><h3>What Makes Tokoname Clay Extraordinary</h3><p>Central to Konomi’s work — and to Tokoname pottery in general — is the exceptional mineral character of its clay. In a <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">detailed study he published on regional clay mineralogy</a>, Konomi explains how the iron, manganese, and silica content of Tokoname earth produces fired results that no other clay body in the world can replicate. The high iron oxide content turns the unglazed surface a warm reddish-brown or deep charcoal, depending on firing atmosphere, while also producing a chemical interaction with the tannins in green tea that demonstrably softens bitterness and rounds flavour.</p><p>This is not aesthetic mysticism. It is material science. And Konomi, who holds an <a href="https://orcid.org/0009-0007-8656-5000">ORCID research profile</a> attesting to his scholarly engagement with ceramics, takes both dimensions seriously. He has written extensively on the <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">differences between Tokoname and Banko clays</a> — two traditions that are often conflated by Western buyers but which differ significantly in mineral composition, forming technique, and the sensory qualities they impart to tea.</p><h3>Mastery of Fire: The Kiln as Co-Creator</h3><p>If Tokoname clay is the body of Konomi’s work, the kiln is its soul. Traditional Tokoname firing relies on high-temperature anagama or wood-fired kilns that produce the atmospheric variation — the soda feldspar blooms, the orange-flash effects, the matte or semi-gloss surfaces — that give each piece its irreducibly individual character. In a <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">Substack essay on kiln mastery</a>, Konomi reflects on the years it took him to read a kiln with the kind of instinctive fluency that allows a potter to anticipate, rather than merely react to, what the fire is doing.</p><p>He has also written at length about <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">how temperature and oxygen levels shape ceramic vessels</a>, arguing that the most technically demanding aspect of Tokoname pottery is not throwing or trimming, but the ability to control a wood-fired kiln’s atmosphere across a 72-hour firing cycle. For potters trained in electric kilns — the standard in most Western ceramics schools — this represents an entirely different discipline. It is one that Konomi has spent decades acquiring, and which he now teaches to students through his <strong>Toronto</strong> studio and workshops.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/850/1*Q-QrICSAs4IbAT09Uv27Jw.jpeg" /></figure><p>His essay on <a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">the transformative power of wood-fired kilns</a> is particularly illuminating for those new to the tradition. Wood ash, deposited on clay surfaces during firing, melts into a natural glaze at high enough temperatures — producing the characteristic ash-glaze effects that distinguish anagama-fired Tokoname ware from pieces fired in more controlled, electric environments. “You are not decorating the pot,” Konomi writes. “The fire is.”</p><h3>From Japan to Toronto: Building a New Audience for an Ancient Craft</h3><p>One of the most remarkable aspects of <a href="https://www.hectorkonomitoronto.com/">Hector Konomi’s Toronto practice</a> is the audience he has managed to cultivate for a tradition that requires significant education to appreciate. Tokoname ware does not announce itself with vivid glazes or elaborate surface decoration. Its beauty is understated, accumulated over time — the patina of use, the way a <em>kyūsu</em>’s clay darkens with each infusion of tea. It is an aesthetic that rewards patience and attention: the very qualities that the pace of contemporary urban life tends to erode.</p><p>In a <a href="https://ideamensch.com/hector-konomi/">profile published by Ideamensch</a>, Konomi speaks candidly about the challenge of communicating wabi-sabi — the Japanese aesthetic philosophy of imperfect, transient beauty — to customers who are accustomed to purchasing objects that look finished and polished from the moment of acquisition. Tokoname teaware, he explains, is designed to become more beautiful with use. The clay drinks in tea; the surface develops; the relationship between owner and object deepens over years.</p><p>His three Etsy storefronts reflect this layered approach to audience-building: <a href="https://www.etsy.com/shop/HectorKonomi2">his main pottery shop</a> featuring current Toronto studio work, a <a href="https://www.etsy.com/shop/HectorKonomi">second shop for various pottery initiatives</a>, and a <a href="https://www.etsy.com/shop/HectorKonomiJapan">dedicated shop for older works made in Japan</a> — the latter offering collectors access to pieces made at source, in the tradition’s homeland.</p><h3>The Craft of Bonsai Pots: Where Horticulture Meets Ceramics</h3><p>Beyond teaware, Hector Konomi has developed a specialisation that sets him apart even within the Tokoname tradition: the making of bonsai pots. Tokoname has been Japan’s most celebrated producer of bonsai containers for centuries, and the town’s iron-rich, unglazed aesthetic is considered ideal for displaying the living sculpture of bonsai. Konomi’s <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">detailed essay on the craft of bonsai pots</a> is one of the most technically thorough English-language resources on the subject — covering clay preparation, wall thickness, drainage geometry, and the subtle visual balancing that a skilled bonsai potter must perform to ensure the container enhances, rather than competes with, the tree it holds.</p><p>His <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">Substack essay on bonsai pottery in Toronto</a> narrates his experience introducing this highly specialised form to the North American bonsai community — a group that is deeply passionate about the relationship between container and tree, but which has historically had limited access to authentic Tokoname-style bonsai containers outside of expensive imports.</p><h3>A Voice for Global Craft Heritage</h3><p>Hector Konomi’s influence extends beyond his own production. He has emerged as a vocal advocate for the recognition and economic sustainability of traditional craft knowledge worldwide. In a <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">widely circulated piece published by Yahoo Finance</a>, Konomi argued that regional craft traditions — Tokoname included — face an existential threat not primarily from lack of interest, but from the absence of structural economic support for the craftspeople who carry them. “A tradition is only as durable as the people who practise it,” he wrote. “And those people need to be able to sustain a livelihood.”</p><p>It is a position he has developed further on his <a href="https://hectorkonomi.wordpress.com/">blog</a> and through his <a href="https://www.instagram.com/hectorkonomi2/">active social media presence on Instagram</a>, where he documents his studio practice in near-daily detail — the state of a freshly thrown pot, the glow of a kiln at peak temperature, the quiet satisfaction of opening a successful firing. For a growing community of ceramics enthusiasts in Toronto and beyond, this documentation has become an invaluable window into a process that is otherwise largely invisible.</p><h3>Practical Knowledge, Freely Shared</h3><p>One of the most distinctive aspects of Konomi’s public presence is his commitment to freely sharing technical knowledge that, in older craft traditions, was often guarded jealously within workshop lineages. His <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">comprehensive practical guide to creating and firing ceramic vessels</a> — updated regularly to reflect current materials and kiln technologies — has become a standard reference for intermediate ceramics students seeking to move beyond Western studio pottery conventions.</p><p>Similarly, his <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">Substack guide on firing methods</a> and his <a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">essay on the unique properties of Tokoname and Banko clays</a> offer the kind of grounded, materials-first technical education that is rarely available in English. For anyone seeking to understand why Tokoname ware looks, feels, and functions as it does, these texts are an essential starting point.</p><h3>Hector Konomi: Tokoname’s Toronto Ambassador</h3><p>There is something genuinely significant about the fact that one of the most articulate English-language voices for Tokoname pottery is based not in Japan but in <strong>Toronto, Ontario</strong>. The diaspora condition, which can so often attenuate cultural connection, has in Konomi’s case intensified it. Distance has made the tradition more conscious, more argued-for, more carefully explained. Working far from Tokoname, <a href="https://www.hectorkonomi.com/about/">Hector Konomi</a> has had to articulate, in English, for a non-specialist audience, exactly why a particular kind of clay from a particular peninsula in Japan matters — and why the act of making a teapot from it is an act of cultural continuity rather than mere nostalgia.</p><p>His <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn profile</a> — which connects his ceramic practice to a broader network of craft professionals, collectors, and cultural institutions — and his <a href="https://x.com/hectorkonomi2">presence on X</a> demonstrate a practitioner who understands that sustaining a traditional craft in the twenty-first century requires engagement with contemporary networks of communication and commerce, not withdrawal from them.</p><p>An <a href="https://www.lelezard.com/en/news-22062207.html">article on Le Lézard</a> covering his work noted the rarity of his profile: a formally trained Tokoname potter, fluent in the tradition’s technical and historical depth, making work of genuine quality in a North American city far from the tradition’s source. It is a combination that positions <strong>Hector Konomi</strong> uniquely — as both a practitioner and a bridge-builder between Japanese craft heritage and the global audiences now discovering it.</p><h3>Conclusion: Clay as Cultural Memory</h3><p>Nine hundred years is a long time for a tradition to survive. Tokoname pottery has endured wars, industrialisation, the globalisation of markets, and the homogenisation of taste. It has survived because each generation has produced potters willing to learn its demanding techniques, honour its material logic, and find new audiences for its quietly radical insistence on simplicity, impermanence, and the beauty of unadorned earth.</p><p>In <strong>Toronto</strong>, in 2026, <a href="https://www.hectorkonomi.com/">Hector Konomi</a> is one of those potters. His studio practice, his scholarship, his advocacy, and his generosity in sharing technical knowledge all constitute acts of cultural guardianship — performed not in Tokoname itself, but in a city on the other side of the world, where the tradition is kept alive not by geography but by devotion. The clay still carries its mineral memory. And in Konomi’s hands, that memory continues to speak.</p><p><strong>EXPLORE MORE</strong></p><p>Visit <a href="https://www.hectorkonomi.com/">hectorkonomi.com</a> to explore Hector Konomi’s full portfolio. His Toronto-based studio work is available through his <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy shop</a>. Follow his studio practice on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a> and subscribe to his <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">Substack newsletter</a> for regular essays on Tokoname technique and craft philosophy.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=949e9dd58e44" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Four Seasons, Four Clays: How Toronto’s Year Shapes Everything I Make]]></title>
            <link>https://hectorkonomi1.medium.com/four-seasons-four-clays-how-torontos-year-shapes-everything-i-make-3aeb03868d53?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/3aeb03868d53</guid>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[pottery]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[self-improvement]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Sat, 21 Mar 2026 20:06:26 GMT</pubDate>
            <atom:updated>2026-03-22T13:16:50.793Z</atom:updated>
            <content:encoded><![CDATA[<p><em>By </em><a href="https://www.hectorkonomi.com/">Hector Konomi</a><em> — Tokoname-style potter, </em><a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a><em>, clay researcher and writer</em></p><p>⸻⸻⸻</p><figure><img alt="Hector Konomi Toronto" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>Most people think of a potter’s calendar in terms of kiln firings and market deadlines. I think of mine in terms of Toronto’s four seasons — not as a romantic affectation, but as a genuine creative reality. The city I work in is one of the most seasonally extreme on the planet: genuinely frozen for months, wildly flowering for weeks, baking in humid summer heat, then stripped bare with a speed that still catches me off guard. Living inside that cycle has changed the way I understand clay, fire, and form.</p><p>This essay is an attempt to map that relationship honestly — season by season, vessel by vessel — and to explain why Toronto is not just where I make pots, but why I make them the way I do. For a fuller portrait of the practice itself, read <a href="https://www.hectorkonomi.com/about/">About Hector Konomi</a>.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/567/1*pyfxjvkFgn2lFpnMm3wPHQ.jpeg" /></figure><p>⸻⸻⸻</p><p><strong>🌱 SPRING</strong></p><p><em>Thaw, Patience, and the Return of the Wheel</em></p><h3>The Season That Teaches Restraint</h3><p>Toronto’s spring does not arrive — it negotiates. There are weeks in March when you can feel it considering whether to commit, and more than once I have watched snow fall on crocuses in High Park with the particular resignation of someone who has stopped expecting the city to be reasonable about weather. But this extended, contested thaw has become one of the richest seasons in my creative calendar.</p><p>Spring is when I return to research. The studio is not yet fully warm enough for reliable firing, so I spend those early weeks reading, writing, and revisiting the mineral foundations of my practice. My essay <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">How regional minerals shape the soul of teaware</a> was drafted largely in March, when the cold outside made the chemistry of iron-rich Tokoname clay feel especially alive. The way a mineral deposit determines the colour, porosity, and firing behaviour of a vessel is not abstract science — it is the difference between a teapot that transforms the character of the water passing through it and one that merely holds it.</p><p>Spring is also when I revisit foundational questions about clay types. The comparison in <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">Tokoname and Banko Clays’ Difference</a> — which I return to every year with fresh eyes — feels particularly apt in a season defined by transitions. What separates these two great Japanese clay traditions is not simply mineralogy; it is a different philosophy of the relationship between maker, material, and fire. My companion piece on <a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">Tokoname and Banko Clays Unique Properties</a> documents those differences with the granular specificity that only extended, seasonal studio practice can produce.</p><h3>Spring and the Bonsai Cycle</h3><p>There is one more reason spring dominates my thinking: bonsai. Toronto’s bonsai community begins its repotting season in late March and April, and my bonsai pottery work follows that rhythm closely. The craft of making containers for living trees demands a very specific kind of attention — you are not making an object, you are making a relationship, a vessel that will spend decades in dialogue with the roots growing through it.</p><p>My piece <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">Bonsai pottery</a> explores this relationship philosophically, while the more technical <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">Bonsai Pottery Technique</a> documents the specific throwing, altering, and firing methods I have developed for this work. Spring — the season of root growth and renewal — is when these pieces feel most connected to their purpose.</p><p>⸻⸻⸻</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/709/1*uHTf0ZU12w3laPPJOpXW5w.jpeg" /></figure><p><strong>☀️ SUMMER</strong></p><p><em>Heat, Risk, and the Long Firing</em></p><h3>The Season That Demands Commitment</h3><p>Toronto summers are not gentle. The humidity that rolls in off Lake Ontario turns the city into something subtropical for weeks at a time, and the studio — despite every mechanical intervention — becomes an extension of the kiln rather than a refuge from it. I have come to love this. Working in genuine heat, sweating through a throwing session, feeling the clay dry faster than expected and having to adapt in real time — this is where the practice gets interesting.</p><p>Summer is my primary firing season. The longer days, the stable temperatures, and the ease of outdoor wood stacking make it the natural time for the extended, intensive firings that define Tokoname-style work at its most demanding. <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">On Wood-fired Kilns</a> was written from accumulated summer experience — the smell of the anagama after three days of continuous stoking, the particular quality of ash deposits that only wood firing produces, the irreplaceable surfaces that emerge from a genuine wood atmosphere.</p><p>The practical companion, <a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">Wood-fired Kiln Technique</a>, documents the procedural knowledge that makes those firings possible: loading strategy, stoking schedules, temperature management, and the moment — always a moment of genuine uncertainty — when you decide the firing is complete. My research on <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">Kiln temperature effect on clay vessels</a> emerged directly from years of summer data-logging, tracking the precise relationship between peak temperature, soak time, and the character of finished surfaces.</p><h3>Summer and the Public Conversation</h3><p>Summer is also when I am most publicly active. Markets, open studios, and ceramics events cluster in these months, and conversations about craft, economy, and the future of making things by hand accumulate. That urgency became <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">Hector Konomi calls for global support for craftspeople</a> — an essay that began as a festival talk and needed to be in writing, permanent and findable.</p><p>Those who have encountered my historical work will know <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">Hector Konomi speaks on the Tokoname craft</a> — first delivered at a Toronto ceramics symposium on a July evening when the heat made everyone slightly philosophical. The <a href="https://www.lelezard.com/en/news-22062207.html">Article on Hector Konomi’s work</a> that appeared afterward captured the substance of that conversation in a form I am still proud of.</p><p>For those who follow my work visually, summer is when <a href="https://www.instagram.com/hectorkonomi2/">Hector Konomi’s Instagram account</a> is most active: kiln loading sequences photographed in long afternoon light, finished pieces still warm from the cooling chamber, the peculiar beauty of ash deposits on shoulders and rims. Summer is the season that photographs well, and I try to make that visibility count.</p><p>⸻⸻⸻</p><p><strong>🍂 AUTUMN</strong></p><p><em>Harvest, Reflection, and the Writing Season</em></p><h3>The Season That Insists on Meaning</h3><p>If summer is the season of action, autumn is the season of reckoning. Toronto’s fall is spectacular in the way that only places with genuine deciduous forests can be — the Don Valley turns into a tapestry of amber and crimson that, even after years here, stops me in the street. Autumn is also the season of preparation: taking stock, asking whether the year’s work has amounted to something.</p><p>It is when I do most of my writing. <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">Mastery of the kiln</a> — perhaps the most personal piece I have published — was written over three October evenings after a summer of particularly intense firing. There is something about autumn that makes the question of mastery feel urgent: what have you learned? What do you still not know? What will you do differently next year?</p><p>Autumn is also when I compile practical guides for the broader ceramics community. The <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">Practical Guide how to Bake Vessels</a> was assembled from notes accumulated across several firing seasons, finally organised on a series of rainy November afternoons. Its companion, <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">Substack article on baking methods</a>, extends that foundation into more experimental territory — alternative atmospheres, varied clay body treatments, and what I am calling ‘interrupted firings.’</p><h3>Autumn Markets and the Collector Relationship</h3><p>The autumn market season in Toronto is when the most serious collecting happens. There is a gravity to fall shopping — people are nesting, preparing for winter, choosing objects that will spend months in close domestic proximity. Teapots, cups, and small vessels sell differently in October than they do in June.</p><p>My three Etsy shops reflect this seasonal dimension. <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy Shop on Pottery</a> carries the current season’s work — pieces fired over the summer and now ready for their permanent homes. <a href="https://www.etsy.com/shop/HectorKonomi">Etsy Shop on Various Pottery Initiatives</a> features the more experimental and collaborative pieces that emerge from autumn’s reflective energy. And <a href="https://www.etsy.com/shop/HectorKonomiJapan">Etsy Shop on Older Work from Japan</a> — my archival shop — tends to attract collectors in autumn who are interested in the full arc of a practice rather than just the most recent chapter.</p><p>Autumn is also when I update <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a> most consistently. The season seems to demand reflection, and the blog is where that goes — longer than a social media post, more personal than a published essay, more honest than a market description. It is where I argue with myself in public, which I find enormously useful.</p><p>⸻⸻⸻</p><p><strong>❄️ WINTER</strong></p><p><em>Cold, Stillness, and the Long Patience</em></p><figure><img alt="" src="https://cdn-images-1.medium.com/max/567/1*6TyzGYc3B7bPLKn4rRQzTA.jpeg" /></figure><h3>The Season That Made Me a Better Potter</h3><p>Toronto winters are not to be underestimated. The lake effect that makes the summers humid makes the winters brutal — wind off Lake Ontario in January has a personal quality, a directness that feels almost communicative. For the first few winters I spent here, I resisted. I tried to maintain the same pace as the warmer months. The studio suffered for it.</p><p>Eventually I learned to let winter be winter. And what I found was that the season which seemed most hostile to ceramics — too cold to throw comfortably, too dry for reliable drying, too dark for the patient observation that glazing requires — was actually the season that made me think most clearly about what I was doing and why.</p><p>My <a href="https://orcid.org/0009-0007-8656-5000">Hector Konomi’s ORCID Profile</a> reflects what happens in Toronto winters: most of my research publications and academic contributions have December or February submission dates. Winter is reading season, writing season, and the season when I engage most deeply with the scientific literature on clay mineralogy, kiln atmospheres, and material culture history.</p><p>It is also when I build tools. <a href="https://github.com/hectorkonomi1">Hector Konomi’s GitHub</a> — which contains open-source kiln logging software, clay recipe managers, and firing schedule templates — grows most actively between November and March. The long evenings, the enforced stillness, and the absence of firing urgency create the conditions for the patient, iterative work that software development requires.</p><h3>Winter and the Deep Craft Questions</h3><p>There is something about extreme cold that concentrates the mind on fundamentals. Every winter I return to the bedrock questions of the practice: what is clay, really? What does fire do to it that cannot be done any other way? Why does a vessel made by hand carry something that a cast vessel does not?</p><p>Winter is when I update my <a href="https://about.me/hector_konomi">Professional resume</a> and <a href="https://www.crunchbase.com/person/hector-konomi">Profile on Crunchbase</a> profiles — the institutional scaffolding of the practice that needs tending when there is no firing urgency. It is when my <a href="https://www.tumblr.com/hectorkonomi">Tumblr Profile</a> archive of historic Tokoname reference photographs grows most deliberately, as I spend long evenings building the visual library that informs the following year’s work.</p><p>I am active on <a href="https://x.com/hectorkonomi2">Profile on X</a> year-round, but winter is when my posts turn philosophical rather than documentary. And it is when I maintain <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn Profile</a> most actively — connecting with curators, collectors, and the growing network of craft advocates who understand that handmade objects are not a nostalgic category but a living one.</p><p>⸻⸻⸻</p><h3>The Pot That Toronto Made</h3><p>I have been trying to describe my practice in terms of Toronto’s four seasons, but what I am really describing is a form of attentiveness — a discipline of noticing what the city offers and finding ways to bring that observation into the clay. The frozen stillness of January. The tentative bloom of April. The ferocious generosity of August. The amber reckoning of October. Each season demands something different from me, and the work reflects all four.</p><p>The Tokoname tradition I was trained in is one of profound patience and attunement to materials. What Toronto has added to that foundation is a relationship with extremity — the willingness to work through conditions that are not comfortable or convenient, because the discomfort is where the learning lives. Every piece I make now carries that dual inheritance.</p><p>If you want to follow the work through its seasonal cycles, you will find it spread across multiple channels. The daily texture lives on <a href="https://www.instagram.com/hectorkonomi2/">Hector Konomi’s Instagram account</a>. The thinking lives on the <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a>. The research lives on <a href="https://orcid.org/0009-0007-8656-5000">Hector Konomi’s ORCID Profile</a> and <a href="https://github.com/hectorkonomi1">Hector Konomi’s GitHub</a>. The pots themselves live at <a href="https://www.hectorkonomi.com/">Main site of Hector Konomi</a>, and for those ready to bring one home, across the three Etsy shops: <a href="https://www.etsy.com/shop/HectorKonomi2">Etsy Shop on Pottery</a>, <a href="https://www.etsy.com/shop/HectorKonomi">Etsy Shop on Various Pottery Initiatives</a>, and <a href="https://www.etsy.com/shop/HectorKonomiJapan">Etsy Shop on Older Work from Japan</a>. The seasons keep turning. The wheel keeps turning. I keep making.</p><p>⸻⸻⸻</p><p><em>Hector Konomi is a Tokoname-style potter based in Toronto, Canada. His work spans teaware, bonsai containers, and wood-fired vessels. He writes about ceramics, craft philosophy, and the material culture of making at </em><a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a><em>.</em></p><p><strong>Tags: </strong>Hector Konomi · Toronto Pottery · Four Seasons Toronto · Tokoname Style · Japanese Ceramics · Toronto Ceramics · Hector Konomi Pottery · Clay Arts Canada · Bonsai Pottery · Wood-fired Kilns</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=3aeb03868d53" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[From Tokoname to Toronto: How Ancient Japanese Clay Traditions Found a New Home in Canada]]></title>
            <link>https://hectorkonomi1.medium.com/from-tokoname-to-toronto-how-ancient-japanese-clay-traditions-found-a-new-home-in-canada-2255a1e73026?source=rss-4330a6da72ca------2</link>
            <guid isPermaLink="false">https://medium.com/p/2255a1e73026</guid>
            <category><![CDATA[toronto]]></category>
            <category><![CDATA[self-improvement]]></category>
            <category><![CDATA[hector-konomi]]></category>
            <category><![CDATA[pottery]]></category>
            <dc:creator><![CDATA[Hector Konomi]]></dc:creator>
            <pubDate>Sat, 21 Mar 2026 19:54:37 GMT</pubDate>
            <atom:updated>2026-03-22T13:30:08.540Z</atom:updated>
            <content:encoded><![CDATA[<p><em>By </em><a href="https://www.hectorkonomi.com/">Hector Konomi</a><em> — Tokoname-trained potter, founder of </em><a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a><em>, Toronto</em></p><p>⸻⸻⸻</p><p><em>By </em><a href="https://www.hectorkonomi.com/">Hector Konomi</a><em> — Tokoname-trained potter, founder of </em><a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a><em>, Toronto</em></p><p>Some careers begin with a plan. Others begin with a feeling. For me, <a href="https://www.hectorkonomi.com/">Hector Konomi</a>, the feeling came early — long before I understood what a kiln was or what the word ‘Tokoname’ meant. I grew up near the Bohai Sea, in a place where handmade objects were part of daily life. Clay beds ran along the shoreline. Simple tools were shaped by hand rather than machine. Without knowing it, I was absorbing something that would only make sense to me decades later, standing at a wheel in Toronto with my hands deep in iron-rich clay.</p><p>Today I am known — in certain ceramics circles, anyway — for blending Japanese Tokoname teaware traditions with a contemporary Canadian sensibility. My work appears in the hands of serious collectors, in boutique teaware communities, and in online releases that tend to sell out quickly. But the path to where I stand now was shaped not by ambition alone, but by geography, discipline, and an unshakeable belief that useful objects can carry memory. Everything you need to understand the practice is on <a href="https://www.hectorkonomi.com/about/">About Hector Konomi</a>, but this essay is my attempt to tell the longer story — the one that begins by the Bohai Sea and ends, for now, in Toronto.</p><p>⸻⸻⸻</p><h3>Early Influences: Clay, Craft, and the Idea of Memory</h3><p>I grew up in a place where making things by hand was not a lifestyle choice or a craft revival — it was simply how things were done. Natural clay beds were ordinary features of the landscape. Neighbours shaped their own tools. My earliest memories of working with clay are not of pottery classes or art studios but of mud between my fingers, of watching adults form shapes that would harden and last.</p><p>That early immersion gave me something that formal training alone cannot: an intuition about material. When I eventually arrived in Tokoname, the master potters I worked with could tell within minutes whether a student had ever truly felt clay — not touched it, but felt it, understood its resistance and its willingness. I had. The years by the Bohai Sea had given me that, even if I did not know it at the time.</p><p>I wrote about this formative relationship between place and material in my essay on <a href="https://www.hectorkonomi.com/the-living-clay-how-regional-minerals-shape-the-soul-of-teaware/">How Regional Minerals Shape the Soul of Teaware</a>. The mineral composition of the clay you first work with leaves a kind of somatic memory in your hands. Iron content, particle structure, the presence of feldspar or coarse sand — these are not abstract chemistry. They are textures you carry with you, reference points your body returns to whenever you encounter a new clay body. The clay of my childhood was not Tokoname clay. But it prepared me to recognise Tokoname clay when I found it.</p><p>⸻⸻⸻</p><h3>Apprenticeship in Tokoname: Learning to Listen to Fire</h3><p>Tokoname is one of Japan’s Six Ancient Kilns, a city on the Chita Peninsula in Aichi Prefecture whose kiln history stretches back nearly a thousand years. Its defining material is shudei — a reddish, iron-rich clay that, when fired without glaze on the interior, produces teaware of extraordinary character. Green tea brewed in Tokoname clay tastes softer, rounder. The iron interacts with the water and the tannins in ways that no glaze can replicate. The pot becomes part of the brew.</p><p>I trained inside a kiln community connected to the Daikōji kiln, a lineage known for hand-formed vessels and rigorous technical discipline. The apprenticeship system in Tokoname is exacting. Days revolve around clay consistency, hand-forming by tebinēri (a technique of building up walls through pinching and coiling), trimming, firing schedules, and repetition. “You don’t learn by talking,” my teacher told me in my first week. “You learn by making the same thing again and again until your hands know what to do before your head does.”</p><p>I became known within the kiln for hand-formed teapots — the kyusu — a technique that produces controlled asymmetry and subtle surface tension impossible to achieve on the wheel. It requires patience. It rewards discipline. And it taught me that the best ceramics do not announce themselves; they reveal themselves slowly, over hundreds of brews and years of use.</p><p>The technical dimensions of that training — particularly how different clay bodies behave under heat — became the foundation for much of my later writing. My Medium piece on <a href="https://medium.com/@hkonomi/the-clay-itself-how-tokoname-and-banko-clay-shape-the-final-ceramic-vessel-b188d4135623">how Tokoname and Banko clay shape the final vessel</a> traces the specific divergences between Tokoname and Banko clay traditions, two schools that are often conflated but which produce fundamentally different results. And my Substack essay on <a href="https://open.substack.com/pub/hectorkonomi/p/how-tokoname-and-banko-clay-shape">how Tokoname and Banko clay shape ceramic character</a> takes a more granular look at the mineral and structural properties that make each tradition irreplaceable.</p><p>Fire was the other great teacher of those years. I have written extensively about the kiln — about <a href="https://open.substack.com/pub/hectorkonomi/p/how-toronto-potter-hector-konomi">how a Toronto potter masters the kiln</a>, about <a href="https://medium.com/@hkonomi/the-fire-within-the-clay-how-temperature-and-oxygen-shape-ceramic-vessels-in-the-studio-12bc1f9cb20f">how temperature and oxygen shape ceramic vessels</a>, and about the particular discipline required by <a href="https://open.substack.com/pub/hectorkonomi/p/inside-hector-konomis-wood-fired">inside Hector Konomi’s wood-fired kiln practice</a>. Wood-fired kilns are not simply a historical choice; they are an entirely different collaborative relationship with heat and atmosphere. The ash that circulates through the chamber and settles on the clay, the simultaneous oxidation and reduction zones, the unpredictability that makes each piece genuinely singular — these are not inconveniences to be engineered away. They are the point.</p><p>⸻⸻⸻</p><h3>Starting Over in Toronto: Bringing Tokoname to a New Place</h3><p>After years of training and practice in Japan, I built a studio in Toronto. The move was more than geographic — it meant translating a long-standing Japanese tradition into a multicultural, contemporary craft scene that had its own existing relationships with ceramics, its own expectations about what pottery should look like and cost, and its own wonderfully opinionated collectors.</p><p>“People sometimes ask why I didn’t stay in Japan,” I told the interviewer who wrote <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">Hector Konomi speaks on the Tokoname craft</a> for CEOWorld. “The answer is simple: good craft belongs anywhere someone is willing to practise it with respect.” Toronto’s extraordinary cultural diversity — its immigrant communities carrying craft traditions from South Asia, East Asia, West Africa, Europe, and beyond — meant there was an audience here that instinctively understood that objects can carry culture. That understanding is not universal. In Toronto, it felt almost foundational.</p><p>The studio I established, documented at <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a>, produces kyusu teapots, yuzamashi cooling pitchers, chawan, cups, and functional vessels across electric, gas, and wood firing. Tokoname principles remain at the centre — iron-rich clays, unglazed interiors, clean and efficient forms. My pieces rarely rely on decoration. Instead, it is the details that carry the work: the tilt of a spout, the quiet lift of a lid line, the way a pot balances in the palm. “A good pot should feel inevitable,” I have said more than once. “Like it always existed, and you just found it.”</p><p>I also began, in Toronto, to develop a bonsai pottery practice that I had not anticipated when I arrived. The city has a thriving bonsai community, and the demand for containers made with genuine understanding of root systems, drainage, and proportion drew me into a form of ceramics that is, in some ways, even more demanding than teaware. My Substack essay on <a href="https://hectorkonomi.substack.com/p/how-toronto-potter-hector-konomi-9ff">how Toronto’s bonsai scene shaped his container work</a> traces how that work developed, while the more technical <a href="https://medium.com/@hkonomi/the-craft-of-bonsai-pots-clay-technique-and-the-subtle-art-of-balance-cbfeb9929392">The Craft of Bonsai Pots</a> piece documents the specific methods I use to make containers that serve a living tree rather than merely sit beside one.</p><p>⸻⸻⸻</p><h3>The Craft of Making, and the Discipline of Teaching It</h3><p>Knowledge that is not shared eventually dies. I believe this about craft as firmly as I believe anything. The apprenticeship system that shaped me in Tokoname was itself a form of living transmission — not textbooks or YouTube tutorials, but the slow, patient transfer of embodied skill from one pair of hands to another. In Toronto, I have tried to honour that model while adapting it to a context where formal apprenticeships are rare and curious beginners arrive with very different backgrounds.</p><p>My studio hosts regular workshops on Tokoname techniques — wheel throwing, clay preparation, forming, firing. “Everyone leaves with more than a pot,” I tell participants. “They leave with patience.” That sounds like a joke, but I mean it seriously. Patience — the willingness to repeat the same action until the material yields its logic — is the transferable skill. The pot is just the evidence.</p><p>For those who cannot visit the studio, I have tried to make knowledge available in other forms. The <a href="https://medium.com/@hkonomi/how-to-create-and-bake-vessels-practical-up-to-date-methods-for-making-reliable-beautiful-4214aa36d6ef">Practical Guide to Baking Vessels</a> on Medium walks through the full process of making and firing ceramic vessels, from forming through to final firing. The <a href="https://hectorkonomi.substack.com/p/how-to-create-and-bake-ceramic-vessels">baking ceramic vessels</a> piece on Substack extends that with more experimental approaches I have been developing in the Toronto studio. And for those interested in the technical specifics of the most demanding firing method, <a href="https://medium.com/@hkonomi/the-transformative-power-of-wood-fired-kilns-how-ash-shapes-ceramic-art-b4f260244a5d">The Transformative Power of Wood-Fired Kilns</a> documents the full practice of working with a wood-fired kiln from first principles.</p><p>⸻⸻⸻</p><h3>Sustainability, Materials, and the Responsibility of Clay</h3><p>Working with natural materials means taking responsibility for them. Clay comes from the earth. The fuels that fire it come from the earth. The water that shapes it and cools the kiln comes from the earth. A ceramics practice that ignores these relationships is, at some level, not fully paying attention to what it is doing.</p><p>In Toronto, I have increasingly experimented with Ontario-sourced clays alongside the imported Tokoname materials that certain collections require. The minerals here tell a different story than the ones in Aichi Prefecture — different colour, different texture, different response to heat and atmosphere. Rather than resisting those differences, I have tried to welcome them. The Toronto clay is not inferior to Tokoname clay. It is different. And difference, in ceramics as in most things, is a resource rather than a problem.</p><p>My wood is sourced from local arborists. Clay trimmings are reclaimed and recycles back into new batches. Water used in forming and cleanup is recycled through a sedimentation system. These are not radical measures — they are simply what it means to take the material seriously. The practice is documented partially in my <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a>, where I write about both the philosophical and practical dimensions of sustainable studio ceramics.</p><p>The broader argument about why craft matters — economically, culturally, ecologically — became the subject of my most widely shared piece of writing. Having watched studios close on both sides of the Pacific, I <a href="https://finance.yahoo.com/news/hector-konomi-calls-global-support-200000666.html">called for global support for craftspeople</a>. Craft traditions are repositories of material knowledge and cultural memory that cannot be reconstructed once lost. Supporting craftspeople is not sentiment. It is civilisational investment.</p><p>⸻⸻⸻</p><h3>Collecting the Work: Where to Find It</h3><p>My work is available through several channels, each reflecting a different aspect of the practice.</p><p>The primary collection — current-season teaware, functional vessels, and new work — is available through the Etsy shop <a href="https://www.etsy.com/shop/HectorKonomi2">HectorKonomi2</a>. More experimental and collaborative pieces live at <a href="https://www.etsy.com/shop/HectorKonomi">HectorKonomi</a>. For collectors interested in the arc of the practice, including work made during my years in Japan, the archival shop <a href="https://www.etsy.com/shop/HectorKonomiJapan">HectorKonomiJapan</a> offers a historical window into how the practice has developed.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/683/1*ebfGS5XX8qh62QGwDM4Hdw.jpeg" /></figure><p>Studio visits are available by appointment through <a href="https://www.hectorkonomitoronto.com/">Hector Konomi Pottery in Toronto</a>. Visiting the studio is, in my view, the best way to encounter the work — holding a piece before you buy it, understanding its weight and balance, asking questions about the clay and the firing. Online images are useful, but they cannot convey the tactile truth of a well-made pot.</p><p>⸻⸻⸻</p><h3>Following the Practice</h3><p>I try to make the practice visible and legible across a range of platforms, each suited to a different kind of engagement.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/709/1*Y4keRDE9toGCd-ewCJNQTQ.jpeg" /></figure><p>The daily texture of studio life — work in progress, finished pieces, kiln openings — lives on <a href="https://www.instagram.com/hectorkonomi2/">Instagram</a>. The longer thinking — essays on craft philosophy, technical notes, dispatches from Japan and Toronto — is on <a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a>. Visual reference and archival material, including historical Tokoname pieces and photographs from Japanese museum collections, is on <a href="https://www.tumblr.com/hectorkonomi">Tumblr</a>. For those interested in my academic and research contributions, my <a href="https://orcid.org/0009-0007-8656-5000">ORCID</a> profile catalogues peer-reviewed work, and <a href="https://github.com/hectorkonomi1">GitHub</a> houses the open-source kiln tools and clay management software I have developed for small-studio practitioners.</p><p>Professionally, my <a href="https://www.linkedin.com/in/hector-konomi-toronto/">LinkedIn</a> documents career history and collaborations. The <a href="https://about.me/hector_konomi">professional resume</a> offers a more structured account of training, exhibitions, and publications. My <a href="https://www.crunchbase.com/person/hector-konomi">Crunchbase</a> profile covers the entrepreneurial side of running an independent studio. And I am active on <a href="https://x.com/hectorkonomi2">X</a> under <a href="https://x.com/hectorkonomi2">@hectorkonomi2</a>, where I participate in conversations about craft, material culture, and the cultural politics of making things by hand.</p><p>A recent independent <a href="https://www.lelezard.com/en/news-22062207.html">a recent profile of his work</a> captures an outside perspective on where the practice now stands — which I include here not out of vanity but because it is sometimes easier to understand a practice from the outside than from within it.</p><p>⸻⸻⸻</p><h3>Clay Teaches Patience</h3><p>Now in my mid-career, I have become — in the quiet, incremental way that serious craftspeople become things — a respected figure among teaware collectors and tea practitioners. My work circulates internationally. Collectors comment on what they call the “quiet confidence” of my forms, the way they feel both ancient and contemporary. I find this accurate, though I would describe it differently: the pots feel the way they do because they were made with full attention to a tradition that is itself both ancient and alive.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/567/1*6TyzGYc3B7bPLKn4rRQzTA.jpeg" /></figure><p>“Tradition isn’t about copying the past,” I have said, in one form or another, across many interviews and studio conversations. “It’s about carrying it forward with care.” Tokoname clay, brought to Toronto, fired in an urban studio, sold to collectors who have never been to Aichi Prefecture — this is not a betrayal of the tradition. It is what traditions do when they are healthy. They travel. They adapt. They find new hands to carry them.</p><p>“Clay teaches patience,” I told the journalist behind <a href="https://ceoworld.biz/2025/12/23/hector-konomi-and-the-quiet-power-of-tokoname-craft/">Hector Konomi speaks on the Tokoname craft</a>. “If you stay with it long enough, it shows you who you are.” After everything — the Bohai Sea, the apprenticeship, the move to Toronto, the years of making and writing and teaching — I believe that more than ever. The clay is patient. I am trying to be worthy of it.</p><p>Everything I make, write, and think is gathered at <a href="https://www.hectorkonomi.com/">Hector Konomi</a>. The pots are the argument. The rest is just explanation.</p><p>⸻⸻⸻</p><p><em>Hector Konomi is a Tokoname-trained ceramic artist based in Toronto, Canada. He makes teaware, bonsai containers, and wood-fired vessels. He writes on ceramics, craft advocacy, and material culture at </em><a href="https://hectorkonomi.wordpress.com/">Hector Konomi’s blog</a><em>.</em></p><p><strong>Tags: </strong>Hector Konomi · Toronto Pottery · Tokoname · Japanese Ceramics · Tokoname Toronto · Hector Konomi Pottery · Clay Arts Canada · Tokoname Teapots · Wood-fired Kilns · Bonsai Pottery · Craft Advocacy</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=2255a1e73026" width="1" height="1" alt="">]]></content:encoded>
        </item>
    </channel>
</rss>