<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0" xmlns:cc="http://cyber.law.harvard.edu/rss/creativeCommonsRssModule.html">
    <channel>
        <title><![CDATA[Stories by Michael J. Cripps on Medium]]></title>
        <description><![CDATA[Stories by Michael J. Cripps on Medium]]></description>
        <link>https://medium.com/@michaeljcripps?source=rss-6419553b9b00------2</link>
        <image>
            <url>https://cdn-images-1.medium.com/fit/c/150/150/0*izDwvroz6b1YFs6p.jpg</url>
            <title>Stories by Michael J. Cripps on Medium</title>
            <link>https://medium.com/@michaeljcripps?source=rss-6419553b9b00------2</link>
        </image>
        <generator>Medium</generator>
        <lastBuildDate>Wed, 18 Nov 2026 11:35:16 GMT</lastBuildDate>
        <atom:link href="https://medium.com/@michaeljcripps/feed" rel="self" type="application/rss+xml"/>
        <webMaster><![CDATA[yourfriends@medium.com]]></webMaster>
        <atom:link href="http://medium.superfeedr.com/" rel="hub"/>
        <item>
            <title><![CDATA[A Writing Failure]]></title>
            <link>https://medium.com/rising-cairn/a-writing-failure-95c310c03384?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/95c310c03384</guid>
            <category><![CDATA[writing]]></category>
            <category><![CDATA[failure]]></category>
            <category><![CDATA[collreadwrit]]></category>
            <category><![CDATA[schools]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Thu, 01 Dec 2016 20:54:53 GMT</pubDate>
            <atom:updated>2019-01-10T19:19:29.858Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/700/1*jQqRRCnEakWfsD5atMc9KA.jpeg" /><figcaption>Winter at the University of Connecticut — Old Wilbur Cross Library Building</figcaption></figure><p>I failed my first paper in college. I was enrolled in English Composition in my first fall term, and I had put a lot of effort into the paper — or so I remember. I was full of doubt that first semester. I had not taken high school all that seriously and drifted a bit after that. I had taken up a trade as a painter, but I really couldn’t imagine doing that for my entire life. I got lucky when UConn admitted me. Could I make it? Failing that first paper was a major blow to my fragile college self, and it could have sent me packing.</p><p>My writing class was a requirement. I was in class with about twenty other freshmen and sat on the wall with the windows. We sat in a big circle, with the desks spread out around the walls to encourage discussion. Our teacher, a graduate student teaching assistant with a British accent, worked hard to get us talking, but I don’t know if she was really all that successful. My memory has faded over the intervening decades. Given the importance of this failing paper, it bothers me a bit that I cannot recall the actual paper assignment. I remember a paper on <em>The Color Purple</em> and a paper responding to a ridiculous prompt: “What would you do if you had only twenty-four hours to live?” I did well on those. But that first paper topic escapes me. Maybe I have repressed the memory.</p><p>I know that I tried hard to write a successful paper. I tried hard on all my work in college. I didn’t always know what to do, but I surely worked hard as a student. There were no required drafts or revisions in my Composition class. We could always <em>revise</em> a final paper for a possible better grade, but the class had no drafting or revision built into the structure. (I now know that this was very poor pedagogy even by the expectations of the mid-80s, but it seemed normal to me at the time. I had never drafted or revised in high school.) Still, I know I wrote at least two drafts because I had to. I didn’t know how to type and had to hire a typist to transfer my hand-written paper to a typewritten product. Given my poor penmanship, I simply had to write a draft, reorganize it into something that might make sense to someone, <em>and</em> rewrite that organized draft into something legible. If your typist can’t read what you wrote, he can’t type your paper up. The paper came back with a failing grade and what I remember to be a large number of marks on each page.</p><p>I do not credit my Composition teacher with teaching me how to write in college. If she had done that, I would not have earned a D on my first history paper the following term! But the marks she left on that first Composition paper showed me something important. I was new to college and was attempting to write in a way that I <em>imagined</em> would be required in college. I tried to write long, convoluted sentences with multiple commas when I very much lacked the ability to control those kinds of structures. My effort had outstripped my ability, and I got spanked. After that, I simplified my sentence structures, stuck mostly to words I already knew or picked up in school, and focused more attention on <em>what</em> I was trying to say and less on some imagined idea of college-level writing. My papers in Composition quickly rose to the B level, or better. In that class at least, this happened mostly because my sentences quickly improved.</p><p>I learned two things in Composition that helped me in college. From a literacy perspective, I learned that trying to perform my idea of college writing when I didn’t know what that meant was a mistake. College writing is not about complicated sentences with many phrases and clauses — or it’s not that if you lack the ability to control the punctuation of such sentences. After that paper, I never tried to write sentences I couldn’t control, and I found this helped me focus my energies on my ideas and arguments. Second, I started to learn an important life lesson in Composition: leave nothing on the table. For some reason, I never revised that first paper. I have two B’s on my academic record, and one of them is in English Composition. I might have earned an A- or even an A in that class had I done that revision.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=95c310c03384" width="1" height="1" alt=""><hr><p><a href="https://medium.com/rising-cairn/a-writing-failure-95c310c03384">A Writing Failure</a> was originally published in <a href="https://medium.com/rising-cairn">Rising Cairn</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Testing Double Tags]]></title>
            <link>https://medium.com/@michaeljcripps/testing-double-tags-f5f5ccdabf45?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/f5f5ccdabf45</guid>
            <category><![CDATA[double]]></category>
            <category><![CDATA[collreadwrit]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Sun, 20 Nov 2016 17:21:14 GMT</pubDate>
            <atom:updated>2016-11-21T00:47:54.211Z</atom:updated>
            <content:encoded><![CDATA[<p>this is really just a test story intended to explore Medium search via two tags.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=f5f5ccdabf45" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part IV — Reproducing the…]]></title>
            <link>https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iv-reproducing-the-cd2d21ec91f4?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/cd2d21ec91f4</guid>
            <category><![CDATA[restoration]]></category>
            <category><![CDATA[vintage]]></category>
            <category><![CDATA[surfboard]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Sun, 29 May 2016 23:21:00 GMT</pubDate>
            <atom:updated>2016-11-19T18:05:35.764Z</atom:updated>
            <content:encoded><![CDATA[<h3>Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part IV — Reproducing the Weber Feather Logo)</h3><p>The logo on the BLACK SHEEP Weber Feather was washed out and faded, which isn’t an issue on a board that isn’t being restored. The issue was that the large delamination on the board was right under the logo. I needed to cut out the glass around the logo to address the delamination.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*jybBjLUrXEc7JI67n9fjsA.png" /><figcaption>WEBER <em>Feather logo, with original yellow color washed out from delamination, with edges cut and sliced but removal pending.</em></figcaption></figure><p>Initially, I had planned to just re-glass the logo and glass back onto the board, with extra cloth to strengthen the section. As with the t-band stringer section (discussed in <a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.nj3zvt6pu">Part II</a>) , things weren’t so simple. I expected to find a faded logo sandwiched between two sheets of cloth and sealed in the glass. What I found was entirely different.</p><p>The Feather logo rests <em>under</em> the lamination, not between the cloth layers. Most of the printed layer was stuck to the delaminated section, while the rest of the logo material was fixed to the foam/stringer. As water got into the board and the deck delaminated, it seems that the color faded from the logo. Or, possibly, the logo itself helped contribute to the delamination.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*Rf5P-hZPnvXxF_tMtBW1Aw.jpeg" /><figcaption>Some of BLACK SHEEP’S logo still stuck to the foam/stringer.</figcaption></figure><p>None of this prohibited a more basic repair, but it provided the opportunity to bring a little more color to the logo. Since the board needed to dry out, preventing any rapid action, I decided to take on the challenge of replicating the logo.</p><p>Cleaning the mildew and loose material from the logo on the foam also made it possible to better date the board, which was truly interesting.</p><p>Once things were a bit cleaner, I could see the installation instructions for this GLASS-ON SLYD EZE type of decal. I was able to search this information in conjunction with WEBER decals and turned up the following image of a vintage WEBERPERFORMER decal.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*Lc8FghHzAD5IlwCVPPemzg.jpeg" /><figcaption>Original instructions for affixing Dewey Weber’s logo decals. Taken from the back of an original, NOS WEBERPERFORMER logo image. (Source: eBay)</figcaption></figure><p>This was a real find because the serial number on the Morse Decal included a manufacturing date (1/67). Returning to the BLACK SHEEP Feather’s decal remnants, I was able to tell that my Morse Decal was manufactured in 10/67 (see below). The BLACK SHEEP had to be glassed <em>after</em> September, 1967, and it’s conceivable that it’s actually a 1968 board.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*7IIYBuzyJJ9VNtSIV3XMhg.jpeg" /><figcaption>Morse Decal’s WEBER <em>Feather</em> installation instructions, with serial number (13383 6462 10/67), dating BLACK SHEEP to October 1967, or later.</figcaption></figure><p>I never would have found this information had I not elected to get into a logo reconstruction as part of my rehabilitation of the board.</p><h4>Finding and Making a WEBER Feather Logo</h4><p><a href="http://deweyweber.com/">Dewey Weber Surf Boards</a> currently builds a Weber Feather based on the original template. I initially thought they would be a great resource for a logo. A close comparison of the <em>original</em> logo with the <em>contemporary</em> logo, however, reveals at least one not-so-subtle difference: The <em>F</em> in the original logo stands noticeably separate from the <em>eather</em>. This separation is removed in the current Feather logo.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/451/1*CuHeKm1B9vwHX8M2RzgH2A.png" /><figcaption>Left: Original (<a href="http://www.surfcrazy.com/stanleys/html/logos.html">http://www.surfcrazy.com/stanleys/html/logos.html</a>); Right: Contemporary (<a href="http://deweyweber.com/">http://deweyweber.com</a>)</figcaption></figure><p>Fortunately, the Internet contains a few good quality images of the Weber Feather logo on vintage boards. At the time I was searching for an image to work from, <a href="http://islandtradersurf.com/2014/04/16/1967-dewey-weber-feather-vintage-longboard-surfboard/">Island Trader Surf Shop</a> was selling a stringerless vintage Feather and had a very helpful close up of the logo.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*wrvuQZSP7VAilFdvGPENIw.png" /><figcaption>Vibrant colors on this vintage stringerless Weber Feather for sale at <a href="http://islandtradersurf.com/2014/04/16/1967-dewey-weber-feather-vintage-longboard-surfboard/">Island Trader Surf Shop</a> in Stuart, FL.</figcaption></figure><p>Matching the actual colors of the original logo using web images of boards that are nearly fifty years old would be impossible. But I could hopefully create a decent replica of the original colors — or one that would look presentable.</p><p>I opted for the current Weber Feather logo’s colors. Although the yellow is a bit more mustard-like than the color in the Feather logo at Island Trader, it is really close to the color of the logo in <a href="http://www.surfcrazy.com/stanleys/html/logos.html">Stanley’s Surfboard Logo Library</a>. And who knows WEBER red better than Dewey Weber Surf Boards?</p><p>The graphical elements of the logo involved some relatively straightforward work in a graphics program. Begin with a couple rectangles, then bend the sides of one rectangle inward to achieve the desired bow-tie effect.</p><p>Fonts were another challenge. My font library contained the exact font used in the original Feather type: Commercial Script. The WEBER font, on the other hand, proved too challenging. I had some close fonts, but nothing quite as “stretched” as the WEBER. Efforts to tweak those fonts proved unsuccessful. I ended up starting with an image of WEBER and carefully reworking it until I decided enough was enough. (I give it a B-, mostly because of the W.)</p><p>Since I possess an original board with a physical logo, I was able to determine the exact dimensions for the logo.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*TDMG3xDI8mVqWlbKL6thYA.jpeg" /><figcaption>My custom reproduction of the original Weber Feather logo.</figcaption></figure><h4>Printing the Logo</h4><p>The next step was printing because I needed the digital image turned into a physical logo that would work under the glass. Advice is a bit mixed on surfboard logo printing.</p><p>At <a href="http://classicbingsurfboards.com/bing-surfboards/classic-bing-restorations/">Classic Bing Surfboards</a>, I found images of a computer-developed reproduction of an original logo and silkscreening. The site offered no information about the print medium, but rice paper was apparently used for vintage logos — at least some of the time.</p><p><a href="http://www.swaylocks.com/groups/major-board-repairrestoration-project-need-help-w-logo">Speedneedle on Swaylocks</a>, in a discussion of logo recreation, recommended the following medium:</p><blockquote>Use “Acid Free Tissue Paper” from an art store, lightly tack it to a piece of card and run it through a printer. Fix the ink with a whiff of aerosol clear laquer [sic] before laminating.</blockquote><p>I elected to try Speedneedle’s recommended approach, sourced a little tissue paper from the art store, and brought it all to the local print shop to have the logo laser printed.</p><p>My local printer owed money to his service guy and was unwilling to risk running tissue paper through his $5000 commercial printer. I left the shop somewhat disappointed, but this turned out to be a good thing. I went home and trolled the internet a bit more to explore ink jet prints and polyester resins before discovering that laser prints don’t play well with resins. Ink jet is the way to go, and I have an ink jet printer. I plugged my computer into the printer and ran about 8 copies of the logo, just in case.</p><h4>Glassing the Logo</h4><p>Intent on avoiding a problem with colors running or the paper falling apart, I tested the logo in a lamination situation before attempting to glass it onto the board.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*YLlEijkMV-Y3yvidKBcCmg.png" /><figcaption>Test lamination with the reproduction WEBER <em>Feather</em> logo.</figcaption></figure><p>I glassed a copy of the logo to a piece of cast-off US Blanks foam procured from Charlie at <a href="http://mainesurfersunion.com/">Maine Surfer’s Union</a>. Perfect? No. Pretty damned good? Yup.</p><p>I ended up using white acrylic paint in the bowtie area around the yellow logo field prior to laminating it to the foam because the paper turns clear when wet with resin. The brushstrokes show a bit, but the whole thing came out nicely. Satisfied with the quality, I moved on to the board itself.</p><h4>Logo and Delamination Repair</h4><p>Next up, showtime! The board itself ended up with a seemingly endless delamination that emanated out from under the original logo and towards the tail. Altogether, I ended up with exposed foam roughly 12&quot; wide and about 16&quot; long. This was no minor delamination. In addition, the glass around the stringer replacement delaminated quite a bit over winter as the board dried out in the den. I was working multiple issues, and I had no hands-on experience with any of them.</p><p>My first attempt at laminating the logo to the board didn’t pan out so well, partly owing to my failure to fully address the delamination problem well beyond the original area. And it turns out that the Morse Decals instructions glued to the foam bled through the tissue paper. I should have sanded that whole thing off, but I didn’t. The result is something like a double image of the logo, with some instructions showing through.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*SAggBTJ-4dBAyXuxGCc6qw.png" /><figcaption>Lots of work to reproduce a logo that didn’t come out so well.</figcaption></figure><p>I’m pretty disappointed with the final product. The lamination isn’t all that hot, and there’s a lot going on under the logo itself. C-, at best.</p><p>The good news — if there’s any good news in all this — is that the board is now solid.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*Dr2VeY1tXlppRw7F3Sq0cg.jpeg" /><figcaption>1967/8 Weber Feather, ready for the water</figcaption></figure><p>It’s not the most attractive repair. But I knew I was not taking on a restoration. The point of this project has always been to rehabilitate this vintage pintail and return it to the ocean. She’s ready to rock and roll.</p><p>I enlisted my daughter’s help in repainting the BLACK SHEEP label on the hull. We used acrylic paint, and I quickly hotcoated over it. It worked perfectly. And to help me spot my position on the board as I turn to drop in on a wave, I made good use of that golfball-sized hole by adding a little deck art.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*3XQNKyiYuXqIRbaAmzGYjA.png" /><figcaption>This lone eye will help me dial in my position.</figcaption></figure><p>I filled the deck hole with some left-over US Blanks foam and painted an acrylic eye over the patch before I hotcoated the whole board. I love it.</p><p>Once the whole thing was hotcoated, I decided to add a glass-on leash loop to give me the flexibility of primetime summer surfing without drilling into a vintage board.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*GAnpTsQKvrO1_mpE2gBogQ.png" /><figcaption>My first-ever fiberglass leash loop. Fin rope and resin. Easy and elegant.</figcaption></figure><h4>But How’s BLACK SHEEP Surf?</h4><p>None of the work here matters, really, if BLACK SHEEP isn’t surfable. So I took BLACK SHEEP out on May 25 for a couple sessions at my local break. In the morning, I paddled out for some clean 3–5&#39; waves in a crowded lineup.</p><p>In what has to be the ultimate coincidence, I ran into Charlie from <a href="http://mainesurfersunion.com/">Maine Surfer’s Union</a> in the line up. I’ve never seen Charlie at my local break before, but there he was for the clean surf. I made a point of telling him I was surfing BLACK SHEEP, but he had already noticed. We surfed together for awhile before I headed off to work.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*YILrptBaYsYR8cHYU-0Gmg.png" /><figcaption>BLACK SHEEP on the wall, waiting to paddle out for a memorable session.</figcaption></figure><p>That evening, I headed back out for 3&#39;+ sets that had become a bit disorganized by the shifting winds. There were only three people in the water, one guy on a fish, another guy on an SUP, and me on BLACK SHEEP.</p><p>This WEBER Feather is a board that represented the height of the longboard era, and it rides like it. It was probably shaped by Harold Iggy, the head shaper at Weber Surf Boards back in 1967. Solid, stable, and responsive, it has enough rocker to get me into a steeper face, pinched rails that hold in the face, and a tail that gives the 9&#39;6&quot; tons of maneuverability. I even got up near the nose a couple times.</p><p>I had thought BLACK SHEEP would mostly live in the rafters of my den, but I can’t put it back in the house. Instead, it’s in the shed on the shaping stands, waiting for the next session!</p><p><a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602#.lk8ypkn7g">Part I — A Documentary in Words and Images</a></p><p><a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.ui780w96s">Part II — Replace a T-Band Stringer</a></p><p><a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c#.u4suf42f8">Part III — Replace a W.A.V.E. Set Fin</a></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=cd2d21ec91f4" width="1" height="1" alt=""><hr><p><a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iv-reproducing-the-cd2d21ec91f4">Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part IV — Reproducing the…</a> was originally published in <a href="https://medium.com/vintage-surfboards">Vintage Surfboards</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Open Letter from the Editors]]></title>
            <link>https://medium.com/vintage-surfboards/open-letter-from-the-editors-71862e3b39d8?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/71862e3b39d8</guid>
            <category><![CDATA[publication]]></category>
            <category><![CDATA[vintage]]></category>
            <category><![CDATA[surfing]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Sat, 28 Nov 2015 14:15:51 GMT</pubDate>
            <atom:updated>2015-11-28T14:15:51.432Z</atom:updated>
            <content:encoded><![CDATA[<p>The online treatment of vintage surfboards is largely confined to e-commerce sites (auction houses or vintage board retailers) — whose primary purpose is sales — and discussion boards, where it is difficult for one to develop a thought that runs beyond a paragraph and where image embedding is fairly rudimentary. There are, of course, some great individual bloggers sharing words and images about their quivers or their projects. Without dismissing the important role of existing venues for sharing vintage surfboard information, we seek to create a different publication venue for older board stories. Medium is particularly well suited to this kind of writing.</p><p>We invite submissions from people with stories to tell about their older boards. We refuse to draw deep lines in the sand establishing firm rules about the meaning of vintage or the style of board that might be discussed. Although purists who date “vintage” at pre-1967 might object, we’ll consider publishing good stories (from any angle) involving boards that are, well, old enough for someone to consider vintage.</p><p>We launch the publication with a multi-part story about an ongoing board rehabilitation project. But we do not seek to confine this publication to restoration-style projects. Got a great vintage surfboard story to tell? Write it, reach out to become a writer here, and let’s get it published.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=71862e3b39d8" width="1" height="1" alt=""><hr><p><a href="https://medium.com/vintage-surfboards/open-letter-from-the-editors-71862e3b39d8">Open Letter from the Editors</a> was originally published in <a href="https://medium.com/vintage-surfboards">Vintage Surfboards</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part III — Replace a W.A.V.E.]]></title>
            <link>https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/c649c7b7652c</guid>
            <category><![CDATA[surfing]]></category>
            <category><![CDATA[vintage]]></category>
            <category><![CDATA[restoration]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Wed, 25 Nov 2015 19:56:41 GMT</pubDate>
            <atom:updated>2016-05-29T23:26:33.064Z</atom:updated>
            <content:encoded><![CDATA[<h3>Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part III — Replace a W.A.V.E. Set Fin)</h3><figure><img alt="" src="https://cdn-images-1.medium.com/max/625/1*CNt_K6QnErbgJtWcKd7OOA.png" /><figcaption>Close up of the Weber Feather’s stenciled, hand-painted name.</figcaption></figure><blockquote>This part of the documentary is the one most likely to be helpful to someone working on a vintage surfboard.</blockquote><p>In <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602#.4plfo5a48">Part I</a>, I explored the back story on my Weber Feather known as BLACK SHEEP. In <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.eoci392md">Part II</a>, I detailed the most challenging element of my rehabilitation adventure — t-band stringer replacement. Here I take up the challenge of replacing a W.A.V.E. Set fin.</p><h4>W.A.V.E. Set</h4><p>The late 1960s were an innovative period for surfboard design. Most people think of the shortboard revolution of 1967–68 as the most significant innovation since Tom Blake mounted a piece of aluminum boat keel to his surfboard and “invented” the surfboard fin. And those people are probably right.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1000/1*ixHdCZIqxB2ZrQVehlvbzg.jpeg" /><figcaption>Weber Performer Hatchet Fin, with Wonderbolt System (Source: <a href="http://www.swaylocks.com/forums/weber-performer-info">Swaylocks</a>)</figcaption></figure><p>Before shortboards emerged, however, there were a great number of other innovations, including experiments with interchangeable fin systems. Around 1965, Hobie Alter pioneered a short-lived, removable fin system that used a screw running through the deck to secure the fin. Dewey Weber, in 1966, innovated with the Wonderbolt system for the removable “Hatchet” fin developed for the Weber Performer. And then there was the Water Apparatus Vehicular Engineering (W.A.V.E.) Set fin system in 1967, which enabled surfers to choose from a number of designs.</p><p>My BLACK SHEEP Feather has the W.A.V.E. Set fin box. I was able to pick up the board because the original fin was broken roughly 4&quot; up from the base. In fact, the seller was quite specific about an estimate he had on a fin box replacement that would make the board ridable once more — $175. Putting aside the rotten stringer in the tail section and the dozens of dings, and even the open holes, the fin was really the issue. I may have misjudged the extent of rot in the board, but my eyes were wide open about the need to address the fin system.</p><h4>The Hunt for the Elusive W.A.V.E. Set Fin</h4><p><a href="http://swaylocks.com/">Swaylocks</a> is the known universe’s most comprehensive resource for board builders. It is not uncommon to find shapers who cut their teeth in the early 1960s active (and helpful!) on the forum, and just about every problem imaginable has been taken up at one time or another in Swaylocks. The forum’s search tool may not be so hot, but so many Google searches for solutions to a board problem point to the forums at Swaylocks. The W.A.V.E. Set fin box is no exception!</p><p>My first call went out to Juan Rodriguez at <a href="http://oneworldsurf.com/">One World Surf Designs</a>. Juan is probably <em>the single highest quality</em> source for a fiberglass replacement for the original plastic W.A.V.E. Set fin. If you want a fiberglass fin and want someone to do it for you, find Juan. Juan recommended I go with one of his reproductions of the Greenough (Stage 3, I believe) fins that was available for the W.A.V.E. Set box, though he also said he had the Feather’s original fin style in stock — if I wanted that fin. I filed this source away as a definite probability. The price, though steep at $150 plus shipping, was less than the fin box replacement estimate of $175, and the Feather would be unmolested.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/400/1*I2UU1ddWuyf0pllkxIOZig.jpeg" /><figcaption>One of xhoserx’s reproduction W.A.V.E. Set fins (on eBay sometimes)</figcaption></figure><p>I spent a little time on eBay to see if I might grab an original fin. There’s a seller in California (xhoserx) who makes a couple different W.A.V.E. Set fins from molds he cast from the originals. His plastic is apparently stiffer than the original, and the fins even have the W.A.V.E. Set logo molded into them. His fins come and go on eBay. Look him up if you want an O.E. grade reproduction. I filed this source away as another possibility that would look original.</p><p>With BLACK SHEEP still drying out and lots of dings to repair, I was in no real hurry to buy a single-purpose fin. After all, the fin is the last thing the board will need before heading out to the line up.</p><h4>Alternatives to Purchased W.A.V.E. Set Reproductions</h4><p>Back at Swaylocks, I kept reading old posts addressing the very problem I was having: What might one do with a W.A.V.E. Set box when one lacks the fin? The advice is all over the map:</p><ul><li>Swap it out for a modern box, as <a href="http://www.nynjsurf.com/forum/nowap./shapers_shack_surfboard_repair_restoration_and_shaping_tips/w.a.v.e._set_fin_box_replacement_35467.0.html">UNCLE!! in New Jersey</a> had done, especially if its destiny is the surf and not some museum. (This was my initial choice, really. But <a href="http://mainesurfersunion.com/">Charlie at Maine Surfer’s Union</a> turned my head around on that option because my fin box is solid.)</li><li>Don’t swap it out because that will kill any collector value, and you never know what the future holds. (It’s not a collector board, but why fix what isn’t broken when there’s already enough broken on this board?)</li><li>Use silicone to set a fin in the box. It should hold (apparently), and it can be scraped out if the board ends up becoming a collectible. (Smart thought. I spent a couple weeks pondering this suggestion, going so far as to do a little work to source modeling silicone because it’s supposed to be good for the application.)</li><li>Get a sheet of polyethylene (cutting board material) and shape the fin and base from it. (Even smarter thought, so I looked to source a 12&quot; x 12&quot; x 1&quot; sheet before I put the idea on the back burner.)</li><li>Build a mold and make a fin to fit. (Now, why didn’t I think of that? I’ll roll my own.)</li></ul><p>I surfed the Internet a bit to explore just how one makes a fin. Let me put this as simply as I can: Don’t try it at home! I have lost the site that tipped me AWAY from building my own glass fin, but it involves perhaps two dozen layers of cloth to get a modern fin base, careful foiling, and more. I’m one to roll up my sleeves and dig into a challenge —I love DIY — but this was not one I wanted to take on.</p><p>Then I ran into <a href="http://www.swaylocks.com/forums/waveset-fin-repair?page=1">mattwho’s 2014 Swaylocks post</a> about his efforts to make a reproduction W.A.V.E. Set fin. mattwho showed off his custom, glassed reproduction, asserting that one <em>should not attempt</em> to glass up a reproduction W.A.V.E. Set fin. But he also discussed his decision to glass a Yater fin <em>into the base</em> he had originally made for the W.A.V.E. Set box.</p><h4>Rolling My Own</h4><p>Building on mattwho’s post, I hatched an experiment that might both save me money and get me closer to my Weber Feather. I would get myself an inexpensive (probably used, possibly broken in the base, and maybe on eBay), modern fiberglass rake fin and use my resin blend based on Herb’s diaper mix (discussed in <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.eoci392md">Part II</a>) to pour a resin base and seat a modern fin. Brilliant!</p><p>Using a plastic shape I had laying around the shed, I poured an experimental mold roughly the size of a toilet bowl wax ring. This shape had roughly the width and depth of the base I’d need for the W.A.V.E. Set box, though I’d need a rectangle, not a donut. Once it had cured overnight, I put it on the edge of a curb and played mini seesaw on it with my full 190 pound frame. Then I drilled a hole in it to see how it would handle a fin screw. Herb was right. This stuff is tough!</p><p>After monitoring eBay for a few weeks, looking for a suitable used fin at a price point appropriate for a shoestring-budget experiment, I decided to take the plunge and buy one of March 21 Surfboards’ rake fins. I know their fins are the real deal because I own two of them: an 8&quot; rake fin with a pattern inlay that my daughter uses, and a 10&quot; pivot fin that goes on my Performer when the surf is miniscule.</p><p>The fin I bought was 9&quot; long, with a relatively narrow base that seemed appropriate for a 9&#39;6&quot; pintail. As with all of their fins, this one came with the screw and a sleeve. I would have preferred something a bit longer (9.5&quot;) and with even less volume throughout, but this was really an experiment and the fin seemed roughly appropriate to the board.</p><p>I sketched a plan to roll my own reproduction W.A.V.E. Set fin. I took down some of the fin’s base to get an acceptable angle because, unlike the modern fin box, the W.A.V.E. Set box gets pretty shallow towards the back.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*D4PFyc6Nfwgnq-qlCe_syQ.png" /><figcaption>Fiberglass W.A.V.E. Set fin reproduction curing in semi-shade</figcaption></figure><p>I lined the W.A.V.E. Set box with blue painter’s tape and waxed it up to aid in prying the cured base from the box. I poured in some of my blend, carefully seated the fin, and used my carpenter’s speed square and painter’s tape to get and hold the fin perpendicular to the board. I poured more resin blend into the box to fill it all up. Then I let things cure.</p><p>My Silmar resin has a UV cure additive, which is great because the outdoors becomes a relatively reliable way to control the kick — shade for a slower cure; fuller sun for a fast kick. I was stoked about my fin until a couple hours later, when I discovered that the resin wouldn’t cure <em>under</em> the fin because there was no light. As my daughter likes to say, “What a Noob!”</p><p>I quickly mixed some catalyst into my resin blend — not too much because I didn’t want to overheat the plastic fin box. I cleaned out the mess in the box, and worked the process again. A couple hours later, I returned to the board and gently pried the fin loose from the box.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*WdHy80bjuTQCMbmQKkk9Ng.jpeg" /><figcaption>Fiberglass resin base and 9&quot; Volan fin fits my Feather’s W.A.V.E. Set box as well as an original.</figcaption></figure><p>After waiting a couple days, I drilled holes in the fin base for my W.A.V.E. Set screws, used the grinder to clean the work up a bit, and popped the fin into the Feather’s box. Beautiful!</p><h4>The Verdict</h4><p>This DIY project cost me the price of a fin, plus about .25¢ in resin and some of Herb’s diaper fill. Not counting the resin cure time or the background research, I spent about 45 minutes on the project. Short of buying someone else’s W.A.V.E. Set fin (original or reproduction), I don’t believe there’s an easier way to do this.</p><p>The obvious drawback to this approach is fin placement. Accustomed to the ease with which modern fins can be positioned for the desired mix of stability and looseness, the contemporary surfer may find this “locked in place” positioning unsatisfying. But this is true of any W.A.V.E. Set fin reproduction.</p><p>Given the backyard manufacturing costs involved, there’s no reason not to work up a few of these fins. Position one back about 1&quot; and use it when conditions call for more hold in the wave face; build one with the fin up near the front of the box to loosen up turns. Or think of it a little differently: make a few of them with <em>different fins</em> and seat them in the center of the box, just like the originals.</p><p>It’s going to be a couple months before I finish rehabilitating the BLACK SHEEP Weber Feather and put it in the water. After I’ve surfed the board a bit, I’ll have a better feel for the kind of fin I want on it. If this 9&quot; rake fin isn’t right for the board, I’ll buy one that I think is right and build a second W.A.V.E. Set reproduction fin for .25¢, plus the cost of the fin.</p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602#.4plfo5a48">Part I — A Documentary in Words and Images</a></p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.r2r8su5l7">Part II — Replacing a T-band Stringer</a></p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iv-reproducing-the-cd2d21ec91f4#.sfr658fqb">Part IV — Reproducing the Weber Feather Logo</a></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=c649c7b7652c" width="1" height="1" alt=""><hr><p><a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c">Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part III — Replace a W.A.V.E.</a> was originally published in <a href="https://medium.com/vintage-surfboards">Vintage Surfboards</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part II — Replace a T-band…]]></title>
            <link>https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/e53355f2c8f6</guid>
            <category><![CDATA[vintage]]></category>
            <category><![CDATA[surfing]]></category>
            <category><![CDATA[restoration]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Tue, 24 Nov 2015 17:17:29 GMT</pubDate>
            <atom:updated>2016-05-29T23:25:53.072Z</atom:updated>
            <content:encoded><![CDATA[<h3>Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part II — Replace a T-band Stringer)</h3><figure><img alt="" src="https://cdn-images-1.medium.com/max/792/1*jPzb65vhgQ-cID8l7X0b7Q.png" /><figcaption>The BLACK SHEEP Feather’s rocker and blade-like nose, transitioning to a 3&quot; thick belly.</figcaption></figure><p>In <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602#.lk8ypkn7g">Part I</a>, I explored some background on Dewey Weber Surf Boards, the history of the brand in New England, and the design of the Weber Feather. In Part II, I tear into the tail of the BLACK SHEEP to replace a section of the t-band stringer. In <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c#.rquraw825">Part III</a>, I will explore one’s options for replacing a W.A.V.E. Set fin and document the production of my own reproduction fin.</p><h4>In for a Penny…</h4><figure><img alt="" src="https://cdn-images-1.medium.com/max/600/1*R1EJ2Gl-5apOSuxtmJPLvA.jpeg" /><figcaption>NYSEA Crew @ Jaws (Screen Grab from Footage by Ricardo Estevez) — <a href="http://www.nysea.com/nysea-crew-jaws/">http://www.nysea.com/nysea-crew-jaws/</a></figcaption></figure><p>I had been thinking I’d like to have a pintail longboard in my quiver because they can be a bit more responsive in turns and a little better in the bigger stuff. (There’s a reason every surfer trying to paddle over the 35&#39; Jaws clean-up set on the left is riding a pintail gun.)</p><p>I wasn’t thinking Weber, and I wasn’t actually in the market for a board when opportunity struck: an all-original Weber Feather with significant water staining, a golf ball-sized hole on the deck, a broken W.A.V.E. Set fin ($150 to replace), and a really, really nasty cavity right at the pin. I picked it up for next to nothing, thinking I’d swap in a modern fin box, clean up the tail, patch up the big stuff and dozens of smaller issues, hang it in the den, and surf it on occasion. In for a penny…</p><p>I strapped the Weber Feather on my roof and raced home to give it a more thorough inspection. I was too excited about the prospect of managing a couple dozen minor dings and a few more serious punctures. I grabbed my grinder and ripped into the dings on the deck before realizing that I was really in for a long-haul recovery. The stringer was completely shot from at least the back of the fin box to the tail. I knew I needed to handle two delaminations, a good-sized one right over the Weber Feather logo and a smaller one a few inches back.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*4o47rbru8GjXsthHo4yJDg.jpeg" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*RPSY0VnuV25ges8h8v3BtQ.jpeg" /><figcaption>Left: Don’t surf where golfers use the beach as a driving range. Right: Why yes, that is a completely disintegrated t-band in the pintail, with goo you don’t want in your board.</figcaption></figure><p>As the photos show, his board needed work. But look at that patina. And the glass is hard as a rock, at least where it isn’t dinged or mangled.</p><p>I handle all of my ding repair, and I’ve done a little nose reconstruction, rail repair, and fin box work. I’ve also hotcoated/glosscoated a couple boards after a significant quantity of ding repairs. But all of that is work I’d consider pretty run-of-the-mill. This Feather recovery is orders of magnitude more challenging.</p><p>Fortunately for me, there’s this little thing called the Internet, where one can sort of learn how to do almost anything. And I needed to learn a lot!</p><ul><li>How does one replace a 1.5&quot; deep gouge in the deck?</li><li>What’s the best way to handle a deck delamination that traverses the stringer?</li><li>Is it possible to replace part of a stringer? What’s the penalty in terms of susceptibility to future breakage?</li><li>How might one replace a faded original logo with one created in Photoshop?</li><li>What’s the best approach to handling a W.A.V.E. Set fin box when the box is not cracked/leaking but the fin is broken? Remove? Keep?</li><li>Assuming the fin box stays, what are one’s options on a fin?</li></ul><p>The list of sites I consulted is quite long, but much of the information I found helpful was contained in three distinct places: the forums at <a href="http://www.swaylocks.com/">Swaylocks</a>, <a href="http://www.nynjsurf.com/">NYNJSurf</a> forums, and <a href="http://classicbingsurfboards.com/">ClassicBingSurfboards</a>.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/125/1*2Y-JUL8Nqwj8CbBkA1fpqQ.png" /><figcaption>36 Market St. Talk to Charlie!</figcaption></figure><p>I also drove the board up to one of our local shops, <a href="http://mainesurfersunion.com/">Maine Surfer’s Union</a>, and consulted with Charlie about getting a pro to handle the stringer repair and possible fin box replacement. At the time, I thought the rot was confined to the back 4&quot; of the board and was looking at simply swapping in a modern fin box.</p><p>Charlie, sensing (rightly) that this stringer thingie could unravel like a loose thread on a sweater, gently encouraged me to clean up the tail, dry out the board, glass in some wood, and call it a day. He also confirmed my sense that the W.A.V.E. Set box was in great shape, with good glass all around. Charlie wondered why I’d replace the vintage box when I could find a reproduction fin? Keep the board as close to original as possible. He walked away from a job, but he also walked away from <em>work.</em></p><p>I’m glad he did! Keeping the board in house meant I spent next to nothing on the repairs — a little balsa, some glass cloth, a bucket of resin. (Including the volan fin I bought, the repair bill is well under $50 so far. Forced to dig into the stringer problem myself, I have also developed considerably more confidence in my ability to handle board repair — not that I’m efficient or particularly good.</p><h4>… In for a Pound</h4><p>What I saved in money by handling repairs in the shed and back yard, I made up for in time on task. But these are off-hour hours, and they come in small increments: 15 minutes here, an hour there.</p><p>Using my grinder, I quickly opened up some drainage/evaporation slits in the deck. A series of roughly 4&quot; long cuts through the glass on either side of the stringer made it possible to pop up some glass and expose the t-band, helping me diagnose the extent of water damage to the stringer and enabling the wet (but still solid) wood to dry out. I then moved the board to the den, where the wood stove and low humidity of a Maine autumn could work out the moisture.</p><p>The real problem with the board, though, was that pesky rotten tail. As I worked my way up the board, slicing the glass away from the stringer section, I found more and more wet, rotted balsa pulp. The black foam was solid, as was the white foam making up the board itself. But roughly 18&quot; of t-band wood was completely shot. I carefully scraped out the wet mess, leaving long 1/8&quot; grooves on either side of the black foam.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*8XVvaQyXT09moBHywygPJw.jpeg" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*JLPOO8X2-5b0EXW-Lelzqg.jpeg" /><figcaption>Left: Cut out rot (I ended up cutting out the glass all the way back to the tail to fix the stringer); Right: Close-up of black foam, with disintegrated balsa removed.</figcaption></figure><p>UNCLE!! at NYNJSurf Forums, one of my sources for basic guidance, <a href="http://www.nynjsurf.com/forum/nowap./shapers_shack_surfboard_repair_restoration_and_shaping_tips/w.a.v.e._set_fin_box_replacement_35467.0.html">documented his removal of a W.A.V.E. Set fin box from a vintage G&amp;S and installation of a modern box</a>. One of his images reveals that G&amp;S used <em>duct tape</em> to cover the hole that an overzealous crank of the W.A.V.E. Set screws might create. He also points out the deck foam staining over the screw locations on that Model SS. Not so funny stuff.</p><p>This information sent me to the deck of the Feather, with orders to ferret out any signs that fin box leakage would need to be addressed. Thankfully, I saw no evidence that the box itself had failed.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*PPpq4tsiLNdyqFRqWTvjRQ.jpeg" /><figcaption>Likely W.A.V.E. Set installation spec: Use duct tape to cover area above fin screw holes.</figcaption></figure><p>As I dug out wood pulp, then carefully (oh, so carefully!) pried the black foam from the board, it became clear to me that duct tape was almost certainly part of the <em>official installation instructions</em> for the W.A.V.E. Set fin box.</p><p>How far should one go to address this stuff? I reminded myself that this is <em>not</em> ever going to be my main board and that the board has been surfed for more than 40 years with a duct tape seal. I elected to gingerly clean out the grime and glass everything in nice and tight.</p><p>Notice that small, square cavity in front of the duct tape. Curious. It provides stability for the box, enabling it to handle some impact forces. I could imagine someone using it to smuggle diamonds or some other small, valuable contraband through customs. The enterprising smuggler could have cut out the glass, inserted the goods, glassed it, and thrown on some wax. Hmm.</p><p>After assessing the stringer damage and cutting out the black foam, I scoured the Internet for help on stringer replacement. There are a number of sites that document stringer repair as part of surfboard restoration. It looks like a daunting project.</p><ul><li><a href="http://davidplattsurfboardrestorations.blogspot.com/">David Platt’s Restoration of a Gordon Woods</a> classic will send almost anyone running away from a restoration job and into the arms of a pro.</li><li>Tom at <a href="http://classicbingsurfboards.com/bing-surfboards/classic-bing-restorations/">Classic Bing Surfboards</a> documents glass-off restorations of a couple Bing boards, one of which included a serious, wide balsa stringer replacement.</li></ul><p>Looking at these projects made my stringer replacement task seem pretty easy, at least relative to the work of surfboard restoration. I didn’t want to strip the glass and re-build the Feather from the foam up. I just needed to reconstruct about 18&quot; of t-band, shape the contours to match the board’s rocker, glue it all together, and re-glass the section.</p><p>Turning again to Swaylocks, I learned about White Gorilla Glue, a water-activated, expanding, waterproof adhesive. At my local crafts supply store, I picked up a couple lengths of 1/8&quot; balsa and some Gorilla Glue. Using the carefully extracted black foam from the t-band as a template, I cut the balsa to reproduce the rocker template of the Feather’s tail. The foam in the pin was beyond recovery, so I used some cast off foam I got from <a href="http://mainesurfersunion.com/">Charlie at Maine Surfer’s Union</a> and shaped a white-foam section at the end.</p><p>I sandwiched the foam between my two 1/8&quot; balsa sections and mated it all with Gorilla Glue. Not realizing just how expansive and foam-like the Gorilla Glue would be, I used a bit too much glue, which created something of a foamy mess requiring a good bit of shaving and scraping once it all dried. I’m really happy with the construction.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*8ny0k5MK6R_BAVQi_Ji8Aw.jpeg" /><figcaption>Replacement t-band section, all glued up and ready for installation.</figcaption></figure><p>I used a “proprietary” resin-filler blend developed using <a href="http://www.swaylocks.com/groups/exo-fiberfiller">Herb’s diaper mix</a>. (Thanks, Herb and Swaylocks!) The filler enabled me to accommodate the highly imperfect stringer outline without needing to cut through the glass on the deck <em>and </em>hull. I was not interested in building a super jig to hold the board in place to prevent twisting, and I didn’t want to break the fin box loose from its moorings.</p><p>I was also able to really goop my blend over the fin box and into whatever nooks and crannies existed between the box and the foam. Functioning like a mix of microballoons and shredded cloth fibers, the blend also bonded foam to wood. My hope is that this mix will make the duct tape over the fin box screw holes irrelevant.</p><p>Below are a couple photos of the repaired stringer section. I used black acrylic paint to match the black foam color all the way back to the pin. I’m not glassing the tail stringer section until the entire board is ready for glassing. I’d give myself a B-/B on my first-ever effort at touching a surfboard stringer.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*08C0VmqxEgRZyUjtxF8OiQ.jpeg" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*5VWlPT7-dzEbqYuPTZ9tvg.jpeg" /><figcaption>Left: T-band section secured into the board (Note the White Gorilla Glue in the black foam); Right: Pin section painted, along with small glassed section filling a wood gap.</figcaption></figure><p>If I could handle this work again, I’d probably find some way to clamp the glass to the foam on either side of the stringer opening. After cutting out the rotten t-band and drying the board inside for months, the glass delaminated a bit on one side. I’m not worried about this repair, really. But it might have been avoided with a couple clamps. I now understand why David Platt has about <a href="http://davidplattsurfboardrestorations.blogspot.com/">a dozen clamps</a> on the nose of the Gordon Woods during a delamination repair. (That’s one difference between an amateur and a professional!)</p><p>The stringer replacement is, without a doubt, the most challenging part of this rehabilitation project. It may be a long road from here to the swell, but it’s all downhill!</p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602#.lk8ypkn7g">Part I — A Documentary in Words and Images</a></p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c#.u4suf42f8">Part III — Replace a W.A.V.E. Set Fin</a></p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iv-reproducing-the-cd2d21ec91f4#.sfr658fqb">Part IV — Reproducing the Weber Feather Logo</a></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=e53355f2c8f6" width="1" height="1" alt=""><hr><p><a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6">Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part II — Replace a T-band…</a> was originally published in <a href="https://medium.com/vintage-surfboards">Vintage Surfboards</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part I)]]></title>
            <link>https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/d27123cbe602</guid>
            <category><![CDATA[new-england]]></category>
            <category><![CDATA[surfing]]></category>
            <category><![CDATA[restoration]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Tue, 24 Nov 2015 17:16:55 GMT</pubDate>
            <atom:updated>2016-05-29T23:23:19.598Z</atom:updated>
            <content:encoded><![CDATA[<p>This is a story about my ongoing effort to rehabilitate a 9&#39;6&quot; Dewey Weber Feather. Affectionately named BLACK SHEEP for some reason I am still trying to track down, this Feather clearly had a rough decade or two before I picked it up. It’s not a candidate for a legitimate restoration.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*RlceBxPlVRSQvVgNcE4iUw.png" /><figcaption>1967 Weber Feather (BLACK SHEEP)</figcaption></figure><p>In 1967, <a href="http://deweyweber.com/">Dewey Weber Surf Boards</a> (yes, two words) came out with a longboard called the Weber Feather. The Feather shared some of the features of the company’s wildly successful Performer model, the most popular surfboard in history.</p><p>The Feather married the wide, blade-like nose, basic rocker, and pinched 60–40 rails of the Performer with a tight pintail and subtle hips that evoked the Velzy Pig shape. It came with a range of stringer options, including, by 1968, a stringerless version known as the Feather Lightweight. Together, the pin and hips made the Feather quick and relatively easy to turn for a board 9&#39;+ long and weighing over 25 pounds. It was designed to work well at beach breaks, making it a great candidate for New England surf.</p><p>Of course, 1967–68 also marked the start of the shortboard revolution, a decades-long fascination with shorter and lighter boards that decimated many established California surfboard manufacturers. The Feather launched into the headwind of this revolution. I don’t know how many Weber Feathers were made, but it didn’t stay in the Weber catalog much beyond 1968. The Feather Fastback and Ski soon emerged and quickly moved to the front of Weber’s catalog, as longboards all but disappeared from shaping bays.</p><p>Dewey Weber, nicknamed the little man on wheels for his diminutive stature and hot dog surf style, was one of the most enterprising of California’s surfboard manufacturers. His was perhaps the first company to establish a dealer network up and down the Atlantic seaboard, including surf shops in Massachusetts, New Hampshire, and Maine. Supported by a globetrotting team of world class surfers outfitted in matching team gear, the Weber brand was well established in late-60s New England beach communities. In the 1960s, surfing contests were a regular part of beach life in towns like York and Ogunquit, Maine.</p><p>As documented in <a href="http://www.eastcoastsurfinghistory.com/510249/surfers/">Mike Tabeling’s East Coast Surfing History</a>, Linda Peters and Stevie Byrne rode Weber Performers in Maine surf contests in the late 1960s. Several of the photos in Tabeling’s history show the evolution of the Performer, and Dewey himself makes a cameo appearance alongside Byrne in one photo. With the company’s founder in Maine to promote the board, it’s clear that marketing and product placement were at least as much of the story behind the Performer’s success as was the performance of the board itself.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*KmrL3Bkykrpa6C4QYbm40w.jpeg" /><figcaption>Weber Feather BLACK SHEEP, after a cursory inspection with a sander in hand. That hole in the tail is a bad omen!</figcaption></figure><p>My Feather likely made its way to New England in the late 1960s through this extensive dealer network, though it’s impossible for me to know the board’s provenance. It either never had a serial number, or time and neglect have conspired to erase it from the foam and disintegrated portions of the t-band stringer.</p><p><a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-ii-replace-a-t-band-e53355f2c8f6#.noniy8hoq">Read Part II — Replacing a T-band Stringer</a></p><p>Read <a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iii-w-a-v-e-set-fins-c649c7b7652c#.co33hgqmp">Part III — Replacing a W.A.V.E. Set Fin</a></p><p><a href="https://medium.com/@michaeljcripps/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-iv-reproducing-the-cd2d21ec91f4#.sfr658fqb">Read Part IV — Reproducing the Weber Feather Logo</a></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=d27123cbe602" width="1" height="1" alt=""><hr><p><a href="https://medium.com/vintage-surfboards/vintage-surfboard-rehabilitation-a-documentary-in-words-and-images-part-i-d27123cbe602">Vintage Surfboard Rehabilitation: A Documentary in Words and Images (Part I)</a> was originally published in <a href="https://medium.com/vintage-surfboards">Vintage Surfboards</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Teaching Online]]></title>
            <link>https://medium.com/@michaeljcripps/teaching-online-77ad80f14c07?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/77ad80f14c07</guid>
            <category><![CDATA[teaching]]></category>
            <category><![CDATA[demo]]></category>
            <category><![CDATA[online]]></category>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Tue, 09 Jun 2015 12:58:30 GMT</pubDate>
            <atom:updated>2015-06-09T12:58:30.832Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/960/1*StezY7CQIAUbte0t3viV_w.jpeg" /><figcaption>Screen Capture from Pink Floyd’s “The Wall” (<a href="http://www.taringa.net/posts/imagenes/5897885/Arte-Visual-de-The-Wall.html">http://www.taringa.net/posts/imagenes/5897885/Arte-Visual-de-The-Wall.html</a>)</figcaption></figure><p>Online classes are wonderful in many respects. They afford students (and teachers) considerable flexibility. Almost all interaction occurs through writing, which can be a good thing in a writing class because practice is essential to development. And they don’t necessarily mean everybody is alone. As a writing teacher, though, I hunger for synchronous interaction, for a voice on the other end of the teacher-student dynamic, and for more spontaneity than I often experience in online teaching. This hunger helps to explain my choice of image. Pink, the main character in the film, is trapped behind a wall and wonders, “Is there anybody out there?”</p><p>One of my biggest frustrations, really, is the slow-motion pace of discussion or interaction. I take the asynchronous component of online courses quite seriously, mostly because I know that online students are busy with other aspects of life and need the flexibility to do the work when it fits their schedules. But this usually means that “discussion” evolves over a twenty-four hour period. Begin with some questions to consider, write some responses, give everyone a reasonable time to do that work. Then comb back through and engage with peers. It’s ok, but I long for more spontaneity.</p><p>So I like to offer video/audio conferences. They’re always optional because of the asynchronous nature of the online course. But I do think they help to humanize the teaching-learning dynamic. Where email text and written instructions can easily be misinterpreted, leaving people confused or troubled about something, the conference provides the immediate opportunity to guage understanding, to answer questions, and more.</p><p>I’m still learning, of course, and online education is undoubtedly still in its infancy. There can be no doubt that the tools are getting better. When I first taught an online class (2002), video or audio conferencing was mostly a dream. Bandwidth ensured that interaction would be limited to some forums, maybe blog posts, email, and some comments on a Word document. Google Docs enables collaborative writing, video chat is pretty straightforward, and things continue to evolve.</p><p>I do like to step back and ask if my students in online classes seem to be developing in ways their face-to-face counterparts develop. I was confident that the answer was “yes” the last time I taught online. Despite my reservations about interactivity in online environments, I have to accept that growth and learning are the end game here. So I continue to work at the online side of education.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=77ad80f14c07" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Surf Lessons: Take It From a Novice]]></title>
            <link>https://medium.com/@michaeljcripps/surf-lessons-take-it-from-a-novice-de5d98fbd9f5?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/de5d98fbd9f5</guid>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Thu, 16 Oct 2014 15:41:13 GMT</pubDate>
            <atom:updated>2014-11-20T13:59:46.433Z</atom:updated>
            <content:encoded><![CDATA[<h2>Surf Lessons</h2><h3>Take It From a Novice</h3><p>“Catch a wave and you’ll be sittin’ on top of the world.” That Beach Boys line sums up the feeling that can accompany a sweet ride down the line. Behind that experience, however, lurks a whole set of behaviors and lessons that, together, enable one to ride a wave. Many of these lessons are not really taught at surf school or camp, yet they must be learned.</p><p>In some respects, I’m offering a “top 10” list of lessons. But my list isn’t the standard list of surfing tips. There’s no “three steps to popping up” lesson here. Instead, I offer what seem to me to be pretty important “larger” lessons about learning to surf, only some of which you’ll encounter in surf lessons.</p><p>Dismiss my lessons as off-base, echo them by offering your own take, or dig deeper to add sub-lessons.</p><p>I rode my first “official” waves on Father’s Day this year. Over the next 90 days, I spent roughly 175 hours in the water, paddling around, paddling into waves, popping up, wiping out, <em>and riding waves. </em>Truth be told, I’m fudging a bit because I tried to surf in late 2013 and stood up a few times. But I had my first “sittin’ on top of the world” experience on Father’s Day.</p><p>Since then, I’ve been in the water to surf at dawn, dark, sunset, and midday, ridden at high, mid, and low tide, paddled into one-foot ankle biters on flat days and head-high breaks with onshore breezes and chop. On many days, I have been in the water twice: at dawn and after dinner. I’m still very much a novice (kook?), but I’m learning every time I’m around a board.</p><h4>One: Repair is Part of Surfing.</h4><p>If you ride, you <em>will </em>ding your board. Your board is your tool. If you’re afraid to ding that custom shaped and tinted longboard, hang it on the wall.</p><p>Learn how to handle at least the basic repairs on your own. This will save money. More importantly, it strengthens your relationship with your board as you come to know the nose, the rail, and the tail, the glass, the color, and the foam, and the ways that each part contributes to the overall function of the tool. Doing the repair yourself probably means you’ll be back in the water sooner than if you put the board in the shop. And time spent fixing your dings helps you appreciate the value of making good choices when you’re in the water.</p><p>There are exceptions. Color-matching tints, fin box repairs, and major damage are probably best handled by those who repair boards <em>for a living.</em></p><h4>Two: Surfing is about Work and<em> R</em>est.</h4><p>Surfing is as much about back, neck, arm, and abdomen strength as it is about balance and timing.</p><p>Most of your surf time is spent paddling: out, in, around, over, slowly, quickly, powerfully. And the whole time, you’re arching your back a bit, holding your head off the board to look around and see what’s coming. Surf and you will be sore. Surf regularly and you will get stronger.</p><p>Paddling out past the shore breaks on anything but the smallest days will fatigue you, and committed paddling into a wave will drain you a bit. On many occasions, I have come close to catching a wave, immediately tried to nab the next one, and found myself lacking that final punch needed to get into the wave.</p><p>Perhaps unsurprisingly, rest in the lineup is good for both social relations and muscle recovery. Take a wave when your mind, body, and spirit are ready to commit.</p><h4>Three. Like a Good Tool, a Surfboard can be a Weapon.</h4><p>My longboard, plus the leash, puts any other person within a twenty-foot radius in danger if I lose control.</p><p>If my twenty-five pound log hits someone as it approaches the limit of my leash, the situation could get very ugly – and fast. (And I’m not talking about damage to the board, which could also be ugly.)</p><p>So I try to surf where I’m less of a danger to others. In a crowded line up, find me off to the side a bit. Does it cost me the best waves? Sometimes. Do I need the overhead surf when there are plenty of chest high waves to be had down the beach? No.</p><h4>Four. Longboards are Versatile.</h4><p>The longboard has an effective range that includes 90% of the surf most of us encounter. They don’t do as well when the surf gets much over about five feet. Depending on the break, of course, a longboard is more prone to pearling on a drop in as the wave gets larger – and steeper. I know that some can ride overhead surf on a longboard. I’ve even done it. Paddle in early on a more gentle break and it’s a lot of fun.</p><p>But I’ve also pearled so badly on chest and head high surf that I feared the nose of my board hit bottom. This leaves me scrambling to search for the damage while trying not to get pounded by the next wave.</p><p>The flipside is that you can have a great session in two-foot surf on a longboard, and you’ll probably have the surf mostly to yourself.</p><h4>Five. End on a Nice Ride and the Feeling Lingers.</h4><p>As a novice, I can only guess that this is what it means to be “stoked” after a session.</p><p>It’s not always possible to end on such a high note, but it is truly wonderful when it happens. The hard paddle out, the wipeouts, the missed waves, and cool chill of a flushed wetsuit all drop away as your entire being tingles from the experience of that last ride.</p><h4>Six. Your Board Can Be a Danger to You.</h4><p>Foam is soft but the hard fiberglass coating that makes it a durable wave machine can leave a nasty lump on your head or bruise (or even break) a limb. Get clobbered and a concussion is most definitely <em>not </em>out of the question. It’s no fun being dazed and clawing for your board as the surf seems to want to drown you. I’m nursing two nasty scrapes on the shin of my back leg, and all I did was lose my footing and bang my leg on the tail of my board while dropping into a wave.</p><p>Those fins that hold your line and help you control turns are really knife-like objects just under your back foot. Slip off in the wrong way at the wrong time and you can quickly start leaking hemoglobin. I sliced the ball of my foot on a fin back in mid-July; the skin has grown back, thankfully, but I’m acutely aware of that scar-knot every time I use the ball of my foot to turn the board.</p><h4>Seven. Board shorts and Surf Shirts are Functional Attire.</h4><p>Surf shorts aren’t a rebellion against the Speedo. Surf wax works a bit like hot wax applied to the chest or legs, but it works more slowly and less effectively. Surf in shorts and no shirt, and the wax <em>will </em>remove the hair from your chest and the insides of your legs. I wear board shorts and I still have a smooth “wax job” where my legs straddle the board.</p><h4>Eight. Dawn Patrol on the East Coast is Wonderful.</h4><p>Rise in the dark, hit the water as dawn breaks on the horizon, and have the Atlantic all (or mostly) to yourself.</p><p>There’s a quiet camaraderie in the wee morning hours, especially when the surf is average. It can be early morning mayhem when the break is firing, but most days are truly wonderful.</p><p>This is not unlike any morning exercise routine. The committed (and those who perhaps should be committed) are out doing their thing. They do it for themselves. And there’s a lot to be said for a day that includes surf, stoke, and work, all in that order.</p><h4>Nine. Night surfing.</h4><p>Surfing after sunset is really, really fun. But I don’t recommend it unless the moon is out. It’s just too hard to see the waves, to time your paddle, and even to tell what you’re riding once you’re on the wave. Put these elements together and you have a recipe for missed waves and wipeouts that are more likely to produce injuries. The only time I really clocked my head on my board was at night. I couldn’t see anything.</p><p>But clear skies and a full moon can make for a great session.</p><h4>Ten. Surfing is One of the Hardest Things to Learn.</h4><p>Every component of the surfing experience is moving, and it requires a whole portfolio of skills: balance, weight distribution, specific fitness, timing, position on the board and in the wave, and much, much more.</p><p>The “ground” shifts underneath you, changes from break to break, day to day, and wave to wave. Subtle positioning on the board can mean the difference between catching the wave, pearling, or not getting into the wave. Getting it right on one wave is no assurance that you’ll get it right on the next one. And getting into the wave is only the beginning.</p><p>The popup demands fluidity, speed, and precision in timing, position, and balance. Once up, fore, aft, and side-to-side movements must be calibrated to the size, shape, and speed of the wave, as well as to your position on the wave. And turning the board introduces a whole new set of variables to the equation, each of which must be calibrated on the fly if you’re not to bury the rail, sink the nose, fall off the side, or worse.</p><p>Like anything, though, practice brings gains. The gains come in very small increments, may not be immediately replicable given the shifting surf conditions, and will include considerable backsliding along the way.</p><p>But those small gains are all the more pleasurable <em>because</em> they are so hard to make.</p><p>That’s it. Ten lessons in under ten minutes, all from a novice.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=de5d98fbd9f5" width="1" height="1" alt="">]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[The Literate Surfer]]></title>
            <link>https://medium.com/language-lingustics/the-literate-surfer-4d3b3040e925?source=rss-6419553b9b00------2</link>
            <guid isPermaLink="false">https://medium.com/p/4d3b3040e925</guid>
            <dc:creator><![CDATA[Michael J. Cripps]]></dc:creator>
            <pubDate>Sun, 24 Aug 2014 22:54:03 GMT</pubDate>
            <atom:updated>2014-08-26T09:44:13.845Z</atom:updated>
            <content:encoded><![CDATA[<p><em>by Sam B. Awklamb*</em></p><p><em>It’s Sunday night and we’re driving home from a lackluster session. We’d settled on a spot just down the point from a better-known wave. And sometime, around sunset, the packed-in lineup had grown tense all because of one kid… shaved head, garishly colored wetsuit, his board covered in stickers for companies I’ve never heard of… The break itself was nothing to get territorial about… Clearly he thought it was his break… because he’d spent the whole session backpaddling the lineup… He’d waste whole waves spastically pumping up and down the line, all in service to these little credit card airs… (Brad Melekian, “Kook,” </em><a href="http://www.surfersjournal.com/">The Surfer’s Journal</a><em>, Winter ‘14)</em></p><p>What makes a surfer literate? Is it mastery of the lingo, the terms or specialized jargon of the community? Deploying terms like point, break, lineup, backpaddling, airs, closeout, and session in the right ways — and at the right times — is certainly part of it. But talking the talk can’t be all there is to surfer literacy.</p><p>In his 2014 essay “Kook,” Brad Melekian stumbles into this question of surfer literacy as he and his buddy debate the definition of “kook” in front of the <a href="http://en.wikipedia.org/wiki/Cardiff_Kook">Cardiff Kook</a>, a statue in Cardiff-by-the-Sea:</p><blockquote>Melekian: Man, that kid was a kook.</blockquote><blockquote>Buddy: What are you talking about? The kid who was cutting everybody off? He was a jerk, for sure, but he could surf alright.</blockquote><blockquote>Melekian: What’s that got to do with anything? Whether or not he could surf?</blockquote><p>For Melekian, this brief exchange becomes the focal point for a meditation on the meaning of a basic term within the surfing community. Is the term “kook” reserved solely for newbie surfers? Does it encompass something larger? We take this exchange — and Melekian’s meditation — as an opportunity to consider literacy through the lens of the surfer community.</p><p>James Paul Gee, a linguist and member of a group of scholars shaping a discipline called “new literacy studies,” sees literacy as involving mastery of something he calls a Discourse — with a capital D. In expressing the characteristics of a subcommunity, what Gee calls a secondary Discourse, “Kook” enables surfers and nonsurfers alike to consider what it means to be literate. And the central role of the “Cardiff Kook” in Melekian’s essay sheds light on ways that elements of a Discourse can change.</p><p>Discourses are a part of how we think, act, feel, speak, and believe. In “Literacy, Discourse, and Linguistics: Introduction,” Gee describes Discourses as an “‘identity kit’ which comes complete with the appropriate costume and instructions on how to act, talk, and often write, so as to take on a particular role that others will recognize”(7). For Gee, there are two divisions of discourses, primary and secondary, and both emerge over time. A primary Discourse is the foundation of one’s beliefs, actions, attitudes, and values. It is the first set of interactions one has with the world and encompasses that person’s family and peer group as a young child (Gee 7–8). A secondary Discourse involves the addition of characteristics that are shared among a similar group, outside of their primary Discourse.</p><p>Gee’s ideas of a secondary Discourse are illustrated in Melekian’s “Kook”. According to Gee, “failing to display an identity is tantamount to announcing you don’t have that identity, that at best you’re a pretender or a beginner” (10). For Melekian, kook is a “derogatory term for those who wouldn’t understand just how far on the outside they were” (15). The “kook” in Melekian’s essay, with his “shaved head, garishly colored wet suit,” was trying to fit into the surfer community. He had stickers and Sharpie all over his board, and he was cutting in front of people to make sure that he got to ride the wave; in doing so he failed to exhibit proper surfer etiquette. He is proficient at surfing, to be sure. Melekian’s buddy noted that “he could surf.” However, many of his actions show that he is pretending to play the part of a real “surfer community member.” Unfortunately, that’s all he really can do, because he is not literate in the surfers’ secondary Discourse.</p><p>Illiteracy leads to conflict between the kid Melekian labels a kook and the other, presumably literate surfers in the lineup. He is breaking the “rules” of the Discourse due to his lack surfer etiquette. He fails to bring together the “<em>saying (writing)-doing-being-valuing-believing combination</em>s” that Gee sees as markers of one’s membership in a Discourse (6). The kook’s inability to make these combinations fit together prevents him from being accepted into the surfer discourse.</p><h3>What is a Kook?</h3><p>The surfer culture of Melekian’s essay is a secondary Discourse. Melekian’s kook makes a bad impression on the natives by coming off as rude and uncaring. He has not mastered how to act like a surfer and therefore comes off as someone Gee might call a “mushfaker.” According to Gee, a “mushfaker” is someone who makes “do with something less when the real thing is not available” (13). As the “mushfaker” tries to express that he is an experienced surfer, he unintentionally pushes himself farther out of the surfer community by not knowing the proper surfer etiquette and surfer style. His overcompensation for his position outside the community comes through an attempt to express a sense of superiority. When one of the surfers in the lineup grows tired of being cut off — again — and challenges the kid, the kook comes right back at him:</p><blockquote><em>Surfer: Did you not see me? Or do you just not care?</em></blockquote><blockquote><em>Kook: Don’t care.</em></blockquote><p>What makes one a kook? For Melekian, “kookdom” is based off of a lack of participation in common values. For his buddy, it is based on skill: A kook is a person who cannot surf. As Melekian sees it, divergence from the surfer community’s norms and beliefs makes one a kook or kooky. In expressing kookdom as an either-or — it is either defined in terms of values or in terms of skill — Melekian’s essay overlooks the importance of both elements in determining literacy. Literacy involves behaviors (including skill) <em>and </em>values.</p><p>Both Melekian and his buddy are right, but both are also wrong. The kook does not have the literacy Gee discusses, the “fluent control” or “mastery” of this discourse, because he isn’t bringing the right “<em>saying (writing)-doing-being-valuing-believing” </em>combination. As Gee puts it, “Someone cannot engage in a Discourse in a less than fully fluent manner. You are either in it or you’re not” (9). Being “in it” requires one to bring all elements together.</p><p>At the same time, the fact that Melekian and his buddy can deliberate (and disagree) about whether the kid was really a kook — effectively debating the very meaning of the word — surfaces a limitation in Gee’s the view of Discourse in “Literacy, Discourse, and Linguistics: Introduction.” The debate over the meaning of “kook” in Melekian’s essay reveals an important instability within elements of a Discourse. Gee’s “in it or not” framework has no room for this instability and any deviation from the discourse would stand out to others and brand you as a “pretender”. There’s no evidence that Melekian or his buddy are pretending to be in the Discourse or that they are mushfaking, yet on the matter of “kook” they clearly have different “<em>saying (writing)-doing-being-valuing-believing combinations.</em>” Melekian’s article “Kook” is a prime example of Gee’s idea not being flexible enough.</p><p>By acknowledging that the rules of a Discourse allow for these small degrees of variation, the concept becomes malleable in ways that enable it to better describe events. Those literate in the Discourse participate in “saying-doing-being-valuing-believing combinations” that are not locked in. These viewpoints will be passed around its members and influence their beliefs in different ways. Melekian’s essay offers the reader a window into this intra-Discourse negotiation.</p><h3>Malleable Discourse and the Cardiff Kook</h3><p>Created by sculptor and surfer Matthew Antichevich, the “Magic Carpet Ride” was placed along Highway 101 in Cardiff-by-the-Sea in 2007. The creation of the statue was to acknowledge the area’s attraction to beginner surfers and to represent the happiness and clumsiness of beginner surfers. Although the statue was made for the area’s attraction, immediately residents of the town shunned and disliked the statue. People believed the statue did not look enough like a surfer. It looked more like a ballet dancer than a rider of the waves. The statue’s the poor representation of the ‘true’ surfer form led to the locals naming it the “Cardiff Kook”. It could be the limp wrists, the strange posture, or the portrayal of the boy riding a small spray rather than an epic wave that led locals to rename the statue.</p><p>Though created by a Cardiff local, the “Cardiff Kook” is an example of an outsider. The townspeople did not want this statue in their hometown. As Melekian writes, “The [Cardiff] Kook had affronted their insider-dom, had punctured a tiny little hole in the homogenous, one-inch-wide view of what is and is not acceptable” (15). The townspeople, steeped in surfer Discourse, did not accept such a clearly inexpert surfer as a representation of their secondary Discourse. As Melekian would have us believe, the Cardiff Kook remains an affront to the surf culture and lifestyle of Cardiff-by-the-Sea.</p><p>What is perhaps most interesting for our purposes is the community’s embrace of the Cardiff Kook. Instead of rejecting the statue, the townspeople have made it a focal point for celebration. A Google image search reveals dozens of ways the Cardiff Kook is integrated into the town.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/388/1*4naY45vpkOGWBeByePP7JA.jpeg" /><figcaption>Source: <a href="http://365sandiego.com/">http://365sandiego.com/</a></figcaption></figure><p>Birthday announcements, welcome home notices, and even more elaborate decorations all point to an inversion of the town’s initial disdain for “Magic Carpet Ride.” From interloper to near insider, the very renaming of the work of art suggests an embrace of the sculpture, as the town connects its own name to the kook.</p><p>An annual “<a href="http://www.cardiffkookrun.com/">Cardiff Kook Run</a>” brings community members together on Super Bowl Sunday. It includes a costume contest homage to the emergent tradition of decorating the Cardiff Kook statue for special events. The <a href="http://www.thecardiffkook.org/">Cardiff Kook</a> has his own website, and one can even purchase the annual <a href="http://kookcalendar.com/">Kook Calendar</a> to mark each month with a stunning image of the Cardiff Kook’s homegrown attire.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/240/1*mA7v84u8dHHMZdWd7You2g.jpeg" /><figcaption>Cardiff Kook as a Moses-like figure.</figcaption></figure><p>In a profound juxtaposition of incongruities, the Cardiff Kook himself delivers “The 10 Commandments of Surfing” to the community (image at left). Each commandment speaks to a cultural practice within surfing. The outsider has emerged to deliver key principles for those who would be in the Discourse.</p><p>Just as Melekian and his buddy reveal instabilities within a Discourse in their discussion about the meaning of kook, the evolution of the Cardiff-by-the-Sea community’s understanding of the Cardiff Kook’s place illustrates the potential for a Discourse to adapt to changing circumstances. As early as 2008, just one year after “Magic Carpet Ride” appeared, Brad Melekian himself, reporting for <a href="http://www.utsandiego.com/sports/page2/20080825-9999-1s25surfcol.html">The Union Tribune</a>, observed a notable shift in the surfer community’s view of the sculpture. Discourses, it seems, can adapt quite quickly.</p><h3>Metaknowledge in the Discourse</h3><p>By acknowledging both the instability within and the malleability of a Discourse, it becomes possible for individuals from different backgrounds to participate in a Discourse. Gee’s “in it or not” perspective on a Discourse makes it difficult to explain the varied interpretations surfers might bring to a situation like the one described in “Kook.” Where Melekian sees a kook and his buddy sees a jerk, the surfer who confronts the young kid sees a surfer who needs to be put in his place. We suggest that our malleable notion of Discourse can both account for change in a Discourse and admit variation within a community.</p><p>We see membership in a Discourse as perhaps the intersection of multiple Discourses, not unlike a Venn diagram. One must participate in a certain portion of a Discourse to be considered a member, but there is also considerable room for variation within the community. This view better represents the individuality of humans as well as their ability to share in discourses. It is entirely consistent with Gee’s distinction between primary and secondary discourses, his idea that we participate in multiple Discourses, and our effort to explain the uncertain meaning of “kook” within Melekian’s community. It enables one to consider how what Gee calls metaknowledge can empower: “Metaknowledge is liberation and power, because it leads to the ability to manipulate, to analyze, to resist while advancing” (13). It also positions Melekian’s kook as an apprentice of sorts and not the outsider he might appear to be.</p><p>In Melekian’s kook, we have a person who is trying to adapt to his or her surroundings. Although he “could surf alright,” he was mindful of neither his limits nor the culture of the local community. <em>“</em>He’d waste whole waves spastically pumping down the line, all in service to these little credit airs” (Melekian 14<em>). </em>The kook was trying to signal membership in a secondary Discourse by riding hard, but he seems to lack the meta-knowledge that would enable him to make sense of and critique what he brought to the break. Or, put differently, his approach is all negative and reactive, perhaps because he does not have enough experience to make this adaptation.</p><p>Melekian’s essay does not offer enough detail on the situation to know what motivates the kook’s actions, but it may have something to do with a disconnect between one of his secondary Discourses and the surfer Discourse. As Gee argues, “When such conflict or tension exists, it can deter acquisition of one or the other or both of the conflicting Discourses, or, at least, affect the fluency of a mastered Discourse on certain occasions of use” (8<em>). </em>The surfer is not necessarily a failure, just misunderstood. He is an apprentice or, as argued earlier, a mushfaker not yet able to employ metaknowledge to participate in the appropriate Discourse.</p><p>Brad Melekian, in “Kook,” shows us what metaknowledge looks like within a Discourse. Melekian is able to write about and critique his own Discourse by stepping outside it, if only partially. And in perhaps the strongest meta-level moment in the essay, he asserts that “calling someone a kook… is probably one of the kookiest things a person can do”(15). Melekian is aware of the ambiguity of the term kook and how his own use of the term is rather ironic and in the process illustrates one of Gee’s central ideas: “Exposure to another language, having to translate it into and otherwise relate it to your own language, can cause you to become consciously aware of how your first language works (how it means). This ‘meta-knowledge’ can actually make you better able to manipulate your first language”(12).</p><p>The hang loose gesture, derived from the Hawaiian “shaka” sign for solidarity, compassion, and understanding, is a core term of surfer Discourse. The literate surfer, like a literate participant in any Discourse, does well to keep this idea in mind. One must be “in” the Discourse to be literate. But any Discourse also requires the application of metaknowledge if it is to adapt and adjust. Absent adaptation, a Discourse is at risk of ossification or death, much like any dead or dying language. Solidarity with those in the Discourse, compassion for those apprentices (and mushfakers) not yet in it, and understanding of the need for adaptation combine to keep a Discourse alive and well. Of course, when one is confronted by such blatant disregard of the Discourse’s elements as found in Melekian’s kook, it might be appropriate to simply shrug and acknowledge that the individual is illiterate.</p><p><em>*Sam B. Awklamb is the name we have given to the eleven-person Maine-based writing collaborative that crafted this work over a three-day period in late August. Sam B. Awkland is </em><strong><em>S</em></strong><em>tephanie Soucy, </em><strong><em>A</em></strong><em>mber Cusson, </em><strong><em>M</em></strong><em>egan Perry, </em><strong><em>B</em></strong><em>ritany Chamberlain, </em><strong><em>A</em></strong><em>lyssa Pobocik, </em><strong><em>W</em></strong><em>yatt Eshleman, </em><strong><em>K</em></strong><em>atie Perry, </em><strong><em>L</em></strong><em>iam Kramer-White, </em><strong><em>A</em></strong><em>lex Boucher, </em><strong><em>M</em></strong><em>ichael J. Cripps, and </em><strong><em>B</em></strong><em>riana Goud.</em></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=4d3b3040e925" width="1" height="1" alt=""><hr><p><a href="https://medium.com/language-lingustics/the-literate-surfer-4d3b3040e925">The Literate Surfer</a> was originally published in <a href="https://medium.com/language-lingustics">Language &amp; Lingustics</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
    </channel>
</rss>