<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0" xmlns:cc="http://cyber.law.harvard.edu/rss/creativeCommonsRssModule.html">
    <channel>
        <title><![CDATA[Make it your own d#mn self! - Medium]]></title>
        <description><![CDATA[My 20+ year adventure in digital fabrication - Medium]]></description>
        <link>https://medium.com/make-it-your-own-d-mn-self?source=rss----dd79dcc0f3df---4</link>
        <image>
            <url>https://cdn-images-1.medium.com/proxy/1*TGH72Nnw24QL3iV9IOm4VA.png</url>
            <title>Make it your own d#mn self! - Medium</title>
            <link>https://medium.com/make-it-your-own-d-mn-self?source=rss----dd79dcc0f3df---4</link>
        </image>
        <generator>Medium</generator>
        <lastBuildDate>Tue, 17 Nov 2026 03:31:54 GMT</lastBuildDate>
        <atom:link href="https://medium.com/feed/make-it-your-own-d-mn-self" rel="self" type="application/rss+xml"/>
        <webMaster><![CDATA[yourfriends@medium.com]]></webMaster>
        <atom:link href="http://medium.superfeedr.com/" rel="hub"/>
        <item>
            <title><![CDATA[Make it snappy…]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/make-it-snappy-4ebc19f9660c?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/4ebc19f9660c</guid>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Tue, 22 Nov 2022 16:26:49 GMT</pubDate>
            <atom:updated>2023-06-09T10:53:53.649Z</atom:updated>
            <content:encoded><![CDATA[<p>Some of the earliest designs I did for ShopBot in the late 1990’s…the work station and the coffee cabinet…used a snap joint that utilized the springy-ness of plywood to hold them together. They were cut as “hooks” that flexed sideways to let you assemble and dis-assemble the pieces without hardware.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/757/1*CkAj4U4EAgE_9V9giqJUrA.png" /><figcaption>Original Snaplok joint</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*08ynpjNYd7lB7K7uJpmmfg.jpeg" /></figure><p>That joint worked well if you just wanted to assemble and dis-assemble a couple of times, but after a while the hooks would break. I liked the “idea” of that connection though, so when an architect and ShopBot owner got in touch that was looking for a box for architectural models that his customers could open without any tools, I figured it was time to re-think things. V2 of the snaplok joint was the result.</p><p>The big difference is that the joint snaps “front to back” instead of “side to side”, so there is more continuous long grain to keep it from breaking. I was happy with this new connection type, but it was a bit fussy to machine the ramp on the end and it had an inherent weakness…the hooks would peal off after a couple of cycles. You can read about this evolution in <a href="https://medium.com/make-it-your-own-d-mn-self/i-once-thought-i-was-clever-ba3b3a4f250a">this Medium post</a></p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*uk2tx54r9Powqf6uQaWupQ.jpeg" /></figure><p>A couple of things have made this joint much more useable. The first is the introduction of the Fluting toolpath option in the VCarve design software that I use, which makes cutting the sloped ends much easier. They are just drawn as a series of lines with a start and end depth specified…they are the green lines in this drawing and can be modified to suit your needs:</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/566/1*3xUNTlc3oDPwCPH0o136Ug.png" /></figure><p>The other epiphany was that if I drill holes in the ”hook” when the parts were being cut, short pieces of dowels could be inserted to give cross-grain strength and reinforce the hook.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1005/1*04gTOADUurgVyWFzTLUu3w.jpeg" /></figure><p>All these mods required a little more time to cut and more post processing work afterwards, but I’m really happy with them and especially the satisfying “snap” when it goes together!</p><iframe src="https://cdn.embedly.com/widgets/media.html?src=https%3A%2F%2Fwww.youtube.com%2Fembed%2F20a4DrGUEl4%3Ffeature%3Doembed&amp;display_name=YouTube&amp;url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D20a4DrGUEl4&amp;image=https%3A%2F%2Fi.ytimg.com%2Fvi%2F20a4DrGUEl4%2Fhqdefault.jpg&amp;key=a19fcc184b9711e1b4764040d3dc5c07&amp;type=text%2Fhtml&amp;schema=youtube" width="854" height="480" frameborder="0" scrolling="no"><a href="https://medium.com/media/47688c70c75c17075a4f85ad80e607d3/href">https://medium.com/media/47688c70c75c17075a4f85ad80e607d3/href</a></iframe><p>I made a few things to test it out, but the big test was when ShopBot was heading to San Diego for the Vectric User Group this Fall and wanted a video arcade-ish display to show a slideshow. This joint made it easy to assemble on site and dis-assemble at the end of the event…I was pretty please by it.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/756/1*o5d8tRPGzXm1TeJG7CSWbg.jpeg" /></figure><p>As with all things, it has its drawbacks. The slots that take up space in your panels, the fingers stick out beyond the face of the panels, and it’s certainly not airtight! But if you can live with these issues and want to give it a try, here’s a sample joint in VCarve v11.5 to play with. My only suggestion is to start by cutting this version and then modify based on how this works out.</p><p><a href="https://bit.ly/Snaplok_v2">https://bit.ly/Snaplok_v2</a></p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=4ebc19f9660c" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/make-it-snappy-4ebc19f9660c">Make it snappy…</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[The downside of offering too much choice]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/the-downside-of-offering-too-much-choice-9a55d6d159e?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/9a55d6d159e</guid>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[mass-customization]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[indecision]]></category>
            <category><![CDATA[too-much-choice]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Thu, 06 Feb 2020 15:03:54 GMT</pubDate>
            <atom:updated>2020-02-09T14:14:22.514Z</atom:updated>
            <content:encoded><![CDATA[<h3>How much is too much choice!</h3><p>If you’ve been following along you know that I’ve been interested in digital fabrication’s ability to make customized items, particularly furniture. Something that’s created specifically for the customer. But just being interested in something doesn’t always lead you toward any great insights…there needs to be some “design doing” along with “design thinking”.</p><p>I had been doing this stuff long enough so knew I could figure out a method to fabricate custom items to fit a person’s needs, but would anyone care? Were the unwashed masses waiting for someone to make a chair that was just for them? The only way to find out is to give it a shot and do a test.</p><p>Shelving was my first thought…it’s ideal for customization. You know the stuff you need to put on shelves, and you know the space you have to fill. All you need is a tape measure, or maybe just a yardstick. A better test though were chairs. Making a chair that was “just right” for you.</p><p>The two things I needed to test if there was an interest were a way for people to quantify what their perfect chair would be, and a simple design that could be easily modified to fit their specs.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*L0c5OUvs9HzYxbwSpT5uTA.jpeg" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*Yma87bReSH8h7ih7iL9-wQ.jpeg" /></figure><p>The first step was to make an adjustable chair that people could sit in and find their “perfect” seat height. It looked like some kind of torture device but adjusted from 15&quot; seat height through 21&quot; height in 1/8&quot; increments.</p><p>The design for the chair was equally simple. Something slab-y that would be easy to modify by moving the slots for the seat up or down.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/875/1*OSwkh-nZ05l25cXfXLi2og.jpeg" /></figure><p>I started testing on everyone that came in the shop. It would start somewhere in the middle of the range, let someone sit in it, and then ask if it was too high or too low. Then I would adjust it up or down until they said it was “just right”. That was the theory at least, but it didn’t turn out that way.</p><p>The majority said it was “just fine” wherever it happened to be when they started. I asked if they would like it higher or lower, and they said it felt good just where it was.</p><p>There were some folks that really got into the idea of having a chair that was customized just for them, and would keep trying different heights until they found what they said was perfect for them. The funny part though was that I could move the seat when they weren’t around, and ask them to confirm that it was the perfect height. And nobody could tell that it was different. It was still “just right”</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*FWf0TNiVZGAb4bGz7T9h7g.jpeg" /></figure><p>I was kind of disappointed by how little interest there was in having what was basically a prescription chair, but did enjoy playing with different chair designs and options. My favorite by far was one I named the “Heart Attack Chair”</p><p>You know that feeling when you’re sitting in a chair and start to lean back. It really feels good until you reach the point when all of a sudden it feels like it’s about to tip over backwards! The Heart Attack Chair is pretty much binary and goes straight from sitting normally to feeling like it’s going to tip over! Even when you KNOW it’s not going to flip you over backwards, it still give you the brief feeling of panic!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*59uqZASvbfDSTH-ByNZVAA.png" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*U0ySSmi7cF-SdqW2pnVwbw.png" /></figure><p>I don’t claim in any way that this was a scientific study, and it may just be that I just have weird people come into my shop, but it definitely dampened my interest in customized chairs. My instinct is that people were so used to buying chairs based on style instead of size that they weren’t able to wrap their heads around being able to make such granular size choices. Maybe if I had offered just a limited number of sizes to try instead of such small variations like <a href="https://medium.com/@wlyoung/james-mcbennett-and-the-4-bears-9f037e9e01f7">James McBennett’s stools</a> , the outcome would have been different?</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=9a55d6d159e" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/the-downside-of-offering-too-much-choice-9a55d6d159e">The downside of offering too much choice</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Stools for Maker Faire]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/stools-for-maker-faire-a07025795bce?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/a07025795bce</guid>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[furniture]]></category>
            <category><![CDATA[makers]]></category>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[small-scale-manufacturing]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Sun, 17 Nov 2019 15:32:18 GMT</pubDate>
            <atom:updated>2019-11-17T15:31:01.662Z</atom:updated>
            <content:encoded><![CDATA[<p>A month or so before one of the early Maker Faires…maybe the first Austin Faire in 2008?..I got an email from the MAKE folks asking if I would be interested in making a bunch of simple stools that they could scatter around outside. They needed to be able to stand up to rainy weather, knock down flat and be easy to assemble, and not be too expensive…they may end up wandering off during the event!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*lEcKZcnK1MX1n5NF2gy6Yw.jpeg" /></figure><p>I thought for a bit and proposed these simple 3-piece stools. I’d just started working with Advantech and like that it held up so well to moisture. It was certainly heavy and can be a bit splintery so needs a little sanding and rounding over edges, but it still seemed like the best material for the job.</p><p>For maximum stability a stool should have 3 contact points with the ground, but I wanted to keep things simple and two slotted legs fit the bill, held securely together with 2 screws. After some fiddling and fussing I found a size that let me cut 5 stools from a $30 sheet of Advantech and was ready to start cutting.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*WG4OiwxxURsUkwCxNHOm8A.jpeg" /><figcaption>Sheet layput</figcaption></figure><p>Each sheet had v-carved text and countersinks for the assembly screw holes so a 90 degree v-bit was needed, and profile cutting was done with a 3/8&quot; endmill.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*KTgE47fdiNY8obm90v7I0g.jpeg" /><figcaption>5 MAKE stools on a sheet</figcaption></figure><p>I generally try to avoid bit changes and could have pocketed the MAKE logo instead of v-carving it I guess, but the hard corners in the logo look great when v-carved…I was worth the small hassle of a bit change!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*_DLuRqCDNdaHSwJ2YEHlqQ.jpeg" /><figcaption>The MAKE logo is ideal for v-carving!</figcaption></figure><p>Vacuum holddown kept everything in place while it was being cut, with the exception of the waste material in the hand hole which kept popping loose and jamming the bit. They ended up getting a single tab to hold them in place, which was removed when the seats were rounded over with a hand router and 3/16&quot; radius roundover bit.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*sVyEWg9XI2vsHvhaDgaClQ.jpeg" /><figcaption>Dry assembling to test for fit, then stacking for shipping</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*x3vM_syZ8PcGDCbyG2HNOA.jpeg" /><figcaption>I was pretty happy with how little waste there was</figcaption></figure><p>I can’t remember how many I ended up making, but think it was in the 40–50 stool range. They were pretty successful as stools, shown by how many of them disappeared during the Faire, but over the years I’ve made lots of other stool designs both of my own design and from other “real” designers and will post about them soon.</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=a07025795bce" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/stools-for-maker-faire-a07025795bce">Stools for Maker Faire</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Pete’s legs]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/petes-legs-f8700a17e82b?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/f8700a17e82b</guid>
            <category><![CDATA[furniture]]></category>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[digital-fabrication]]></category>
            <category><![CDATA[fancy-legs]]></category>
            <category><![CDATA[cnc]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Fri, 08 Nov 2019 14:00:01 GMT</pubDate>
            <atom:updated>2019-10-29T16:09:49.527Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*K_7B7rAYHPyWE3lCITmtvA.jpeg" /></figure><p>My buddy Pete stopped by the shop the other day and asked if I would make some table legs to match an existing table. Turns out that they had gotten two end tables recently, but only one table’s worth of legs. I didn’t ask the details!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*mB7t42AAY4qZzD-jkDGCIA.jpeg" /></figure><p>He had one of the original legs to go by but didn’t care if they were EXACTLY the same…just wanted to have something close. The blanks needed to be 2&quot;x2&quot; and 24&quot; long and would be painted, so I grabbed a length of 5/4 poplar and glued up 4 blanks. A quick pass through the thickness sander and a trim to length and they were ready to machine.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/466/1*EwInZK1O4Gp3sMvcuqTIfw.png" /></figure><p>I’ve been pretty indexer-centric recently, but the design was pretty easy to cut as profile cuts with a long 1/4&quot; endmill. One set of toolpaths would cut two sides, then the bank could be rotated 90 degrees, re-clamped to the fence, and the other sides cut.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*vkYxBy7pn4oT_5ui9RLd5g.jpeg" /><figcaption>Machining the first 2 sides</figcaption></figure><p>All I needed was a fence to securely and accurately hold the blanks. Since my bit was so long, I cut in a lot of passes.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*a48NHClNRoLo_MJH3E1enw.jpeg" /><figcaption>Flipped to cut second pair of faces</figcaption></figure><p>There was one detail that took a while to figure out. There was a 45 degree shoulder at the top and middle where the legs bolted to the shelves, and that curved at the ends. I thought about making a jig and cutting it on a bandsaw, but realized that a Fluting Toolpath in my VCarve software did exactly that kind of cut. A large 90 deg VBit that cut along the edge made quick work of it.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/696/1*_mWXjDrxOMms_eS6_B-Aig.png" /><figcaption>The fluting toolpath</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*LzMRserJp-fEZOcgijXhPA.jpeg" /><figcaption>Shoulder cut using that fluting toolpath</figcaption></figure><p>The final job was to drill for the threaded inserts for the bolts that would fasten the legs. I tried in vain to think of a clever digital way to machine them, but a drill press and a holding jig with a v-grooved slot proved to be by far the best way to do it.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*nkxEWUsS-uqGFAQ3NcFP4g.jpeg" /><figcaption>Dry assembled</figcaption></figure><p>The legs turned out nice, with minimal sanding required. Here’s the table, dry assembled to check for fit before giving the legs to Pete to paint semi-gloss white and final assembly</p><p>I’ve put together a quick video on YouTube showing the whole process. It really went quickly, just requiring a flip every once in a while. The hardest part was making sure the clamps were out of the way of the toolpath!</p><iframe src="https://cdn.embedly.com/widgets/media.html?src=https%3A%2F%2Fwww.youtube.com%2Fembed%2F9SqYj4RWies%3Ffeature%3Doembed&amp;url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D9SqYj4RWies&amp;image=https%3A%2F%2Fi.ytimg.com%2Fvi%2F9SqYj4RWies%2Fhqdefault.jpg&amp;key=a19fcc184b9711e1b4764040d3dc5c07&amp;type=text%2Fhtml&amp;schema=youtube" width="640" height="480" frameborder="0" scrolling="no"><a href="https://medium.com/media/2bf1c87ce2c6102ae75445ec28574caa/href">https://medium.com/media/2bf1c87ce2c6102ae75445ec28574caa/href</a></iframe><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=f8700a17e82b" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/petes-legs-f8700a17e82b">Pete’s legs</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Tiny boats]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/tiny-boats-e4eaabe6c3a9?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/e4eaabe6c3a9</guid>
            <category><![CDATA[tiny-boat]]></category>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[cradle]]></category>
            <category><![CDATA[boat-building]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Wed, 16 Oct 2019 15:45:12 GMT</pubDate>
            <atom:updated>2019-10-16T15:44:36.197Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/842/1*xXTWnZEjU7b7wAIo3W53hQ.png" /><figcaption>A cradle for a friend</figcaption></figure><p>Boats are in my heart, and along with using my ShopBot to cut bits and pieces for full sized boats I occasionally made little boats as tables and cradles for friend’s kids. These tiny boats used a mix of digital and analog skills, which pretty much describes how I work to this day.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/815/1*PJq6K2cyVFNDgCClPvEm7w.png" /><figcaption>A coffee table with a safety glass top</figcaption></figure><p>Almost all boats no matter the size are made from panels that meet at odd angles, and these tiny boats were no different. The transom at the back of the boat had angled faces that were consistent and could be cut on a table saw with a tilted blade, but the 3/4&quot; bottom panel had faces that were curved and changed along it’s length (called “winding bevels” in boatbuilder’s lingo). I cut these on a band saw and then “finessed” them with a plane or sander to get the changing angle just right.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/497/1*gTBrbG2MHRSkdO4r5fhWfw.png" /><figcaption>Clamps, clamps, and more clamps!</figcaption></figure><p>The side panels however could be cut on my ShopBot and included the overlaps along their edges for both looks and extra strength, similar to the QuickLap canoe. Since many of these little boats were used as cradles for babies though I didn’t want to use any epoxy glue to hold the laps together, or fasteners through the laps that might have sharp edges. My solution was to use the ShopBot to cut dozens of springy clips out of scrap plywood to act as clamps while the wood glue dried. And as with so many things in life, more clamps is almost always better!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/838/1*BGkn3I8bmCWNx0aPixOVwA.png" /><figcaption>Three tiny boats</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/571/1*eraUCdRK5DEhNVTp6oZd0g.png" /><figcaption>A cradle that became s toy box</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/950/1*tQYdhvAnYbxchJCZDMbZJg.jpeg" /><figcaption>Removing the rockers turned the cradle into a table</figcaption></figure><p>One of my favorites was one I did in collaboration with a local artist, Miriam Riggs, to give the appearance of having a glass bottom. It was done for a local charity auction and really turned out great!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/583/1*e-jeH36uVZLOrborCSS_7w.png" /><figcaption>Glass bottomed tiny boat</figcaption></figure><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=e4eaabe6c3a9" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/tiny-boats-e4eaabe6c3a9">Tiny boats</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[It’s puzzling]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/its-puzzling-a2f174a6c185?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/a2f174a6c185</guid>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Sun, 13 Oct 2019 12:42:03 GMT</pubDate>
            <atom:updated>2019-10-13T12:37:49.598Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/640/1*vBPfXRTGgIOLTwmp5o_OAQ.jpeg" /></figure><p>Once the word got around that I was willing to work on projects for teachers, I started to get a lot of requests. I had to turn down most of them for lack of time, but occasionally I would get one that seemed interesting. A request for a fun way to help kids learn their letters and how to spell was one of the ones that I took on.</p><p>I’ve always been interested in puzzles, so figured that a set of plywood cutouts that interlocked like puzzle pieces, with letters and numbers engraved into them, might be a good option. 1/2&quot; Baltic Birch plywood was the material I chose, cut into 20&quot; x 30&quot; blanks to efficiently use the 60&quot;x60&quot; sheets it comes in. And I learned pretty quickly that I had to add a little bit of “slop” into the fit, so that kids could easily stick them together and take them apart without needing a hammer!</p><p>Rather that having to paint each letter after it was v-carved, a fussy job for sure, it was much easier to paint the blanks in bright primary colors before cutting and leave the cutout letters unpainted.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/640/1*nLx3MeB4Do6zKKJbgUlaiw.jpeg" /></figure><p>Having all my blanks the same size let me save a bunch of bit changes by doing all the v-carving in the whole stack of blanks, and then changing to an end mill to cut out the pieces. The number of pieces in each set was determined by the frequency of letters in a Scrabble game, plus a handful of numbers and punctuation characters.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*lP1weHsZV_hElmUB_gSD-w.jpeg" /></figure><p>These letters turned out to be really popular and I ended up making a set of each pre-K, kindergarten, and 1st grade class at the school. The last I heard they are still being used, though imagine they are getting pretty ratty looking by now!</p><p>Besides their use as a learning toy, I’ve used this same sort of puzzle connection for all kinds of things over the years. Everything from signs to a floor for a friend. Even modified these “Letter Linkers” to have connections on all edges to make them more Scrabble-like</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/300/1*evyXgTxmFpAS_V_2sHg2JQ.gif" /></figure><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=a2f174a6c185" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/its-puzzling-a2f174a6c185">It’s puzzling</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Don’t be afraid to dig in]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/dont-be-afraid-to-dig-in-8953da546809?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/8953da546809</guid>
            <category><![CDATA[dont-be-afraid]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[text-file]]></category>
            <category><![CDATA[stool]]></category>
            <category><![CDATA[shopbot]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Sat, 05 Oct 2019 14:40:34 GMT</pubDate>
            <atom:updated>2019-10-13T12:43:03.568Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/480/1*bdg5XxfPnfhL_gkdOnQDYA.jpeg" /></figure><p>We all suffer a bit from kleptonesia <strong><em>(n.) condition characterized by forgetting the source of a stolen idea. </em></strong>We think an idea we have is unique and original, but it turns out that we got it from somewhere or someone else but just don’t remember. I’m as bad as anyone about that, but occasionally I remember exactly where and when I got the idea for a project.</p><p>If you grew up in the 60’s and 70’s and had an interest in building things, you probably had a copy of the book <a href="https://www.amazon.com/Nomadic-Furniture-Victor-Papanek/dp/039470228X/">Nomadic Furniture</a>. It was cool and inspiring, and one of my favorite designs in it was a stool that used an angled connection to hold it all together.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*X2M6rJnvG5wH1J1XFDtshQ.png" /></figure><p>I was curious if a version of that stool could be made with a ShopBot, including the angled ramps in the seat. I still didn’t have access to any 3d software to create the sloped cut, but my experience with hand coding the ramped gains in the ends of the Quicklap canoe planking in Notepad showed me that created those kinds of cuts was tedious but do-able. The rest of the design used standard notches and tabs, and the snaploc joinery from the workstations etc.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/523/1*cQYSalGxjL7Jv43UjUn7DA.jpeg" /></figure><p>There are lots easier ways to created ramped cuts like that these days, and there probably were back then too, but this is the extremely manual method that I used.</p><p>First the seat was drawn and the vertical part that locked into it with the angled tabs. Projecting these tabs onto the seat defined the notches in the seat, and the extent of the angled faces</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/582/1*pBW-WUNo1zAyX0XfmXRSug.png" /><figcaption>The seat and the support that notches into it</figcaption></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/660/1*_y-siT4P5VdhzOe5Xt7V6A.png" /><figcaption>The ramped edge divided up into a series of short vectors</figcaption></figure><p>Since the ramps would be cut with the edge of the bit, the vectors were shifted over by the radius of the bit. A Outside toolpath was created of the seat cutout, along with On The Line toolpaths for the vectors for the ramps..the red vectors in the images above and below. Pretty straightforward so far.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/665/1*9WUlvFx9wcatNVuTnjqk4Q.png" /><figcaption>Vectors shifted by the radius of the bit</figcaption></figure><p>Since a ShopBot file is just a text file, it can be edited like any other text file in Notepad or your favorite text editor. The toolpath for each vector line plunges to full depth and then cuts along it’s length. You just need to modify the start point of each vector to be at the surface… 0.00 …instead of -0.75. It’s a bit fussy but not awful….the values below that are <strong><em>Bold and Italic</em></strong> show the points that were changed</p><pre>&#39; The Original on-line toolpath generated from ramp vectors<br>&#39; As created, each vector will be a full depth cut from <br>&#39; one end to the other.</pre><pre>J3,-6.25,-7.806,0.20<br>M3,-6.25,-7.806,<strong><em>-0.75</em></strong><br>M3,-5.75,-7.806,-0.75<br>J3,-5.75,-7.806,0.20<br>J3,-6.25,-7.572,0.20<br>M3,-6.25,-7.572,<strong><em>-0.75</em></strong><br>M3,-5.75,-7.572,-0.75<br>J3,-5.75,-7.572,0.20<br>J3,-6.25,-7.338,0.20<br>M3,-6.25,-7.338,<strong><em>-0.75</em></strong><br>M3,-5.75,-7.338,-0.75<br>.<br>.<br>.<br>J3,-5.75,-5.233,0.20<br>J3,-6.25,-5.000,0.20<br>M3,-6.25,-5.000,<strong><em>-0.75</em></strong><br>M3,-5.75,-5.000,-0.75<br>J3,-5.75,-5.000,0.20</pre><pre>&#39; Here are the 3d ramps modified from 2d vector file. <br>&#39; The Z-value of the first point in each pair is changed to 0,<br>&#39; the surface of the material. This makes the cut a 3d move that <br>&#39; starts at the surface and plunges to full depth along it&#39;s length</pre><pre>J3,-6.25,-7.806,0.20<br>M3,-6.25,-7.806,<strong><em>0.00</em></strong><br>M3,-5.75,-7.806,-0.75<br>J3,-5.75,-7.806,0.20<br>J3,-6.25,-7.572,0.20<br>M3,-6.25,-7.572,<strong><em>0.00</em></strong><br>M3,-5.75,-7.572,-0.75<br>J3,-5.75,-7.572,0.20<br>J3,-6.25,-7.338,0.20<br>M3,-6.25,-7.338,<strong><em>0.00</em></strong><br>M3,-5.75,-7.338,-0.75<br>.<br>.<br>.<br>J3,-5.75,-5.233,0.20<br>J3,-6.25,-5.000,0.20<br>M3,-6.25,-5.000,<strong><em>0.00</em></strong><br>M3,-5.75,-5.000,-0.75<br>J3,-5.75,-5.000,0.20</pre><figure><img alt="" src="https://cdn-images-1.medium.com/max/640/1*hg2aJPXAi2-y8nUoLmN4hw.jpeg" /></figure><p>This sort of manual toolpath modification is a bit of a pain compared to other methods, but has one advantage. It makes you jump in and learn how toolpaths work and get comfortable with digging in and making changes. So when other weird things come up that you can’t figure out how to do in your CAD/CAM software, you have another tool in your toolkit!</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=8953da546809" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/dont-be-afraid-to-dig-in-8953da546809">Don’t be afraid to dig in</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[Just because you can, that doesn’t always mean you should…]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/just-because-you-can-that-doesnt-always-mean-you-should-e7da1df943d8?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/e7da1df943d8</guid>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[bad-ideas]]></category>
            <category><![CDATA[adirondack-chair]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[plywood]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Thu, 03 Oct 2019 12:13:32 GMT</pubDate>
            <atom:updated>2019-10-03T12:14:54.848Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*PFpYIpaIdUqKUKhylEQNkA.png" /></figure><p>So now I had a machine that could, to paraphrase Neil Gershenfeld, “make almost anything&quot;. I designed and built some pretty neat projects that made sensible use of this powerful technology, but I would also occasionally fall into the <a href="https://en.wikipedia.org/wiki/Law_of_the_instrument">Law of the Instrument</a> trap. This caught me when someone at ShopBot asked if I could design a plywood Adirondack chair.</p><p>It didn’t matter that they could have bought a perfectly serviceable Adirondack chairs made from solid lumber for not much more than $100 back then…I had a make-anything machine and I was determined to make everything.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/981/1*ocuexRNkLd4_RPS9KLWY9w.gif" /></figure><p>In my defense I think I designed a better looking chair that they could have bought for cheap, especially the shape and tilt of the back. In my excitement to be “clever” though I broke two very important rules:</p><ul><li>Plywood is an amazing material with lots of sensible uses, but outdoor furniture is not one of them. Even REALLY expensive marine plywood still needs to have every exposed edge thoroughly sealed, to keep out every bit of water. After years of building boats I certainly knew that, and the chair I designed had WAY more exposed raw edges than any boat. Even with meticulous painting and sealing, water will always find a way to get in. Especially because of rule #2</li><li>Don’t ever, ever, ever, ever, ever fasten two pieces together by driving a screw into the edge of a piece of plywood. Ever. The joint will be weak, the plywood will split, and water will get it. Just don’t do it. Ever.</li></ul><p>You may wonder why I don’t have any pictures of these chairs. A dozen or so were built and they were actually pretty darn comfortable, but they were doomed from the day they first went outside. I should have known better, but the desire to be “clever” is awfully strong!</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=e7da1df943d8" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/just-because-you-can-that-doesnt-always-mean-you-should-e7da1df943d8">Just because you can, that doesn’t always mean you should…</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[The Wheel of Kilmon!]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/the-wheel-of-kilmon-316fc42eaac3?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/316fc42eaac3</guid>
            <category><![CDATA[kindergarten]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[good-karma]]></category>
            <category><![CDATA[shopbot]]></category>
            <category><![CDATA[wheel-of-fortune-wheel]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Tue, 01 Oct 2019 18:16:19 GMT</pubDate>
            <atom:updated>2019-10-01T18:15:55.107Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/800/1*X9lKzsPF9fmLWHBgvvMoOg.jpeg" /><figcaption>The Wheel of Kilmon</figcaption></figure><p>About the same time as I was working on the rubber band racers, I was asked by another teacher at the school if I could make a “Wheel of Fortune” wheel for her Kindergarten class. It’s always fun building the first one of just about anything, and this thing had enough moving parts that I couldn’t resist.</p><p>Conceptually it seemed pretty simple… a lazy susan mechanism to make it spin, a clicker to make it cool, and some way to make it easy to change the pie-shaped segments. I had a couple of lazy susan mechanisms, piles of plywood, and a ShopBot so I was good to go.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/800/1*8Y6FxUhYlfohKRs3H_TOig.jpeg" /></figure><p>My biggest concern was limiting the number of pinch points for small fingers. I decided to make the openings very large on the top, and place the clicking mechanism underneath to make it easier to protect. This worked really. A strip cut from a plastic credit card made the perfect clicker…flexible enough to let it spin easily but firm enough to be sufficiently “clicky”</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/480/1*vrGZ9NaWWLRQr0OdZq1-fw.jpeg" /></figure><p>My original idea was to make it stand vertically, so I extended the legs and made 2 feet for it to stand on. Unsurprisingly, lazy susan mechanisms work really well when they are horizontal, but not nearly was well when used on edge. I scraped the vertical idea, discarded the feet and stuck with it being used flat on a table or floor.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1015/1*P_0G-5mLbsA4uERFNuG_lg.png" /></figure><p>The other thing I thought was important was to make it easy to modify the “Pie Slices” to fit with different lessons. Color recognition was something she really wanted it for, but I figured that having some that were painted with blackboard paint would let her draw letters or shapes to increase the number of ways it could be used. Holding the slices in place with Velcro dots made switching them out really easy, letting me give her a couple of extra sets of pie slices.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/800/1*Ce2zDL3NOC8bTEvAQXzTBQ.jpeg" /></figure><p>Oh yeah…about the name. The teacher’s name was Mrs. Kilmon..what else would you call it?</p><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=316fc42eaac3" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/the-wheel-of-kilmon-316fc42eaac3">The Wheel of Kilmon!</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
        <item>
            <title><![CDATA[R is for Racer]]></title>
            <link>https://medium.com/make-it-your-own-d-mn-self/r-is-for-racer-7275b02a0c64?source=rss----dd79dcc0f3df---4</link>
            <guid isPermaLink="false">https://medium.com/p/7275b02a0c64</guid>
            <category><![CDATA[rubber-band-racers]]></category>
            <category><![CDATA[cnc]]></category>
            <category><![CDATA[make-it-your-own-self]]></category>
            <category><![CDATA[kids-building]]></category>
            <category><![CDATA[shopbot]]></category>
            <dc:creator><![CDATA[Bill Young]]></dc:creator>
            <pubDate>Tue, 24 Sep 2019 17:33:13 GMT</pubDate>
            <atom:updated>2019-09-24T17:32:42.336Z</atom:updated>
            <content:encoded><![CDATA[<figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*1CmMHu-_EwHcLg3_V5HsqQ.jpeg" /></figure><p>If you were a hands-on kind of person, the early 2000’s were a frustrating time for education. The shop classes that I remember when I was in school had been all but eliminated. Dale Dougherty and the Maker Movement hadn’t yet legitimized <a href="https://makered.org/">“making” in the classroom</a>. And the SOL…Standards of Learning…tests made it tough for a teacher to do anything outside the prescribed curriculum. I decided in my own small way to fight this trend to eliminate anything that wasn’t considered traditionally academic.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*i_z8FVDl8VHZq3XOr39oeA.jpeg" /></figure><p>This rubber band racer project was created to help my wife’s elementary school class on a couple of fronts. “Officially” it was an exploration of shapes, mechanisms, and motion to fulfill those Virginia State Standards of Learning. Each pre-kindergarten class learn a new letter every week at school, and “R” week was coming up. But underlying it all was my guerilla attempt to get kids making something with their hands! Of course geometry and spelling and history are critical things to learn, but I felt ( and still feel) strongly that kids also needed to be able to sand and paint and hammer, until they had something <strong><em>they</em></strong> had made and that they could be proud of.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*ugs83fRmd5fm7neVhi0uIg.png" /></figure><p>Since I was funding this out of my pocket I needed something simple and cheap. After trying a couple of prototypes I ended up with a simple rubber band powered race car that was easy to cut, didn’t cost a lot, and could be assembled by pre-kindergarten age kids.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*86uyv1k0knQ5u9gkGugn-w.jpeg" /></figure><p>I had to make 37 racer kits, enough for both pre-k classes, so I made a shopvac-powered vacuum jig to make it easy to cut the parts out of a stack of equal-sized blanks. And since dowels are no more accurately sized than plywood, I had to take calipers to the hardware store to buy enough some-sized dowels to make all the kits and then resize the holes in the toolpath file to fit that specific size dowel.</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/800/1*IKh9XGq4PNrON0ePxSzOug.jpeg" /></figure><p>Of course the best part was watching the kids build, and then race, their racers. The first morning was spent sanding (with the bonus of having “R”ough sandpaper for R week!) and painting. After the paint had dried over night they spent the next morning putting their racers together and then racing them.</p><p>For a while at least they got to do what kids naturally want to do…build something with their own hands!</p><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*AJqGYWmNAOhBxBFsw7zQmA.png" /></figure><figure><img alt="" src="https://cdn-images-1.medium.com/max/1024/1*1TsfHze9Hin61bvPSIjT-w.jpeg" /></figure><img src="https://medium.com/_/stat?event=post.clientViewed&referrerSource=full_rss&postId=7275b02a0c64" width="1" height="1" alt=""><hr><p><a href="https://medium.com/make-it-your-own-d-mn-self/r-is-for-racer-7275b02a0c64">R is for Racer</a> was originally published in <a href="https://medium.com/make-it-your-own-d-mn-self">Make it your own d#mn self!</a> on Medium, where people are continuing the conversation by highlighting and responding to this story.</p>]]></content:encoded>
        </item>
    </channel>
</rss>