Sitemap

Lighting engine

23 min readNov 16, 2021

Project #4

November 11, 2021

Today marks the start of our last project for the fall semester. It consists of creating objects that modulate and produce light for personal use; in the end, I should make a final piece that serves a specific purpose.

For the next class, I have to think about specific aspects regarding this project, experiment with light, and create sketch models. The things I have to think about first are:

  • Think about ways I use light in our studio and think about the purpose of the lighting engine that I'm creating.
  • Look at what the paper can do before coming up with a specific idea.
  • Buy a lightbulb.
  • Design something that functions well in the on/off state.
  • Use pattern as a by-product of the structure.
  • It's ok to copy other designs to understand their creator's process and to study it.

November 13, 2021

Today I woke up early to go to Home Depot to buy lightbulbs. When I got there, it was interesting that I was able to test out each different type of light to know what I was going to buy. I decided to buy "Daylight," a cold tone and bright light, and "Soft White," a warm light. I still wasn't sure what the purpose of my lamp was going to be, so I decided to buy both of them to try out different things and see which one I liked best.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

After coming to campus, I went to the art store and bought different types of white paper: Stonehenge white, blotter paper, cardstock, and Mi-Teintes. After that, I created a Pinterest board and compiled many different ideas about paper lamps and lampshades.

Then, I tested the different papers with the lights. I still didn't know exactly how to approach my project, so I figured that the best way to generate ideas was to start. Hence, I grabbed all my papers, created a cylindrical shape with each of them, and put the light inside to examine the quality of the paper and the quality of the light.

Stonehenge white

  • Slightly textured
  • Slightly thick (still easily bendable)
  • Moderate light
Press enter or click to view image in full size

Blotter paper

  • Slightly textured
  • Very thick
  • Soft light
Press enter or click to view image in full size

Cardstock

  • Slightly textured
  • Thick
  • Soft light
Press enter or click to view image in full size

Mi-teintes

  • Textured
  • Thin
  • Bright light
Press enter or click to view image in full size
Press enter or click to view image in full size

Printer paper

  • Although it was very smooth, the structure was visible because of how thin it was.
  • Very Thin
  • Bright light
Press enter or click to view image in full size
Press enter or click to view image in full size

Transfer paper

  • Smooth
  • Extremely thin
  • Very bright light
Press enter or click to view image in full size

November 14, 2021

My plan for today was to think more specifically about what the purpose of my lighting engine was going to be. When I tested the warm and cold light, I was more drawn to the first one. Warm light made me feel more at peace and relaxed, which I appreciate, especially now that the semester is ending and finals are coming up.

Being stressed and nervous about my final projects and exams led me to think about the importance of taking breaks, meditating, and connecting with friends. For this reason, I want to create a lamp that helps me relax and take some time off for myself. While its purpose will be more relevant to the state, I still want to create something that conveys satisfaction and peace while off, which is why aesthetics play an essential role in my piece.

The next step is to break its purpose and what I want to achieve into bullet points so that it is easier for me to get my thoughts organized and come back to them in the future if I'm ever feeling a bit lost or confused.

  • The lamp will not project a bright one-directional light. Instead, it will diffuse warm-toned light that illuminates a bigger surface softly.
  • The lamp will be helpful for when I want to take naps, meditate, listen to music, talk with friends, or when I simply want to take my eyes off from my work a bit and appreciate the form of the light.
  • The light will have a pleasing form, either by following a repeated geometrical pattern or by having a more organic shape that resembles an aspect of the natural world.
  • The light will serve a purpose when it is on (by creating ambiance) and when it is off (by being pleasing to the eye).

Then I added more ideas to my interest board, picked a few to try out, and made a to-buy list to start doing my experiments. What I bought was:

  • Rubber bands
  • Thread
  • Hole puncher
  • Flower wire
Press enter or click to view image in full size

November 15, 2021

The plan for today was to make as many sketch models as I could and learn from my experiments.

  • For the first one that I did, I copied an already existing pattern. I used cardstock (the larger sheets) and cut it in half to make a long strip. After that, I copied the pattern, and with the help of the non-sharp part of an exact knife, I scored the paper. Then with a hole puncher, I punched holes on one of the edges and passed a rubber band inside it. I chose a rubber band and not a string because I didn't want to keep undoing the knot every time I inserted the lightbulb inside of the piece. So with a rubber band, I figured it was easier to stretch it out. Once I put the lightbulb in and turned it on, I could see where I glued the edges because I overlapped some parts. Maybe it is better to use tape and not overlap any flaps if them coming through is not intended. The quality of the light was soft and diffused, which I liked a lot and followed what I had in mind with my project.
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
  • For the second one, I was inspired by a lampshade that resembled a flower. I was interested to see how the layer looked when it was on. To create the petals, I used tracing paper. For the construction of the petals, I grabbed two pieces of petal-shaped tracing paper, put two strips of glue on the middle, and glued them together. Then, I inserted flower wire through the thing gap that was left in the middle. After a few tries, I found out that it was tough to do without piercing the paper, so I changed my strategy and glued the papers while keeping the wire inside. This was tricky because the wire was not perfectly straight, but it worked better than the previous one. At first, I had two petal shapes connected, but then I figured out it was pointless because when I folded them, it was hard to create a form that could go around a lightbulb, so I started making the petals individually. After that, I glued them to create a flower-like shape and made a small circle out of wire to put in the middle for the lightbulb fixture to pass through. When I tested the light, I liked the overall concept; however, the execution could use a lot of improvement. The quality of the light was not the best, mainly because the shade was too small, so a lot of light shined through it, not to mention the fragile paper.
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
  • The next one I did was relatively simple. This time, I didn't get inspiration from any elements of my interest board but tried to simplify the first shade that I made. To do this, I grabbed a sheet of 11 by 17 printer paper and folded it in accordion style. Then, with the help of tweezers (the only thing I had in hand), I made tiny little holes along one of the edges to pass a thread through it. This time I was going to make the thread adjustable, unlike the first one where I used a rubber band. When I put the lightbulb inside of it, the quality of the light was acceptable. It was moderately diffused and subtle, mainly because the accordion flaps created a barrier for the light. One problem I had with it was that I made it too short, so it didn't close up in the part of the lightbulb where I wanted it to, but I guess that is easily fixable by just using a wider piece of paper.
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
  • The last experiment I did was the one that turned the worst; nonetheless, I learned a lot from it. I took inspiration from the threaded Uno fitter (figure 1) to make the wire structure. I used tracing paper again and cut out a circle from it. Then I cut out slits in the middle so I could later fold them inside the wire structure. The main issue with this one was that it was way too small, and the wire shape was inconsistent and "wonky." The diffusion of the light was not great, and the glue showed up prominently; however, I learned that using Elmer's glue on transfer paper makes it very rigid when dried; it almost reminds me of plastic, which I'll definitely consider when doing other experiments.
Press enter or click to view image in full size
Figure 1
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

After doing all of these experiments, my next step is to investigate some patterns and designs from Nicaragua. I'd love to incorporate some elements of Nicaraguan crafts into my design and maybe even learn a bit more about my culture throughout the process.

November 16, 2021

During class, we discussed more things to consider about our lighting engines.

  • Luminance defines the way we could use light.
  • Harsh light creates a crisp shadow.
  • Diffused light creates a blurry shadow.
  • Consider adjustable light.
  • Consider if you want your lamp to sit on the table, hang it on the ceiling, or on the wall.
  • Avoid cardboard.
  • Create something that is continuous.
  • Play around with different types of adhesives.
  • Consider how you want to position your light (higher/lower).
  • Consider making a structure inside lightshade to hide bulb/make the light dimmer.
  • Consider experimenting with tearing.

After this, Steve and Stacie recommended that I figure out semantic differentials for my light engine by using a graph.

Press enter or click to view image in full size

November 17, 2021

The first thing I wanted to do was do some research on Nicaraguan crafts. I found lots of inspiration on crafts that are created for a yearly tradition called "La Griteria". Artisans weave palms and bamboo to make little baskets and "chichiles" which are similar to "maracas".

Press enter or click to view image in full size
Press enter or click to view image in full size

I tried to figure out how artisans weaved the palms. For this, I used Stonehenge paper because it is sturdy enough that it doesn't tear, but flexible enough that it can be weaved.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

I loved how the bottom part looked; the different layers showed a beautiful variation of colors and filtered the light nicely. The weaving was a bit tricky though. If I decide to do this I'm going to make more variations for the size of the strips like in the inspo pictures.

Get Julieta Montealegre’s stories in your inbox

Join Medium for free to get updates from this writer.

The next two experiments I did I started the same way as the last one. Then I decided to glue transfer paper triangles to filter the light.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

I like how the light illuminates the circular structure below; however, I don't find much use for it, which doesn't help my design.

For the next experiment, I made the "skeleton" of the light engine first. Then I put transfer paper over it. My idea was that I'd be able to see the skeleton, but it's a bit hard to see. The light was also a bit too bright for my liking.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

November 18, 2021

During class, I got separated into a group where we all created lamp engines with a similar purpose (mood lighting for personal relaxation). The lamp I liked best was the weaving one, so that is the one I decided to show for the group talk.

During the group discussion with Steve and Stacie, we covered some important aspects of creating a light engine for our purpose and criticized our prototypes. Some points they mentioned were the following:

  • Soft edges and angles contribute to the creation of a peaceful atmosphere.
  • Integrate necessities into the form (don't view the stand and the lampshade as something separate if visible).
  • Make sure to cover the socket.
  • Make sure that the front and back have continuity.
  • Tabs and seams can contribute to the design of the piece.

After the group discussion, I had some time to think about my piece and decided to make my lamp engine stand on my desk because I wanted the "star design" of the weaving to be more visible. In addition, I decided to create a bulb holder out of wire that would be hidden inside the piece.

Press enter or click to view image in full size

After making the bulb holder, I had some time to speak with Stacie about my project. I told her about my idea of putting the lamp on top of my desk, and she said I should focus on making the bulb holder steady and think about other weaving techniques.

November 20, 2021

Today I went to the art store and bought pliers, sturdier wire, and more paper (Stonehenge). After that, I made the light bulb holder. With the sturdier wire I created the basic structure, and with the less sturdy wire (gold one), I connected the base with the lightbulb cable to keep it in place.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

After that, I scaled up the weaving piece, made the top flat, and used different sizes of strips for the weaving. I used two different kinds of paper: Stonehenge for the main structure and mi-teintes for the weaving. I also covered the lightbulb with three layers of transfer paper to make the light dimmer.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

During the creation of this prototype, I ran through a lot of problems. First of all, I decided to use super glue because I thought it would make the process faster; however, it didn't work that way because I had to be more careful using it, and it was messier. Moreover, I decided to make the top flat, folded the edges incorrectly, and glued them to one of the longer pieces of paper before realizing my mistake. This folding and gluing made me struggle with the weaving because the strips weren't even, so, in some parts of the piece, that paper barely passed through. In addition, the lamp is not stable, nor it has a clean cylindrical shape.

After dwelling on my work, I made a list of things I wanted to improve because I wanted to create another prototype.

  • Consider making it tapered.
  • The original weaving prototype had a more organic design, so consider following that.
  • Make a cylinder that covers the lightbulb to make the light even dimmer.
  • Leave more gaps.
  • Make sure to put the paper side with pencil marking on the inside.
  • Make sure to make clean cuts so light doesn't show irregular edges.
  • Try to use tape to put together the weaving when doing the prototype, so it's easier to remove if I adjust the piece.

November 22, 2021

Today I planned to approach the weaving differently. Before, I used to cut various strips of paper and weave them individually. However, this time I used one whole sheet of paper, cut the strips but didn't separate them individually, so they remained attached to one piece. In addition, this time, the pieces that I weaved were the vertical ones instead of the horizontal ones, which turned out to be a much easier process.

I had a slightly different plan for the weaving at the beginning.

Press enter or click to view image in full size

Nonetheless, after playing around with the cutting, I decided to try a new original weaving technique. Because it was more of an improvised step, some measurements were a bit off, but I’m sure that the execution will turn out much better if I consider it from the beginning for next time.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

Once again, I ran into some problems, but they were more specific, hence, easier to fix.

  • Make the top part less long.
  • Make sure to make the curves from the weaving come out more like the ones in the bottom.
  • Measure the strips when weaving so they're even and make similar shadows.
  • Stop half the way with the curves and from the opposite end (top part) make the same pattern, so it’s more dynamic and creates more continuity throughout the piece.
  • Make sure to make a cylinder cover on the inside.
  • Buy tacky glue.
  • Because I used blotter paper, it was hard to weave (the paper is very stiff), so stick with Stonehenge for the whole piece.
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

Additional notes:

  • It took me around 5 hours to make this prototype.
  • Gift wrap tape doesn't show from the inside.

November 23, 2021

Today we did some peer review. Since I’ve been working around the prompt of ambient lighting, it was interesting to see my classmates' work addressing task-oriented lighting. The part I probably liked best about this peer review was figuring out what the light engine reminded us about. I found it interesting that I could make connections with pop culture and media elements by just looking at abstract forms, which taught me that I should be careful about what I design and create because maybe I’m missing something that other people could see.

Moving on to my object, I agree with most if not everything that my classmates said about it. It is nice to see that they wrote about things I knew I wanted to improve on. It worked as a reinforcement to let me know for sure that I needed to change certain things. The comments they wrote were:

  • Consider simplifying the form.
  • Consider making it smaller.
  • It can be associated with a basket or a cactus.
  • It works well on and off.
  • It works well as mood lighting.
Press enter or click to view image in full size

November 28, 2021

Thanksgiving break gave me some time to think about my project. I had somewhat of a vision of what I wanted to create, so the next step was to plan it out in a more detailed way. My main goal for this prototype was to make the light engine shorter, more simplified, and dimmer. I also wanted the outside weaving to start on both “ends” of the form, like coming in two directions. The purpose of this was to make the design more continuous and harmonic. Although my lamp is not perfectly continuous throughout its form, its elements are similar and harmonious enough that no matter what angle is being seen, it doesn't show a significant separation from the front and back. Even if people look at it from the “back,” it doesn't stop being aesthetically pleasing or without a purpose.

Press enter or click to view image in full size

I sketched what the design would look like without being folded, mainly to figure out the measurements. I didn't like how separated the weaving was in my first design, so I changed the measures a bit and added elements until I was pleased with how it looked. Also, I wanted the “front” and “back” to look harmonious, so I decided to replicate the seem in the back in the front of the piece. Again, this helps to make the design look more continuous.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

I also decided that, unlike the previous prototype, I would do the weaving after the cylindrical form was glued to make sure that it was constant and outside of the main structure. In addition, because I liked how a star design showed on top when the light was turned on, I decided to keep the top part the same; however, it wasn't going to go all the way down, remain on the top as a sort of cap for the light.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Stonehenge paper

For the last prototype, I decided to cover the lightbulb with some transfer paper, but it didn't look clean or dim the light enough. Hence, I decided to make a cylinder to cover the lightbulb because it seems cleaner and dims the light more. Moreover, I like that it is somewhat visible because I enjoy the contrast between an intricate design and a very clean shape.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

As usual, I ran into some problems during the making of the prototype. The first one was that tacky glue didn't dry as fast as I wanted. It didn't matter for some parts of the design because I could simply wait a bit longer; however, for some other parts (like the top part), having it dry so slowly hindered the cleanliness of the finished product and made it very hard to work on. Thus, for specific instances, I ended up using some superglue, which worked great. Moreover, I didn't glue some parts of the weaving correctly, so one end ended a bit shorter than the other; nonetheless, it is something easily fixable; I’ll have to pay closer attention to it next time. I’m also a bit worried about the weaving that extends outside of the main structure. My classmate Sapna told me that it could make the form look weak due to its delicate appearance. Lastly, I want the light to be even dimmer, so I’ll make the cylinder have two layers. I plan to discuss these issues with Steve and Stacie next class to see how I can improve.

Press enter or click to view image in full size
Press enter or click to view image in full size

Additional notes for the final light engine:

  • Pay close attention to measurements.
  • Use tape only on the inside of the object.
  • Use super glue for parts that require a fast drying time.
  • Make sure to erase any pencil markings that could be shown.
  • Add a second layer to the cylinder to make the light even dimmer.
  • Finally, discuss with Stacie and Steve about the structure of my piece and if it looks too delicate.

November 30, 2021

Today was a workday during class; I also got to ask Steve and Stacie questions about my project. My main concern was the structural integrity of my piece and the weaving style. I spoke to Stacie about it, and she mentioned that because the lamp's base isn't exactly circular, it hindered the piece's stability. The solution for this issue is to make a circular shape attached to the bottom of the light engine to shape it into a circular shape. Another positive aspect about this is that I could attach the cylinder to the circular shape, making the lamp consist of only one part, unlike before. I tried to make the base out of blotter paper, considering it was a bit stiffer and thicker than Stonehenge. Nonetheless, the paper was still thin, so it made attaching it to the main structure difficult. I also struggled with the measurement of the circle; I made it a bit too small. Finally, I used tape to put it together to see how it looked, and I liked the design; I have left to refine it.

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

Another thing that Stacie mentioned was to think about what I wanted to convey with the weaving and to either focus on geometric or organic. I’m leaning towards something a bit more organic, so I’m planning to make the structure strips different sizes; the weaving strips will remain the same size to have some consistency and not make the design too confusing.

December 1, 2021

The first thing that I wanted to do today was some quick sketches of different weaving designs, experimenting with various sizes. Once I was happy with one, I started to figure out the measurements for the weaving distance. After I had that done, I started to create the outside structure of the piece and then the weaving. Before gluing the weaving down, I used some tape to hold it to make sure that both sides of the weaving looked even and the weaving from the same size remained consistent.

Press enter or click to view image in full size

Next, I made the base out of museum board. I realized that the base wasn't thick enough so a friend recommended I glue two circular shapes together to make the base sturdier. I noticed that even though the base helped the bottom part of the light engine to be sturdier and circular, the top part remained as an ellipse and was not sturdy enough. Thus, I decided to make another base to put at the top, which also helped the strips at the top to be rounder and more even.

Press enter or click to view image in full size

The next step was to make the cylinder, which I also made using museum board. I did this because I wanted the light to be dimmer without needing to use two layers for the cylinder. Because museum board is very thick, it was a great material to make the light have the intensity that I wanted. Moreover, while I was figuring out ways to attach the cylinder to the structure, I thought about the possibility to create a subtle ring of light at the top. I liked this idea because it would make the overall design look more peaceful. The ring of light reminds me of either a sunset or a sunrise, which are very calm and beautiful views. In the end, I stuck with this idea so to make it possible I cut a hole in the top circle, then glue a piece of transfer paper over the entire surface of the circle, and lastly, glued a small circle (slightly smaller than the hole) of museum board in the center.

Press enter or click to view image in full size

Finally, I attached all the pieces together, glued the seams, and erased some pencil markings. At last, my light engine was finished!

Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size
Press enter or click to view image in full size

Final reflection:

I’m so excited that I get to show part of my culture through this piece, which was inspired by the work of Nicaraguan artisans and their weaving techniques. My light engine’s purpose is mood lighting, helping me relax and have a break from work. I wanted its form to be mesmerizing, with lots of curves and soft edges. I’m also content about the elements of surprise that I managed to include, such as the star shadow at the top, the ring of light, and the weaving shadows.

I’m surprised how much the last project helped me make this one. I had to make cylinders, cut circles, glue papers, and work with curves, which were tasks me and my classmates addressed. I used different techniques that my classmates taught in their videos and also applied what I learned from my experience.

At first, I was worried about the outcome of my light engine. However, through peer reviews and multiple experiments, I managed to create a piece I’m very proud of. It's amazing how this semester flew by, but I’m thankful for everything that I learned throughout this class and can’t wait to apply it to my future projects.