Annealing
Glass that cools too fast can break long after it looks finished
At the bench the bowl is still orange
at the lip, still taking the shape
of whatever touches it,
and she turns it, turns it, so it won’t sag.
Off the pipe, it would be easy
to set it on the steel
and let the room do the rest.
It would look finished in an hour.It would hold water for a week.
Then some ordinary morning,
a tap, a change of weather,
and it would open along a line no one saw go in.
So it goes in the annealer
instead, into a heat
just under the heat that made it,
and the dial comes down a few degrees an hourall night. Nobody touches it.
Nobody checks. That is the work:
not the fire, not the breath,
but the long refusal to hurry it back into the room.In the morning she holds it up
between two sheets of polarising film,
looking for the colours strain makes
when it is still caught inside,and finds clear glass. Only clear glass.
Something that was very hot
and is now just warm enough
to hand to someone.
Conclusion
Get Prose Pulse’s stories in your inbox
Join Medium for free to get updates from this writer.
In glassmaking, annealing means cooling a finished piece slowly in a kiln, called an annealer or lehr, so stress does not stay locked inside it. Glass that cools too fast can look perfect and still crack later from a small knock or a change in temperature. Makers sometimes check for leftover strain by viewing a piece between polarising filters, where trapped stress shows up as bands of colour. The poem stays with that slow middle stage, after the heat and before anyone can safely hold what was made.







