Patterning
To continue our experiment from last week, Edward, Kingsley and I decided to test how latex will react when attached to certain patterns.
Before starting the testings, we design a few patterns which we think might be able to create a curvature on the latex when stretched and attached. We then laser cut the pattern designs on a 3 mm poplar plywood.
We first experimented with Pattern 6 as an initial test to see how the latex could react. The result of the first experiment is a fail as the latex breaks the pattern.
However, from the experiment we conclude that the reason for the breakage is because we stretched the latex too much; In this case, we stretched the latex at 80% of its original size causing a lot more force to act on the plywood resulting in breakage. It might also be because of the shape of the patterns which causes the force to act on a few points of the plywood.
Get Sarah Xaviera’s stories in your inbox
Join Medium for free to get updates from this writer.
For the next experiment, we use Pattern 2 to test the reaction. For this experiment, we were able to get a slight curvature on the end result which is what we were after.
To continue on from that, we also tested the latex on Pattern 5 which causes 2 opposite corners of the latex to bend.
For the next latex experiment, we tested on Pattern 3 to see how the latex will will curve with the pattern. The experiment with Pattern 3 has the best result with a few down curving on the latex.
For our last pattern experiment, we decided to use nylon spandex to see how it can react with the patterns. The result is not satisfying since the fabric does not react to the shape of the patterns even though the fabric is stretched to its maximum.
Conclusion
In terms of bending and reacting to the patterns, latex has a better property than the nylon spandex. In the next few days, what we aim to do is to think of a pattern design which can allow the fabric to curve on all four sides.









