13 files changed, 0 insertions, 1159 deletions
diff --git a/src/scripts/LICENSE.LGPL.txt b/src/scripts/LICENSE.LGPL.txt
deleted file mode 100644
index 2db28fb5..00000000
--- a/src/scripts/LICENSE.LGPL.txt
+++ /dev/null
@@ -1,514 +0,0 @@
-          GNU LESSER GENERAL PUBLIC LICENSE
-
- The Qt GUI Toolkit is Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
- Contact: Nokia Corporation ([email protected])
-
- You may use, distribute and copy the Qt GUI Toolkit under the terms of
- GNU Lesser General Public License version 2.1, which is displayed below.
-
--------------------------------------------------------------------------
-
-          GNU LESSER GENERAL PUBLIC LICENSE
-               Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-                Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-          GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-                NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-             END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
-
-
diff --git a/src/scripts/README b/src/scripts/README
deleted file mode 100644
index aa49d282..00000000
--- a/src/scripts/README
+++ /dev/null
@@ -1,39 +0,0 @@
-This directory contains miscellaneous utility scripts for use with Qt3D.
-
-filter-qmldump.pl
-=================
-
-Use this script to regenerate the library.xml files after making changes
-to the properties or structure of the QML bindings.
-
-It expects a file called "library.xml" to be in the current directory, and
-requires a single command line argument, which is a string matching the 
-module name to filter on.
-
-Typical use:
-
-1) Build and install Qt3D into a given Qt at $QTDIR
-2) Ensure qmldump is available in your $PATH (see below)
-3) Run qmldump to generate the library.xml file:
-   qmldump $QTDIR/imports Qt3D > library.xml
-4) Filter the output to just include the Qt3D module:
-   filter-qmldump.pl Qt3D > library-qt3d.xml
-
-Repeat 3) & 4) for the Shapes library:
-   qmldump $QTDIR/imports/Shapes Qt3D.Shapes > library.xml
-   filter-qmldump.pl Qt3D > library-qt3d.xml
-
-To generate the plugins.qmltypes, you first need a qmldump binary generated from
-sources shipped with Qt Creator version less than 2.2.  On Mac these are inside
-the app bundle, other platforms vary.  If all else fails get the sources from the
-Qt Creator repo.
-
-To build qmldump you need access to private headers, so therefore it must be
-built against a source build of Qt.  On Mac it is helpful to build qmldump with
-"qmake CONFIG-=app_bundle" so that you get a regular command-line binary.
-
-In the above note that $QTDIR points to the root of the Qt where Qt3D is installed.
-
-Check the contents of library.xml above and ensure it is XML - not yaml.  If you
-see some curly braces { } - then the version of qmldump source you used was for
-Qt Creator > 2.2 - you somehow have the later version qmldump sources.
diff --git a/src/scripts/build_mac_package.sh b/src/scripts/build_mac_package.sh
deleted file mode 100755
index 39fbc387..00000000
--- a/src/scripts/build_mac_package.sh
+++ /dev/null
@@ -1,125 +0,0 @@
-#!/bin/bash
-#############################################################################
-##
-## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-## All rights reserved.
-## Contact: Nokia Corporation ([email protected])
-##
-## This file is part of the QtQuick3D module of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## GNU Lesser General Public License Usage
-## This file may be used under the terms of the GNU Lesser General Public
-## License version 2.1 as published by the Free Software Foundation and
-## appearing in the file LICENSE.LGPL included in the packaging of this
-## file. Please review the following information to ensure the GNU Lesser
-## General Public License version 2.1 requirements will be met:
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## In addition, as a special exception, Nokia gives you certain additional
-## rights. These rights are described in the Nokia Qt LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU General
-## Public License version 3.0 as published by the Free Software Foundation
-## and appearing in the file LICENSE.GPL included in the packaging of this
-## file. Please review the following information to ensure the GNU General
-## Public License version 3.0 requirements will be met:
-## http://www.gnu.org/copyleft/gpl.html.
-##
-## Other Usage
-## Alternatively, this file may be used in accordance with the terms and
-## conditions contained in a signed written agreement between you and Nokia.
-##
-##
-##
-##
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -e
-
-APP=QtQuick3D
-
-PRO=quick3d.pro
-
-if [[ -z "$1" ]]; then
-    echo "Usage: build_bundle.sh 1.2.3"
-    echo "(where 1.2.3 is the version number)"
-    exit 1;
-fi
-
-if [[ ! -f ./quick3d.pro ]]; then
-    echo "Could not find quick3d.pro in current directory."
-    echo "This script should be run from the root of a Qt3D source tree."
-    exit 1;
-fi
-
-VER=$1
-
-echo "Building ${APP}..."
-qmake -makefile -spec macx-g++ -r CONFIG+=release CONFIG+=package quick3d.pro
-make $(JOBS)
-
-DIST=dist
-DEV=dev
-DEV_PKG_ROOT="$DIST/$DEV/Pkg_Root"
-mkdir -p $DEV_PKG_ROOT
-INSTALL_ROOT=$PWD/dist/dev/Pkg_Root make $(JOBS) install
-
-make docs
-DOC_LOC="Developer/Documentation/QtQuick3D"
-mkdir -p "$DEV_PKG_ROOT/$DOC_LOC"
-mv doc/html "$DEV_PKG_ROOT/$DOC_LOC"
-
-DEV_PKG_RES="$DIST/$DEV/Resources"
-mkdir -p $DEV_PKG_RES
-cp src/scripts/mac_installer_background.png $DEV_PKG_RES/background.png
-
-XMPL=examples
-XMPL_PKG_ROOT="$DIST/$XMPL/Pkg_Root"
-mkdir -p "$XMPL_PKG_ROOT"
-
-XMPL_PKG_RES="$DIST/$XMPL/Resources"
-mkdir -p $XMPL_PKG_RES
-cp src/scripts/mac_installer_background.png $XMPL_PKG_RES/background.png
-
-XMPL_LOC="Applications/QtQuick3D Examples"
-mkdir -p "${XMPL_PKG_ROOT}/$XMPL_LOC"
-mv "${DEV_PKG_ROOT}/Developer/Tools/Qt" "${XMPL_PKG_ROOT}/$XMPL_LOC"
-
-RELEASE_DIR="../${APP}-${VER}"
-mkdir -p "${RELEASE_DIR}"
-
-# http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man1/packagemaker.1.html
-# ...or see $PKGMKR -help for options
-# some useful tips at http://homepage.mac.com/simx/technonova/tips/packagemaker_and_installer.html
-# but a bit out of date - eg options now have --switch syntax and plist files are not used
-
-PKGMGR="/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker"
-
-## TODO: create VolumeCheck script to ensure 4.7.2 is installed
-PKG="${RELEASE_DIR}/${APP}-${VER}-${DEV}.pkg"
-$PKGMGR --root "$DEV_PKG_ROOT" \
-    --id "com.nokia.qtquick3d.${DEV}" \
-    --resources "$DEV_PKG_RES" \
-    --title "Core Developer Tools" \
-    --target 10.5 --version "$VER" --verbose --out "$PKG"
-
-PKG="${RELEASE_DIR}/${APP}-${VER}-${XMPL}.pkg"
-$PKGMGR --root "$XMPL_PKG_ROOT" \
-    --id "com.nokia.qtquick3d.${XMPL}" \
-    --resources "$XMPL_PKG_RES" \
-    --title "Example Applications" \
-    --target 10.5 --version "$VER" --verbose --out "$PKG"
-
-DMG="../${APP}-${VER}.dmg"
-
-echo "Placing packages into disk image"
-hdiutil create -srcfolder ${RELEASE_DIR} ${DMG}
-hdiutil internet-enable -yes ${DMG}
-
-echo "New distributable ready in ${DMG}"
diff --git a/src/scripts/build_src_package.sh b/src/scripts/build_src_package.sh
deleted file mode 100755
index 70d51884..00000000
--- a/src/scripts/build_src_package.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/bash
-#############################################################################
-##
-## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-## All rights reserved.
-## Contact: Nokia Corporation ([email protected])
-##
-## This file is part of the QtQuick3D module of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## GNU Lesser General Public License Usage
-## This file may be used under the terms of the GNU Lesser General Public
-## License version 2.1 as published by the Free Software Foundation and
-## appearing in the file LICENSE.LGPL included in the packaging of this
-## file. Please review the following information to ensure the GNU Lesser
-## General Public License version 2.1 requirements will be met:
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## In addition, as a special exception, Nokia gives you certain additional
-## rights. These rights are described in the Nokia Qt LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU General
-## Public License version 3.0 as published by the Free Software Foundation
-## and appearing in the file LICENSE.GPL included in the packaging of this
-## file. Please review the following information to ensure the GNU General
-## Public License version 3.0 requirements will be met:
-## http://www.gnu.org/copyleft/gpl.html.
-##
-## Other Usage
-## Alternatively, this file may be used in accordance with the terms and
-## conditions contained in a signed written agreement between you and Nokia.
-##
-##
-##
-##
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-
-usage() {
-    cat <<USAGE
-usage:
-  $0 <refspec> <version>
-
-  Creates tar and zip source package from <refspec> and documentation-zip from current checkout.
-  Run it from inside [a copy of] the git checkout of qt3d source.
-
-  Generated package files and directories are named after <version>.
-
-  Make sure the bin path for a valid Qt with qdoc3 is in the $PATH.
-
-  example:
-    env PATH=/path/to/Qt/bin:$PATH src/scripts/build_src_package.sh origin/tp1 1.0-tp1
-USAGE
-    exit 1
-}
-
-## Command line parameters
-if [[ $# != 2 ]]; then
-    usage;
-fi
-
-set -e
-
-QDOC3=$(qmake -query QT_INSTALL_BINS)/qdoc3
-
-echo "Using Qt ${QDOC3} to build doc"
-test -f quick3d.pro || usage
-
-BRANCH=$1
-VERSION=$2
-echo "Creating tar archive..."
-git archive --format=tar --prefix=qtquick3d-${VERSION}-src/ ${BRANCH} | gzip > ../qtquick3d-${VERSION}-src.tar.gz || exit 1
-echo "Creating zip archive..."
-git archive --format=zip --prefix=qtquick3d-${VERSION}-src/ ${BRANCH} > ../qtquick3d-${VERSION}-src.zip || exit 1
-echo "Creating documentation..."
-rm -r -f doc/html
-qmake quick3d.pro -spec macx-g++ CONFIG+=package >/dev/null || exit 1
-make docs || exit 1
-cd doc
-cp -r html qtquick3d-${VERSION}
-zip -r ../../qtquick3d-${VERSION}-doc.zip qtquick3d-${VERSION} >/dev/null
-rm -r qtquick3d-${VERSION}
diff --git a/src/scripts/build_win_package.bat b/src/scripts/build_win_package.bat
deleted file mode 100644
index f428d2e1..00000000
--- a/src/scripts/build_win_package.bat
+++ /dev/null
@@ -1,88 +0,0 @@
-:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-::
-:: Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-:: All rights reserved.
-:: Contact: Nokia Corporation ([email protected])
-::
-:: This file is part of the FOO module of the Qt Toolkit.
-::
-:: $QT_BEGIN_LICENSE:LGPL$
-:: GNU Lesser General Public License Usage
-:: This file may be used under the terms of the GNU Lesser General Public
-:: License version 2.1 as published by the Free Software Foundation and
-:: appearing in the file LICENSE.LGPL included in the packaging of this
-:: file. Please review the following information to ensure the GNU Lesser
-:: General Public License version 2.1 requirements will be met:
-:: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-::
-:: In addition, as a special exception, Nokia gives you certain additional
-:: rights. These rights are described in the Nokia Qt LGPL Exception
-:: version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-::
-:: GNU General Public License Usage
-:: Alternatively, this file may be used under the terms of the GNU General
-:: Public License version 3.0 as published by the Free Software Foundation
-:: and appearing in the file LICENSE.GPL included in the packaging of this
-:: file. Please review the following information to ensure the GNU General
-:: Public License version 3.0 requirements will be met:
-:: http://www.gnu.org/copyleft/gpl.html.
-::
-:: Other Usage
-:: Alternatively, this file may be used in accordance with the terms and
-:: conditions contained in a signed written agreement between you and Nokia.
-::
-::
-::
-::
-::
-:: $QT_END_LICENSE$
-::
-:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-::
-:: Before running this script ensure that the %PATH% has the location of:
-::    - the correct qmake for the Qt to build against
-::    - the compiler and build tools, eg nmake
-::         for these first two, use the C:\Qt\<ver>\bin\qtvars.bat vsvars command
-::    - NSIS compiler, "makensis"
-::         set PATH=%PATH%;"C:\Program Files (x86)\NSIS"
-::         NSIS needs the custom license plugin - if its not installed get it
-::         from http://nsis.sourceforge.net/CustomLicense_plug-in
-:: Run this script from the root of a complete source tree of Qt3D, eg
-::    mkdir C:\build\qt
-::    cd C:\build\qt
-::    mkdir quick3d_mk_win_pkg
-::    echo .git >exclude
-::    xcopy /EXCLUDE:exclude /S C:\depot\qt\quick3d quick3d_mk_win_pkg
-::    cd quick3d_mk_win_pkg
-:: Use jom if possible - put jom in the path if you want faster compiles
-::    set PATH=%PATH%;C:\QtSDK\QtCreator\bin
-::    src\scripts\build_win_package.bat
-
-where jom.exe
-if %ERRORLEVEL% NEQ 0 (
-    SET MAKE_PRG=nmake
-) else (
-    SET MAKE_PRG=jom
-)
-
-mkdir tmp
-
-qmake -query QT_VERSION >tmp\qt_version
-set /P QT_VERSION= <tmp\qt_version
-
-qmake -query QT_INSTALL_PREFIX >tmp\qt_prefix
-set /P QT_PREFIX= <tmp\qt_prefix
-set QT_PREFIX_PATH=%QT_PREFIX:~2%
-
-:: On windows if the qt3d.prf and qt3dquick.prf exist in the Qt, the build will fail
-:: with impenetrable link errors.  This should not happen but might if you are trying
-:: to debug the installer scripts, and do something odd.
-del %QTDIR%\mkspecs\features\qt3d*
-
-qmake.exe quick3d.pro -spec win32-msvc2008 CONFIG+=release CONFIG+=package
-
-:: This has to be the full path, but without the drive letter...
-set INSTALL_ROOT=%CD:~2%\tmp
-%MAKE_PRG% install
-%MAKE_PRG% docs
-makensis /DQT_VERSION=%QT_VERSION% /DQT_PREFIX_PATH=%QT_PREFIX_PATH% /NOCD src\scripts\build_win_package.nsi
diff --git a/src/scripts/build_win_package.nsi b/src/scripts/build_win_package.nsi
deleted file mode 100644
index b20f4add..00000000
--- a/src/scripts/build_win_package.nsi
+++ /dev/null
@@ -1,218 +0,0 @@
-!include LogicLib.nsh
-!include nsDialogs.nsh
-
-!define PRODUCT_NAME "QtQuick3D"
-!define PRODUCT_VERSION "1.0-tp1"
-!define PRODUCT_PUBLISHER "Nokia"
-!define PRODUCT_WEB_SITE "http://doc.qt.nokia.com/qt-quick3d-snapshot/"
-!define PRODUCT_DIR_REGKEY "Software\Microsoft\Windows\CurrentVersion\App Paths\qglinfo.exe"
-!define PRODUCT_UNINST_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}"
-!define PRODUCT_UNINST_ROOT_KEY "HKLM"
-
-; MUI 1.67 compatible ------
-!include "MUI.nsh"
-
-; MUI Settings
-!define MUI_ABORTWARNING
-!define MUI_ICON "src\scripts\qtquick3d.ico"
-!define MUI_UNICON "${NSISDIR}\Contrib\Graphics\Icons\modern-uninstall.ico"
-!define MUI_WELCOMEFINISHPAGE_BITMAP "src\scripts\win_installer_background.bmp"
-!define MUI_WELCOMEPAGE_TITLE "${PRODUCT_NAME} Setup"
-!define MUI_WELCOMEPAGE_TEXT "${PRODUCT_NAME} will be installed into Qt ${QT_VERSION}, found in $INSTDIR.  If you do not want ${PRODUCT_NAME} installed there, click cancel below."
-
-; Welcome page
-!insertmacro MUI_PAGE_WELCOME
-; License page
-!insertmacro MUI_PAGE_LICENSE "src\scripts\LICENSE.LGPL.txt"
-; Directory page
-; Disable this since we only install where we detect the right Qt
-; !insertmacro MUI_PAGE_DIRECTORY
-; Instfiles page
-!insertmacro MUI_PAGE_INSTFILES
-!define MUI_FINISHPAGE_NOAUTOCLOSE
-; Finish page
-Page custom DisplayWelcomeMessage
-!define MUI_FINISHPAGE_RUN $INSTDIR\quick3d\bin\run_start_program.bat
-!define MUI_FINISHPAGE_RUN_TEXT "Run QtQuick3D QGLInfo program"
-!define MUI_FINISHPAGE_LINK "QtQuick3D documentation"
-!define MUI_FINISHPAGE_LINK_LOCATION $INSTDIR\quick3d\doc\html\index.html
-
-!insertmacro MUI_PAGE_FINISH
-
-; Uninstaller pages
-!insertmacro MUI_UNPAGE_INSTFILES
-
-; Language files
-!insertmacro MUI_LANGUAGE "English"
-
-; MUI end ------
-
-; Where make install puts all the files
-!define MK_INST_ROOT tmp
-
-Name "${PRODUCT_NAME} ${PRODUCT_VERSION}"
-OutFile "${PRODUCT_NAME}-${PRODUCT_VERSION}.exe"
-InstallDir "$PROGRAMFILES\Qt\${PRODUCT_VERSION}\quick3d"
-InstallDirRegKey HKLM "${PRODUCT_DIR_REGKEY}" ""
-ShowInstDetails show
-ShowUnInstDetails show
-
-; HKCU\Software\Trolltech\Versions\DefaultQtVersion REG_SZ "${QT_VERSION}"
-; HKCU\Software\Trolltech\Versions\${QT_VERSION}\InstallDir REG_SZ "C:\Qt\${QT_VERSION}"
-
-Function .onInit
-  LogSet on
-  ReadRegStr $0 HKCU "Software\Trolltech\Versions\${QT_VERSION}" "InstallDir"
-  ${If} $0 == ""
-    MessageBox MB_ICONEXCLAMATION "Please install Qt v${QT_VERSION} MSVC from http:\\qt.nokia.com\downloads before installing ${PRODUCT_NAME} ${PRODUCT_VERSION}"
-    Abort
-  ${EndIf}
-  StrCpy $INSTDIR $0
-FunctionEnd
-
-Function DisplayWelcomeMessage
-        ; Create the temporary plugins directory
-        InitPluginsDir
-
-        ; Put the welcome message in the temporary plugins directory.
-        ; The plugins directory is deleted when the installer quits.
-        File "/oname=$PLUGINSDIR\windows-install.txt" "src\scripts\windows-install.txt"
-
-        nsDialogs::Create 1018
-        Pop $0
-
-        nsDialogs::CreateControl /NOUNLOAD ${__NSD_Text_CLASS} ${DEFAULT_STYLES}|${WS_TABSTOP}|${ES_MULTILINE} ${__NSD_Text_EXSTYLE} 20 45 325 200 ''
-        Pop $1
-
-        CustomLicense::LoadFile "$PLUGINSDIR\windows-install.txt" $1
-        nsDialogs::Show
-
-FunctionEnd
-
-Section "MainSection" SEC01
-  SetOverwrite try
-  CreateDirectory "$SMPROGRAMS\QtQuick3D"
-  CreateDirectory "$SMPROGRAMS\QtQuick3D\Examples"
-  CreateDirectory "$SMPROGRAMS\QtQuick3D\Demos"
-
-  ; For the CreateShortCut command, the outpath is actually used for the working directory.
-  ; By setting $INSTDIR\bin to the working directory all these lnk targets should be able
-  ; to find their dependent dll's without needing to set the path
-  SetOutPath "$INSTDIR\bin"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\QtQuick3D.lnk" "$INSTDIR\quick3d\bin\qglinfo.exe"
-  CreateShortCut "$DESKTOP\QtQuick3D.lnk" "$INSTDIR\quick3d\bin\qglinfo.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Basket.lnk" "$INSTDIR\quick3d\bin\basket_qml.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Cube.lnk" "$INSTDIR\quick3d\bin\cube_qml.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Forest.lnk" "$INSTDIR\quick3d\bin\forest_qml.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Lander.lnk" "$INSTDIR\quick3d\bin\lander.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Matrix Animation.lnk" "$INSTDIR\quick3d\bin\matrix_animation.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Monkey God.lnk" "$INSTDIR\quick3d\bin\monkeygod.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Moon.lnk" "$INSTDIR\quick3d\bin\moon.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Photo Room.lnk" "$INSTDIR\quick3d\bin\photoroom.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Shaders.lnk" "$INSTDIR\quick3d\bin\shaders.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Sphere.lnk" "$INSTDIR\quick3d\bin\sphere.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Teapot.lnk" "$INSTDIR\quick3d\bin\teapot_qml.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Teapot Bounce.lnk" "$INSTDIR\quick3d\bin\teapot_bounce_qml.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Basket (C++).lnk" "$INSTDIR\quick3d\bin\basket.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Builder.lnk" "$INSTDIR\quick3d\bin\builder.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Cube (C++).lnk" "$INSTDIR\quick3d\bin\cube.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Cylinder.lnk" "$INSTDIR\quick3d\bin\cylinder.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Geometry.lnk" "$INSTDIR\quick3d\bin\geometry.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Graphicsview.lnk" "$INSTDIR\quick3d\bin\graphicsview.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Nesting.lnk" "$INSTDIR\quick3d\bin\nesting.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Tank.lnk" "$INSTDIR\quick3d\bin\tank.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Examples\Teapot (C++).lnk" "$INSTDIR\quick3d\bin\teapot.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Model Viewer.lnk" "$INSTDIR\quick3d\bin\model_viewer.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Robo Bounce.lnk" "$INSTDIR\quick3d\bin\robo_bounce.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Tea Service.lnk" "$INSTDIR\quick3d\bin\tea_service.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Cube House.lnk" "$INSTDIR\quick3d\bin\cubehouse.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Page Flip.lnk" "$INSTDIR\quick3d\bin\pageflip.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Photo-browser 3D.lnk" "$INSTDIR\quick3d\bin\photobrowser3d.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Shapes.lnk" "$INSTDIR\quick3d\bin\shapes.exe"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Demos\Tea Service (C++).lnk" "$INSTDIR\quick3d\bin\teaservice.exe"
-
-  ; bin imports include lib mkspecs plugins quick3d
-  SetOutPath "$INSTDIR\quick3d\bin"
-  File "${MK_INST_ROOT}${QT_PREFIX_PATH}\bin\*.exe"
-  File /r "${MK_INST_ROOT}${QT_PREFIX_PATH}\quick3d\resources"
-  SetOutPath "$INSTDIR\lib"
-  File "${MK_INST_ROOT}${QT_PREFIX_PATH}\bin\*.lib"
-  SetOutPath "$INSTDIR\quick3d\doc"
-  File /r "doc\html"
-  SetOutPath "$INSTDIR\bin"
-  File "${MK_INST_ROOT}${QT_PREFIX_PATH}\bin\*.dll"
-  SetOutPath "$INSTDIR"
-  File /r "${MK_INST_ROOT}${QT_PREFIX_PATH}\imports"
-  File /r "${MK_INST_ROOT}${QT_PREFIX_PATH}\include"
-  File /r "${MK_INST_ROOT}${QT_PREFIX_PATH}\mkspecs"
-  File /r "${MK_INST_ROOT}${QT_PREFIX_PATH}\plugins"
-
-  ClearErrors
-  FileOpen $0 $INSTDIR\quick3d\bin\run_start_program.bat w
-  IfErrors done
-  FileWrite $0 "start /D $INSTDIR\bin $INSTDIR\quick3d\bin\qglinfo.exe"
-  FileClose $0
-  done:
-SectionEnd
-
-Section -AdditionalIcons
-  SetOutPath $INSTDIR
-  WriteIniStr "$INSTDIR\${PRODUCT_NAME}.url" "InternetShortcut" "URL" "${PRODUCT_WEB_SITE}"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Website.lnk" "$INSTDIR\${PRODUCT_NAME}.url"
-  CreateShortCut "$SMPROGRAMS\QtQuick3D\Uninstall.lnk" "$INSTDIR\quick3d\uninst.exe"
-SectionEnd
-
-Section -Post
-  WriteUninstaller "$INSTDIR\quick3d\uninst.exe"
-  WriteRegStr HKLM "${PRODUCT_DIR_REGKEY}" "" "$INSTDIR\quick3d\bin\qglinfo.exe"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayName" "$(^Name)"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "UninstallString" "$INSTDIR\quick3d\uninst.exe"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayIcon" "$INSTDIR\quick3d\bin\qglinfo.exe"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayVersion" "${PRODUCT_VERSION}"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "URLInfoAbout" "${PRODUCT_WEB_SITE}"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "Publisher" "${PRODUCT_PUBLISHER}"
-  WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "InstallRoot" "$INSTDIR"
-SectionEnd
-
-
-Function un.onUninstSuccess
-  HideWindow
-  MessageBox MB_ICONINFORMATION|MB_OK "$(^Name) was successfully removed from your computer."
-FunctionEnd
-
-Function un.onInit
-  ; LogSet on
-  ReadRegStr $0 ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "InstallRoot"
-  StrCpy $INSTDIR $0
-  MessageBox MB_ICONQUESTION|MB_YESNO|MB_DEFBUTTON2 "Are you sure you want to completely remove $(^Name) and all of its components?" IDYES +2
-  Abort
-FunctionEnd
-
-Section Uninstall
-  Delete "$INSTDIR\${PRODUCT_NAME}.url"
-  Delete "$INSTDIR\quick3d\uninst.exe"
-  RMDir /r "$INSTDIR\plugins\sceneformats"
-  Delete "$INSTDIR\plugins\imageformats\qtga4.dll"
-  Delete "$INSTDIR\mkspecs\features\qt3dquick.prf"
-  Delete "$INSTDIR\mkspecs\features\qt3d.prf"
-  Delete "$INSTDIR\lib\Qt3DQuick.*"
-  Delete "$INSTDIR\lib\Qt3DQuickd.*"
-  Delete "$INSTDIR\lib\Qt3D.*"
-  Delete "$INSTDIR\lib\Qt3Dd.*"
-  Delete "$INSTDIR\bin\Qt3DQuick.*"
-  Delete "$INSTDIR\bin\Qt3DQuickd.*"
-  Delete "$INSTDIR\bin\Qt3D.*"
-  Delete "$INSTDIR\bin\Qt3Dd.*"
-  RMDir /r "$INSTDIR\include\Qt3D"
-  RMDir /r "$INSTDIR\include\Qt3DQuick"
-  RMDir /r "$INSTDIR\imports\Qt3D"
-  RMDir /r "$INSTDIR\quick3d"
-
-  Delete "$DESKTOP\QtQuick3D.lnk"
-  RMDir /r "$SMPROGRAMS\QtQuick3D"
-  RMDir /r "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\QtQuick3D"
-
-  DeleteRegKey ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}"
-  DeleteRegKey HKLM "${PRODUCT_DIR_REGKEY}"
-  SetAutoClose true
-SectionEnd
diff --git a/src/scripts/filter-qmldump.pl b/src/scripts/filter-qmldump.pl
deleted file mode 100755
index 84686898..00000000
--- a/src/scripts/filter-qmldump.pl
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/usr/bin/perl
-#############################################################################
-##
-## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
-## All rights reserved.
-## Contact: Nokia Corporation ([email protected])
-##
-## This file is part of the QtQuick3D module of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## GNU Lesser General Public License Usage
-## This file may be used under the terms of the GNU Lesser General Public
-## License version 2.1 as published by the Free Software Foundation and
-## appearing in the file LICENSE.LGPL included in the packaging of this
-## file. Please review the following information to ensure the GNU Lesser
-## General Public License version 2.1 requirements will be met:
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## In addition, as a special exception, Nokia gives you certain additional
-## rights. These rights are described in the Nokia Qt LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU General
-## Public License version 3.0 as published by the Free Software Foundation
-## and appearing in the file LICENSE.GPL included in the packaging of this
-## file. Please review the following information to ensure the GNU General
-## Public License version 3.0 requirements will be met:
-## http://www.gnu.org/copyleft/gpl.html.
-##
-## Other Usage
-## Alternatively, this file may be used in accordance with the terms and
-## conditions contained in a signed written agreement between you and Nokia.
-##
-##
-##
-##
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-use strict;
-use warnings;
-
-use XML::XPath;
-use XML::XPath::XMLParser;
-
-my $mod = shift or die "Usage: filter-qmldump.pl <module name>\n";
-
-warn "Filtering for modules in $mod\n";
-
-my $xp = XML::XPath->new(filename => 'library.xml');
-
-my $nodeset = $xp->find("//type/exports/export[\@module=\'$mod\']/../..");
-
-print "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n";
-print "<module>\n";
-
-foreach my $node ($nodeset->get_nodelist)
-{
-    print "    " . XML::XPath::XMLParser::as_string($node) . "\n";
-}
-
-print "<\\module>\n";
diff --git a/src/scripts/mac-install.rtf b/src/scripts/mac-install.rtf
deleted file mode 100644
index f596b71c..00000000
--- a/src/scripts/mac-install.rtf
+++ /dev/null
@@ -1,13 +0,0 @@
-{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf350
-{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
-{\colortbl;\red255\green255\blue255;}
-\paperw11900\paperh16840\vieww12000\viewh15840\viewkind0
-\deftab720
-\pard\pardeftab720\sl276\slmult1\sa200\ql\qnatural
-
-\f0\b\fs22 \cf0 Thanks for installing QtQuick3D! \
-
-\b0 To create applications with QtQuick3D simply open QtCreator, and ensure that your new project uses the "Qt in Path" under the "Auto-detected" section of the Qt Versions.  See the Qt Creator's Preference pane and choose the "Qt 4" tab.\
-You can also compile applications from the command line by using the command "quake".\
-\
-}
-\ No newline at end of file
diff --git a/src/scripts/mac_installer_background.png b/src/scripts/mac_installer_background.png
deleted file mode 100644
index 0f2de686..00000000
--- a/src/scripts/mac_installer_background.png
+++ /dev/null
diff --git a/src/scripts/qtquick3d.ico b/src/scripts/qtquick3d.ico
deleted file mode 100644
index b3b85e37..00000000
--- a/src/scripts/qtquick3d.ico
+++ /dev/null
diff --git a/src/scripts/win_installer_background.bmp b/src/scripts/win_installer_background.bmp
deleted file mode 100644
index 785c943d..00000000
--- a/src/scripts/win_installer_background.bmp
+++ /dev/null
diff --git a/src/scripts/windows-install.rtf b/src/scripts/windows-install.rtf
deleted file mode 100644
index e9c5f43d..00000000
--- a/src/scripts/windows-install.rtf
+++ /dev/null
diff --git a/src/scripts/windows-install.txt b/src/scripts/windows-install.txt
deleted file mode 100644
index 909b0372..00000000
--- a/src/scripts/windows-install.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Thanks for installing QtQuick3D!
-
-To create applications with QtQuick3D
-simply open QtCreator, and ensure that
-your new project uses the Qt installed
-at C:\Qt\4.7.3.
-
-You can also compile applications from
-the command line by using the Start Menu
-item : "Qt 4.7.3 Command Prompt".