

Yes, being forced to sell your own mind is infinitely worse. You no longer have your own thoughts; your mind belongs to your employers. That is absolutely, 1000% worse than selling physical labor.


Yes, being forced to sell your own mind is infinitely worse. You no longer have your own thoughts; your mind belongs to your employers. That is absolutely, 1000% worse than selling physical labor.


No, you misunderstand: ALL labor under capitalism is exploitative. ‘Dangerous’ and ‘difficult’ has nothing to do with it. The system is set up so that your labor must be used for the benefit of someone else in order to obtain the bare necessities of survival, and you don’t get the full value of your labor. It doesn’t matter if that’s working in an office doing spreadsheets all day, or as a sex work; ALL labor is exploited under capitalism.
Work is work; sex workers are workers.


Given that a lot of guns turned in to buyback programs have been inoperable… No. Also, there was at least once case of a guy printing a lot of pistol frames–and for most pistols, the frame is legally the firearm–and then turning them in for cash. The filament for the printer cost far less than the cash he received for each one, so he made a pretty significant profit.


Having spoken with a few women that have done things adjacent to pornography, their regrets are mostly in regards to the way they were treated by people that were not in the industry. The escorts I’ve spoken with enjoy the work itself, although not necessarily all of the customers.
What you’re saying about the horrors of pornography and prostitution apply to ALL people that need to work for a living. The company I work for buys my time, the product of my labor–which they sell for many times what I’m paid–and even my dignity by forcing me to wear a uniform of their choice. I absolutely do not like the customers that ultimately purchase the products of my labor, but I have little choice if I want to have a place to live, and food to eat.


He seems to be a cool dude. IIRC, one of the big things that he does is organize feeding homeless people in Texas.


You might like Punk With a Camera.


I’m trying to find a ticket to a show at Club Soda; I can’t seem to find them on the resale market… It’s only a ten hour drive, that’s cool, right?


In re: TERFs, transgender people make up a very small part of the general population, roughly .5%. The odds that any given TERF would get picked up by an UBER driver that is a transwoman are very low.
I suspect–and I’d need to be checked on this–that you would need to have gotten your gender marker changed on your driver’s license in order for Uber to correctly identify your gender. And that makes it an even smaller subset of trangender people that could trigger TERFs. OTOH, I could absolutely see a TERF going ballistic over a cisgender woman that wasn’t fully gender-conforming…
The good news is that, relatively speaking, a water heater isn’t too expensive, and you can usually do it on your own without too much trouble. Assuming that you’re moderately handy. Roofs are… A different matter. Depending on your roof type, pitch, and geographic location, it can either be fairly easy, or require a high degree of expertise.


Go to an actual archery store to get fitted and try some out; read reviews in Bowhunter magazine. A lot of the differences are pretty marginal for new users. Current bows have a pretty amazing drop-off rate, which makes it very easy to hold at full-draw. But you do need upper body strength the get to the drop-off point.
If you’re talking real, serious, the-end-of-the-world-as-we-know-it apocalypse, then I’d recommend getting either a fiberglass recurve bow in the 80#+ range and a few spare strings, or a Mossberg Shockwave and a single shell. The fiberglass recurve bow will be difficult to learn to shoot effectively, but it essentially maintenance-free. The Mossberg will prevent you from having to learn to use the bow effectively.


I have a very strong preference to the silicone triple-flange ear tips. They help block outside noise and fit comfortably. Unfortunately, they also don’t work with many ear buds. Shure is one of the few brands that they work with for certain.


The fact that the cancelled in the face of public pressure means nothing; they can always resume the partnership once the pressure subsides.


10% is pretty close to a controlling interest, since many shares never vote at meetings.


Ask them if they’ve read Ammon Bundy’s piece about immigration, and ask them what they think of it. Keep in mind that Bundy is pretty far right in almost every way, but almost all of his right-wing militia buddies have abandoned him on this.
IMO he’s arrived at the right conclusion, but his reasons–because god–are nonsense. It’s going to be interesting to see how his worldview changes as he realizes that most of the people that he thought were True Believers like him were only allies of convenience.


In my job, I need to use materials that have a mil spec; that means it’s literally military grade, but it’s just saying that it meets or exceeds a certain specification for X product that is used in the military in some way. IMO, if something says ‘military grade’, but isn’t listing the mil spec(s) that it complies to, then it’s essentially meaningless.
I do have a compass that I think was advertised as military grade. It’s the same lensatic compass that is currently used by the military (…when they aren’t using GPS…), except that it doesn’t use tritium on the face. The half-life of tritium is about a decade, so it didn’t seem like a great idea to pay a ton extra for something that would barely glow in the dark in 20 years or so.


That’s like saying that it’s inevitable that murder and rape will happen.
Just because someone is going to do it eventually doesn’t mean that you shouldn’t have the death penalty for doing it.
The proprietary cartridge design kills it, IMO. It’s like making a super-gucci AR-15, but then it only uses your mags, and your mags cost $150/ea., v. $20 for a Magpul.
Don’t fucking buy Mira products; they’re overpriced Czech surplus. The OM-90 is the Czech designation for Mira’s CM-7M, and you can get them for $90 on eBay, vs. the $450 or so that Mira charges.
Honestly, get yourself an M-40 that’s in good shape, buy a 40mm-to-3M-bayonet adapter, use some 3M P-100 cartridges (you can get them for about $2/ea. when you buy in bulk). P-100 will filter out all particulates–even finer particulates than a HEPA filter or N-95–and will also filter out water- and oil-based aerosols. That covers all riot-control agents, because CN, CS, and OC are all aerosols, and not true gasses. Almost any surplus gas mask that’s been made in the last ~30 years, seals, and uses a 40mm NATO cartridge is going to be just fine for riot-control agents.
If you are really worried about a P-100 filter being insufficient, get a few new old-stock NBC filters. NBC (nuclear, biological, chemical) filters were phased out about 15-20 years ago in favor of CBRN (chemical, biological, radiological, nuclear) filters, but if they haven’t been used, they’ll be absolutely okay for riot agents.
If you wear glasses–and many people do–get a spectacle insert for whatever mask you have. Glasses break the seal, and while you will probably be fine with contacts in, that’s not necessarily a good risk to take. Supposedly the Kris Optical Mag-1 glasses can be worn under a mask without compromising the seal, but I can’t personally attest to that. I think that they’re one of the older styles of BCGs that were issued, but I’m not sure.
Oh, and get GOOD hearing protection. Consider high-end electronic ear muffs, and wearing ear plugs under them. Some places are using LRADs to disperse crowds, and those can wreck your hearing.
N95 is insufficient. You want a P100 filter cartridge; P100 will filter out oil-based and water-based aerosols, as well as all particulates. They will not filter out true gasses, but, good news!, CN, CS, and OC are all aerosols, not gasses.
Nazis should get a platform. A platform with a short drop and very sudden stop.