用usb线模拟串口,再用作虚拟网口

最新推荐文章于 2026-01-16 12:54:54 发布

原创最新推荐文章于 2026-01-16 12:54:54 发布 · 2.6k 阅读

1 ·

本内容遵循CC 4.0 BY-SA版权协议

标签

#up

收录于

本文展示了通过sudo命令查看Linux系统中loopback接口lo及PPP接口ppp0的状态详情，并展示了/etc/ppp/options文件的内容，该文件用于配置PPP连接。

sudo /usr/sbin/pppd

/sbin/ifconfig

lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1605 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1605 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4569508 (4.3 MiB) TX bytes:4569508 (4.3 MiB)

ppp0      Link encap:Point-to-Point Protocol
          inet addr:10.1.24.72 P-t-P:10.1.24.111 Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1490 Metric:1
          RX packets:32 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:1979 (1.9 KiB) TX bytes:2065 (2.0 KiB)

10.1.24.72：
cat /etc/ppp/options
[desktopsh2 ~]$ cat /etc/ppp/options
# /dev/fpga_nb1_data
/dev/ttyUSB2
921600
mtu 1490
asyncmap 0
persist
passive
crtscts
#debug
10.1.24.72:10.1.24.111
#nodetach
ktune
proxyarp
defaultroute

our board
# cat /etc/ppp/options
/dev/ttyS1
921600
mtu 1490
persist
asyncmap 0
crtscts
noauth
defaultroute