Ubuntu12.04 & Fedora10 上安装配置 Asterisk-13

### 下载源码包
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz

### ./configure
1. configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing)

解决办法: sudo apt-get install ncurses-dev

2. configure: error: *** uuid support not found (this typically means the uuid development package is missing)

解决办法: sudo apt-get install uuid-dev

3. configure: error: *** JSON support not found (this typically means the libjansson development package is missing)

解决办法: sudo apt-get install libjansson-dev

4. configure: *** The Asterisk menuselect tool requires the 'libxml2' development package.
configure: *** Please install the 'libxml2' development package.

解决办法: sudo apt-get install libxml2-dev

5. configure: error: *** Asterisk now uses SQLite3 for the internal Asterisk database.

解决办法: sudo apt-get install libsqlite3-dev

### make

### sudo make install

### sudo make samples

### 从menuselect安装额外的语音提示
make menuselect
sudo make install

### 配置sip.conf 
同时支持IPv4 IPv6
udpbindaddr=::


在文件最后添加上：
[1001]
type=friend
secret=1001
host=dynamic
context=wdl
nat=no  ;表示服务器和客户端之间没有NAT设备

canreinvite=yes  ;允许RTP数据流不经过服务器

                ; 如果使用了NAT，该项必须设为no，使媒体流经过服务器

[1002]

type=friend
secret=1002
host=dynamic
context=wdl

[2001]
type=friend
secret=2001
host=dynamic
context=wdl

[2002]
type=friend
secret=2002
host=dynamic
context=wdl

### 配置extensions.conf
在文件最后添加上：
[wdl]
exten => 1001,1,Dial(SIP/1001)
exten => 1002,1,Dial(SIP/1002)
exten => 2001,1,Dial(SIP/2001)
exten => 2002,1,Dial(SIP/2002)

### debug启动Asterisk
/usr/sbin/asterisk -vvvvcg

### Asterisk管理 
登录到Asterisk服务器运行控制台: asterisk -crvvv 
查看登录用户: *CLI>sip shwo peers 
查看详细记录: *CLI>sip show peer 1001 
重新加载拨号方案: *CLI>dialplan reload 
重新加载SIP方案: *CLI>sip reload

### Asterisk 自动启动
chkconfig asterisk on
chkconfig --list

### WinXP ipv6
ipv6 setup
关掉dhcp方式:
>netsh interface ipv6 set privacy disabled
设置ipv6地址:           
>netsh interface ipv6 add address  "本地连接 2"  2001:da8:2015:828::23:35  unicast

>netsh interface ipv6 del address  "本地连接"  2001:da8:2015:828::23:35


### Ubuntu 12.04
sudo apt-get update
关闭防火墙：sudo ufw disable
# vim /etc/network/interfaces
auto lo 
iface lo inet loopback 
auto eth0 
iface eth0 inet6 static
　　　address 2001:da8:2:10d::2
　　　netmask 64
　　　up route -A inet6 add default gw 2001:da8:2:10d::1 dev $IFACE
iface eth0 inet static
　　　address 58.1.4.74
　　　netmask 255.255.255.0
      up route add default gw 58.1.4.1 dev $IFACE 


### Fedora 10
# vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
HWADDR=b8:ac:6f:97:ed:c3
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
PEERDNS=yes
NM_CONTROLLED=yes
TYPE=Ethernet
NETMASK=255.255.224.0
IPADDR=172.16.23.168
GATEWAY=172.16.23.200
DNS1=202.103.24.68
DNS2=8.8.8.8
IPV6INIT=yes
IPV6_AUTOCONF=no
IPV6ADDR=2001:abc::172:16:23:168/64


# vim /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
#HOSTNAME=server4
#GATEWAY=202.120.1.254
#IPV6_DEFAULTGW=2001:da8:8003:801::1%eth0 


### WinXP
x-lite:
http://counterpath.s3.amazonaws.com/downloads/X-Lite_Win32_4.5.5.2_76432.exe


### Phone support ipv6
linphone: (linux/windows)
http://download-mirror.savannah.gnu.org/releases/linphone/3.8.x/win32/Linphone-3.8.5-win32.exe

# Check "Allow IPv6"

# Configure SIP Account

eyebeam
kphone