Domain 2 is the hands-on heart of the CCNA. Network Access is a 20 percent block of the 200-301 exam, and unlike the concepts in Domain 1, almost every topic here is something you configure on a switch: VLANs, trunks, spanning tree, EtherChannel, and the wireless that rides on top. This practice test pulls questions from across the whole domain so you can find the gaps while they are still cheap to fix.
The questions are the same validated items from the per-topic quizzes across this series. Every one was checked in a GNS3 lab or against Cisco documentation, every answer has a written explanation, and the test draws a fresh thirty-question mix each time you retake it.
Current as of June 2026, matched to the live CCNA 200-301 (v1.1) Network Access exam topics.
How to use this practice test
Run the whole set, then read the explanation on every question, including the ones you got right on a hunch. A practice test is only worth the topics it sends you back to study. When a question exposes a gap, open the matching guide in the topic list below, work through it, then retake the test for a new draw.
Treat anything under about 85 percent as a signal to review that topic before exam day. Spanning tree and trunking trip up the most people here, usually because of a detail (a native VLAN mismatch, a blocked port, a mode that will not negotiate) rather than the big idea, so read those explanations closely.
Take the Domain 2 practice test
Thirty questions, drawn at random from the full Domain 2 bank and re-sampled on every retake:
Once you can clear this consistently, you have a real working grip on Network Access. Use the topic list below to shore up anything that tripped you.
What Domain 2 covers
Every sub-topic in this practice test has a full hands-on guide with real Cisco output. Work through any that the test exposed as weak:
VLANs and trunking are the base of the whole domain. Start with configuring VLANs, then carry them between switches with 802.1Q trunking, where the native VLAN and the allowed list earn most of the troubleshooting time.
Discovery and redundancy: map what is connected with CDP and LLDP, stop Layer 2 loops with Rapid PVST+ spanning tree, and turn redundant links into bandwidth with EtherChannel.
Wireless: the Cisco wireless architectures and AP modes cover how access points are controlled, building on the radio side from wireless networking fundamentals.
Where to go after Domain 2
Network Access is where the CCNA starts rewarding hands-on practice over memorization, so retake this set until the configuration details are reflex. When you can pass it comfortably, the CCNA 200-301 study roadmap lays out the rest of the path, IP Connectivity, IP Services, Security Fundamentals, and Automation, with the same mix of tested guides and practice questions for each domain.
