Yeah it’s pretty straightforward.

I do use a lot of CLI for ZFS because it’s pretty easy.

https://kurutoga.com/kuru-toga-advance-advance-upgrade/

I have the Kuru Toga for about 3 years during my Civil Engineering undergrad.

It’s fantastic although the tip is a little less stable than normal fixed points.

I have been spoiled by the rotating tip. I have the UNI M51017 1P.43 version. (I also got the Ghibli version)

I also have a rotring 600 but that’s out of your budget. And honestly it’s too expensive for me to justify bringing with me. It stays at home.

Open Media Vault with OMV Extras

I have it on Proxmox. Works like a charm

Any any that mofo

https://github.com/dedicatedcode/reitti

I currently use Reitti and it has immich integration

Maybe I’m blind, but is there a docker composed YAML?

Would like to reverse proxy this into my VPS.

I have 3 main NASes

78TB (52TB usable) hot storage. ZFS1

160TB (120TB) warm storage ZFS2

48TB (24TB) off site. ZFS mirror

I rsync every day from hot to off site.

And once a month I turn on my warm storage and sync it.

Warm and hot storage is at the same location.

Off site storage is with a family friend who I trust. Data isn’t encrypted aside from in transit. That’s something else I’d like to mess with later.

Core vital data is sprinkled around different continents with about 10TB. I have 2 nodes in 2 countries for vital data. These are with family.

I think I have 5 total servers.

Cost is a lot obviously, but pieced together over several years.

The world will end before my data gets destroyed.

There is portainer. CLI until you install portainer then everything is GUI based.

A wire with a screw. Like the aviation industry.

I would like to bring the attention to LoRa.

Meshtastic is a good example of leveraging LoRa.

I just use adguard home. Worker a little better in my docker setup.

I used to have a 5700G system that I had to switch out to a 14600k system due to quciksync pass through.

I got my 14600K down to 55w from 75w with everything else being equal. Insane how efficient some setups can be.

My 16tb Pi sips at 13w max or 8w idle. But no encoding or enough storage for normal work. So it’s warm storage

We use Tailscale to share between accounts.

But for large transfers I use an encrypted HDD.

I selfhost immich in a netcup VPS. They have a 2tb VM for about 22 euros a month via a black Friday sale

I’m on a 1tb arm plan for about 10 euros a month.

It seems like smores to me ¯_(ツ)_/¯

I am running Jellyfin in an Open Media Vault VM on top of Proxmox.

Jellyfin is in docker in OMV.

All disks are mounted in OMV and then mounted in Docker.

I have a 14600k that has an iGPU passthrough and it works fine. (Same generation iGPU I think)

mkdir /lib/firmware/i915/
cd /lib/firmware/i915/
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/adls_dmc_ver2_01.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_guc_70.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_guc_70.1.1.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_huc.bin
update-initramfs -u

Then try this docker container to see if encoding works

docker run --rm ghcr.io/linuxserver/ffmpeg ffmpeg -hwaccels

Run the container

docker run --rm \
  --device /dev/dri:/dev/dri \
  --entrypoint ffmpeg \
  ghcr.io/linuxserver/ffmpeg \
  -init_hw_device qsv=hw:/dev/dri/renderD128 \
  -hwaccel qsv -hwaccel_device hw -hwaccel_output_format qsv \
  -f lavfi -i testsrc=duration=3:size=1280x720:rate=30 \
  -vf 'format=nv12,hwupload=extra_hw_frames=64' \
  -c:v h264_qsv -f null -

I’m on mobile so formatting maybe shit. But I think you can get the right idea with this.

I use a Sierra Wireless EM9293 with a USB3 to M.2 Key B 4G 5G Modem Adapter Enclosure with SIM Card Slot - V7 from Wireless Haven.

Impressive kit and costs me about 300 in parts.

Works natively with my Mikrotik USB port.

5G as in cellular?

I use MikroTik with a USB CAT 20 modem.

Client side or server side?

Reverse proxy if your home internet is decent.

50mbps upload is fine for me.

I had it running on a mini PC with 8tb of storage, but I couldn’t get the latency down to where I want it, so I moved it to a VPS.