DIY Pochade Box

Mini quest Complete!

   Sometime in January 2016, I decided to make a multi-purpose pochade box that I can use with oil, acrylic or gouache. I estimated I would be able to finish it within a year and even started documenting the process. Sometimes life happens and goals are met with resistance, priorities took over and the project was temporarily set aside. Fast forward to today, with some elbow grease and perseverance, I was able to finish the box and am now writing this article.

     This box is mostly inspired by existing designs from all over the net, especially the Alla Prima Pochade Box.

DIY Watercolor Easel Update

     Sometime in 2014 when I was just starting my art journey, I've made a post regarding a DIY watercolor easel. It served me well for my purpose, and it is still being used up until now. 
     As preferences and style of working became clearer, I realized that it is still possible to make the setup lighter by getting rid of the plywood board and replacing it with something to hold my support board which in most cases I always bring. Let me share with you the updated version  of the ease

The old board was replaced with a wooden arm and the tray is made of aluminum sheet that is lighter and easier to remove.

DIY WaterColor Easel

      Sketching outside is already a challenge in itself. Add the distractions, weather, insects, fatigue. I've decided that I could reduce that challenge by introducing something that I can control. Comfort. In line with this, I have decided to make a portable and lightweight watercolor easel. The tripod that I used was bought from CDR-King. Unfortunately tripods with round leg was not available during that time so I settled for the one with square legs.

DIY watercolor easel

     To make this easel, I've used a quarter inch plywood, a T-nut (1/4" 20 tpi), and a cheap tripod. The screenshots below show how the wood was cut and assembled but feel free to make adjustments based on your requirement.

T_Nut  assembly

       The piece that will hold the water-bottle and paint was not successfully cut, I had to scrap the first one and cut another.

These are the two configuration I mostly see on the internet. I thought that the pattern on the left would be much easier to execute. I believe that the pattern on the right would provide the best grip and would experiment on  making another one.