✨ Promote Single Own Feature Gate AND Config spec in the CR to GA (OPRUN-4098)

api/v1/clusterextension_types.go

@@ -106,7 +106,6 @@ type ClusterExtensionSpec struct {
 	// a configuration schema the final manifests will be derived on a best-effort basis. More information on how
 	// to configure the bundle should be found in its end-user documentation.
 	//
-	// <opcon:experimental>
 	// +optional
 	Config *ClusterExtensionConfig `json:"config,omitempty"`
 }

docs/api-reference/olmv1-api-reference.md

@@ -343,7 +343,7 @@ _Appears in:_
 | `serviceAccount` _[ServiceAccountReference](#serviceaccountreference)_ | serviceAccount is a reference to a ServiceAccount used to perform all interactions<br />with the cluster that are required to manage the extension.<br />The ServiceAccount must be configured with the necessary permissions to perform these interactions.<br />The ServiceAccount must exist in the namespace referenced in the spec.<br />serviceAccount is required. |  | Required: \{\} <br /> |
 | `source` _[SourceConfig](#sourceconfig)_ | source is a required field which selects the installation source of content<br />for this ClusterExtension. Selection is performed by setting the sourceType.<br /><br />Catalog is currently the only implemented sourceType, and setting the<br />sourcetype to "Catalog" requires the catalog field to also be defined.<br /><br />Below is a minimal example of a source definition (in yaml):<br /><br />source:<br />  sourceType: Catalog<br />  catalog:<br />    packageName: example-package |  | Required: \{\} <br /> |
 | `install` _[ClusterExtensionInstallConfig](#clusterextensioninstallconfig)_ | install is an optional field used to configure the installation options<br />for the ClusterExtension such as the pre-flight check configuration. |  |  |
-| `config` _[ClusterExtensionConfig](#clusterextensionconfig)_ | config is an optional field used to specify bundle specific configuration<br />used to configure the bundle. Configuration is bundle specific and a bundle may provide<br />a configuration schema. When not specified, the default configuration of the resolved bundle will be used.<br /><br />config is validated against a configuration schema provided by the resolved bundle. If the bundle does not provide<br />a configuration schema the final manifests will be derived on a best-effort basis. More information on how<br />to configure the bundle should be found in its end-user documentation.<br /><br /><opcon:experimental> |  |  |
+| `config` _[ClusterExtensionConfig](#clusterextensionconfig)_ | config is an optional field used to specify bundle specific configuration<br />used to configure the bundle. Configuration is bundle specific and a bundle may provide<br />a configuration schema. When not specified, the default configuration of the resolved bundle will be used.<br /><br />config is validated against a configuration schema provided by the resolved bundle. If the bundle does not provide<br />a configuration schema the final manifests will be derived on a best-effort basis. More information on how<br />to configure the bundle should be found in its end-user documentation. |  |  |
 
 
 #### ClusterExtensionStatus

docs/draft/howto/single-ownnamespace-install.md

@@ -1,8 +1,7 @@
 ## Description
 
 !!! note
-This feature is still in *alpha* the `SingleOwnNamespaceInstallSupport` feature-gate must be enabled to make use of it.
-See the instructions below on how to enable it.
+The `SingleOwnNamespaceInstallSupport` feature-gate is enabled by default. Use this guide to configure bundles that need Single or Own namespace install modes.
 
 ---
 
@@ -31,28 +30,6 @@ include *installModes*.
 
 [![OwnNamespace Install Demo](https://asciinema.org/a/Rxx6WUwAU016bXFDW74XLcM5i.svg)](https://asciinema.org/a/Rxx6WUwAU016bXFDW74XLcM5i)
 
-## Enabling the Feature-Gate
-
-!!! tip
-
-This guide assumes OLMv1 is already installed. If that is not the case,
-you can follow the [getting started](../../getting-started/olmv1_getting_started.md) guide to install OLMv1.
-
----
-
-Patch the `operator-controller` `Deployment` adding `--feature-gates=SingleOwnNamespaceInstallSupport=true` to the
-controller container arguments:
-
-```terminal title="Enable SingleOwnNamespaceInstallSupport feature-gate"
-kubectl patch deployment -n olmv1-system operator-controller-controller-manager --type='json' -p='[{"op": "add", "path": "/spec/template/spec/containers/0/args/-", "value": "--feature-gates=SingleOwnNamespaceInstallSupport=true"}]'
-```
-
-Wait for `Deployment` rollout:
-
-```terminal title="Wait for Deployment rollout"
-kubectl rollout status -n olmv1-system deployment/operator-controller-controller-manager
-```
-
 ## Configuring the `ClusterExtension`
 
 A `ClusterExtension` can be configured to install bundle in `Single-` or `OwnNamespace` mode through the

docs/draft/tutorials/explore-available-content-metas-endpoint.md

@@ -91,9 +91,6 @@ Then you can query the catalog by using `curl` commands and the `jq` CLI tool to
         ...
         ```
 
-    !!! important
-        OLM 1.0 supports installing extensions that define webhooks. Targeting a single or specified set of namespaces requires enabling the `SingleOwnNamespaceInstallSupport` feature-gate.
-
 3. Return list of packages which support `AllNamespaces` install mode, do not use webhooks, and where the channel head version uses `olm.csv.metadata` format:
 
     ``` terminal

docs/project/olmv1_limitations.md

@@ -8,7 +8,7 @@ hide:
 Currently, OLM v1 only supports installing operators packaged in [OLM v0 bundles](https://olm.operatorframework.io/docs/tasks/creating-operator-bundle/)
 , also known as `registry+v1` bundles. Additionally, the bundled operator, or cluster extension:
 
-* **must** support installation via the `AllNamespaces` install mode
+* **must** support installation via the `AllNamespaces`, `SingleNamespace`, or `OwnNamespace` install modes. 
 * **must not** declare dependencies using any of the following file-based catalog properties:
     * `olm.gvk.required`
     * `olm.package.required`

docs/tutorials/explore-available-content.md

@@ -91,9 +91,6 @@ Then you can query the catalog by using `curl` commands and the `jq` CLI tool to
         ...
         ```
 
-    !!! important
-        OLM 1.0 supports installing extensions that define webhooks. Targeting a single or specified set of namespaces requires enabling the `SingleOwnNamespaceInstallSupport` feature-gate.
-
 3. Return list of packages that support `AllNamespaces` install mode and do not use webhooks:
 
     ``` terminal

hack/demo/own-namespace-demo-script.sh

@@ -6,16 +6,14 @@
 set -e
 trap 'echo "Demo ran into error"; trap - SIGTERM && kill -- -$$; exit 1' ERR SIGINT SIGTERM EXIT
 
-# install experimental CRDs with config field support
-kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/experimental.yaml"
+# install standard CRDs
+echo "Install standard CRDs..."
+kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/standard.yaml"
 
-# wait for experimental CRDs to be available
+# wait for standard CRDs to be available
 kubectl wait --for condition=established --timeout=60s crd/clusterextensions.olm.operatorframework.io
 
-# enable 'SingleOwnNamespaceInstallSupport' feature gate
-kubectl patch deployment -n olmv1-system operator-controller-controller-manager --type='json' -p='[{"op": "add", "path": "/spec/template/spec/containers/0/args/-", "value": "--feature-gates=SingleOwnNamespaceInstallSupport=true"}]'
-
-# wait for operator-controller to become available
+# Ensure controller is healthy
 kubectl rollout status -n olmv1-system deployment/operator-controller-controller-manager
 
 # create install namespace
@@ -57,17 +55,6 @@ kubectl delete clusterextension argocd-operator --ignore-not-found=true
 kubectl delete namespace argocd-system --ignore-not-found=true
 kubectl delete clusterrolebinding argocd-installer-crb --ignore-not-found=true
 
-# remove feature gate from deployment
-echo "Removing feature gate from operator-controller..."
-kubectl patch deployment -n olmv1-system operator-controller-controller-manager --type='json' -p='[{"op": "remove", "path": "/spec/template/spec/containers/0/args", "value": "--feature-gates=SingleOwnNamespaceInstallSupport=true"}]' || true
-
-# restore standard CRDs
-echo "Restoring standard CRDs..."
-kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/base.yaml"
-
-# wait for standard CRDs to be available
-kubectl wait --for condition=established --timeout=60s crd/clusterextensions.olm.operatorframework.io
-
 # wait for operator-controller to become available with standard config
 kubectl rollout status -n olmv1-system deployment/operator-controller-controller-manager
 

hack/demo/single-namespace-demo-script.sh

@@ -6,16 +6,14 @@
 set -e
 trap 'echo "Demo ran into error"; trap - SIGTERM && kill -- -$$; exit 1' ERR SIGINT SIGTERM EXIT
 
-# install experimental CRDs with config field support
-kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/experimental.yaml"
+# install standard CRDs
+echo "Install standard CRDs..."
+kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/standard.yaml"
 
-# wait for experimental CRDs to be available
+# wait for standard CRDs to be available
 kubectl wait --for condition=established --timeout=60s crd/clusterextensions.olm.operatorframework.io
 
-# enable 'SingleOwnNamespaceInstallSupport' feature gate
-kubectl patch deployment -n olmv1-system operator-controller-controller-manager --type='json' -p='[{"op": "add", "path": "/spec/template/spec/containers/0/args/-", "value": "--feature-gates=SingleOwnNamespaceInstallSupport=true"}]'
-
-# wait for operator-controller to become available
+# Ensure controller is healthy
 kubectl rollout status -n olmv1-system deployment/operator-controller-controller-manager
 
 # create install namespace
@@ -60,17 +58,6 @@ kubectl delete clusterextension argocd-operator --ignore-not-found=true
 kubectl delete namespace argocd-system argocd --ignore-not-found=true
 kubectl delete clusterrolebinding argocd-installer-crb --ignore-not-found=true
 
-# remove feature gate from deployment
-echo "Removing feature gate from operator-controller..."
-kubectl patch deployment -n olmv1-system operator-controller-controller-manager --type='json' -p='[{"op": "remove", "path": "/spec/template/spec/containers/0/args", "value": "--feature-gates=SingleOwnNamespaceInstallSupport=true"}]' || true
-
-# restore standard CRDs
-echo "Restoring standard CRDs..."
-kubectl apply -f "$(dirname "${BASH_SOURCE[0]}")/../../manifests/base.yaml"
-
-# wait for standard CRDs to be available
-kubectl wait --for condition=established --timeout=60s crd/clusterextensions.olm.operatorframework.io
-
 # wait for operator-controller to become available with standard config
 kubectl rollout status -n olmv1-system deployment/operator-controller-controller-manager
 

helm/experimental.yaml

@@ -9,7 +9,6 @@ options:
   operatorController:
     features:
       enabled:
-        - SingleOwnNamespaceInstallSupport
         - PreflightPermissions
         - HelmChartSupport
         - BoxcutterRuntime

helm/olmv1/base/operator-controller/crd/standard/olm.operatorframework.io_clusterextensions.yaml

@@ -57,6 +57,45 @@ spec:
             description: spec is an optional field that defines the desired state
               of the ClusterExtension.
             properties:
+              config:
+                description: |-
+                  config is an optional field used to specify bundle specific configuration
+                  used to configure the bundle. Configuration is bundle specific and a bundle may provide
+                  a configuration schema. When not specified, the default configuration of the resolved bundle will be used.
+
+                  config is validated against a configuration schema provided by the resolved bundle. If the bundle does not provide
+                  a configuration schema the final manifests will be derived on a best-effort basis. More information on how
+                  to configure the bundle should be found in its end-user documentation.
+                properties:
+                  configType:
+                    description: |-
+                      configType is a required reference to the type of configuration source.
+
+                      Allowed values are "Inline"
+
+                      When this field is set to "Inline", the cluster extension configuration is defined inline within the
+                      ClusterExtension resource.
+                    enum:
+                    - Inline
+                    type: string
+                  inline:
+                    description: |-
+                      inline contains JSON or YAML values specified directly in the
+                      ClusterExtension.
+
+                      inline must be set if configType is 'Inline'.
+                      inline accepts arbitrary JSON/YAML objects.
+                      inline is validation at runtime against the schema provided by the bundle if a schema is provided.
+                    type: object
+                    x-kubernetes-preserve-unknown-fields: true
+                required:
+                - configType
+                type: object
+                x-kubernetes-validations:
+                - message: inline is required when configType is Inline, and forbidden
+                    otherwise
+                  rule: 'has(self.configType) && self.configType == ''Inline'' ?has(self.inline)
+                    : !has(self.inline)'
               install:
                 description: |-
                   install is an optional field used to configure the installation options

helm/tilt.yaml

@@ -14,7 +14,6 @@ options:
   operatorController:
     features:
       enabled:
-        - SingleOwnNamespaceInstallSupport
         - PreflightPermissions
         - HelmChartSupport
       disabled:

internal/operator-controller/features/features.go

@@ -33,8 +33,8 @@ var operatorControllerFeatureGates = map[featuregate.Feature]featuregate.Feature
 	// registry+v1 cluster extensions with single or own namespaces modes
 	// i.e. with a single watch namespace.
 	SingleOwnNamespaceInstallSupport: {
-		Default:       false,
-		PreRelease:    featuregate.Alpha,
+		Default:       true,
+		PreRelease:    featuregate.GA,
 		LockToDefault: false,
 	},
 

manifests/experimental-e2e.yaml

@@ -2188,7 +2188,6 @@ spec:
             - --health-probe-bind-address=:8081
             - --metrics-bind-address=:8443
             - --leader-elect
-            - --feature-gates=SingleOwnNamespaceInstallSupport=true
             - --feature-gates=PreflightPermissions=true
             - --feature-gates=HelmChartSupport=true
             - --feature-gates=BoxcutterRuntime=true

manifests/experimental.yaml

@@ -2101,7 +2101,6 @@ spec:
             - --health-probe-bind-address=:8081
             - --metrics-bind-address=:8443
             - --leader-elect
-            - --feature-gates=SingleOwnNamespaceInstallSupport=true
             - --feature-gates=PreflightPermissions=true
             - --feature-gates=HelmChartSupport=true
             - --feature-gates=BoxcutterRuntime=true

manifests/standard-e2e.yaml

@@ -648,6 +648,45 @@ spec:
             description: spec is an optional field that defines the desired state
               of the ClusterExtension.
             properties:
+              config:
+                description: |-
+                  config is an optional field used to specify bundle specific configuration
+                  used to configure the bundle. Configuration is bundle specific and a bundle may provide
+                  a configuration schema. When not specified, the default configuration of the resolved bundle will be used.
+
+                  config is validated against a configuration schema provided by the resolved bundle. If the bundle does not provide
+                  a configuration schema the final manifests will be derived on a best-effort basis. More information on how
+                  to configure the bundle should be found in its end-user documentation.
+                properties:
+                  configType:
+                    description: |-
+                      configType is a required reference to the type of configuration source.
+
+                      Allowed values are "Inline"
+
+                      When this field is set to "Inline", the cluster extension configuration is defined inline within the
+                      ClusterExtension resource.
+                    enum:
+                    - Inline
+                    type: string
+                  inline:
+                    description: |-
+                      inline contains JSON or YAML values specified directly in the
+                      ClusterExtension.
+
+                      inline must be set if configType is 'Inline'.
+                      inline accepts arbitrary JSON/YAML objects.
+                      inline is validation at runtime against the schema provided by the bundle if a schema is provided.
+                    type: object
+                    x-kubernetes-preserve-unknown-fields: true
+                required:
+                - configType
+                type: object
+                x-kubernetes-validations:
+                - message: inline is required when configType is Inline, and forbidden
+                    otherwise
+                  rule: 'has(self.configType) && self.configType == ''Inline'' ?has(self.inline)
+                    : !has(self.inline)'
               install:
                 description: |-
                   install is an optional field used to configure the installation options

manifests/standard.yaml

@@ -613,6 +613,45 @@ spec:
             description: spec is an optional field that defines the desired state
               of the ClusterExtension.
             properties:
+              config:
+                description: |-
+                  config is an optional field used to specify bundle specific configuration
+                  used to configure the bundle. Configuration is bundle specific and a bundle may provide
+                  a configuration schema. When not specified, the default configuration of the resolved bundle will be used.
+
+                  config is validated against a configuration schema provided by the resolved bundle. If the bundle does not provide
+                  a configuration schema the final manifests will be derived on a best-effort basis. More information on how
+                  to configure the bundle should be found in its end-user documentation.
+                properties:
+                  configType:
+                    description: |-
+                      configType is a required reference to the type of configuration source.
+
+                      Allowed values are "Inline"
+
+                      When this field is set to "Inline", the cluster extension configuration is defined inline within the
+                      ClusterExtension resource.
+                    enum:
+                    - Inline
+                    type: string
+                  inline:
+                    description: |-
+                      inline contains JSON or YAML values specified directly in the
+                      ClusterExtension.
+
+                      inline must be set if configType is 'Inline'.
+                      inline accepts arbitrary JSON/YAML objects.
+                      inline is validation at runtime against the schema provided by the bundle if a schema is provided.
+                    type: object
+                    x-kubernetes-preserve-unknown-fields: true
+                required:
+                - configType
+                type: object
+                x-kubernetes-validations:
+                - message: inline is required when configType is Inline, and forbidden
+                    otherwise
+                  rule: 'has(self.configType) && self.configType == ''Inline'' ?has(self.inline)
+                    : !has(self.inline)'
               install:
                 description: |-
                   install is an optional field used to configure the installation options